Hello,
Basically every time I turn on my PC I have to force shut it down by holding down the power button, disconnect my AIO, start it again, shut it down again and restart it again.
Then it'll finally POST and boot into login screen.
This started happening right after I installed my AIO, the H100i from Corsair. Now if I want to boot up I have to disconnect it(the AIO from the SATA cable chain on PSU), power the PC on with it unplugged and it'll boot up.
If I do all this without disconnecting it, it will just not reach POST. Ever.
Also, the computer WILL power up, AIO plugged in or not, everything spins, lights, everything starts running, but the monitor will light up and just go to 'No signal'. Peripherals turn on as well.
Another note: When it finally does reach a successful boot up, I hear the GPU and fans spin a bit louder than a failed boot up, then they just slow down to the regular speeds.
I highly doubt its my PSU but I haven't left that possibility out.
I have checked on all my hardware power draw and it doesn't draw over 675W at overclock.
I've tried adding another SATA cable chain and let it run on it's own cable, didn't work.
Tried changing around connections for fans and pump, nothing.
I have a total of 9 fans, a few on mother board maybe 3 and the rest on a fan hub.
I've attempted a few forums, nobodies been able to help. Please, if you have any insight, I would highly appreciate it.
Thanks!
Specs:
CPU: R9 3900x
GPU: RTX EVGA 2080Ti XC Ultra
PSU: Corsair RM850x
MOBO: ASUS Prime - P X570
RAM: 4x8GB G-Skill Trident Z Royal 3600MHz
AIO: Corsair H100i
9x Case Fans.
M.2 Samsung 970 EVO Plus 500gb
M.2 XPG 8600 1TB
HDD WD Blue 7200 1TB
Basically every time I turn on my PC I have to force shut it down by holding down the power button, disconnect my AIO, start it again, shut it down again and restart it again.
Then it'll finally POST and boot into login screen.
This started happening right after I installed my AIO, the H100i from Corsair. Now if I want to boot up I have to disconnect it(the AIO from the SATA cable chain on PSU), power the PC on with it unplugged and it'll boot up.
If I do all this without disconnecting it, it will just not reach POST. Ever.
Also, the computer WILL power up, AIO plugged in or not, everything spins, lights, everything starts running, but the monitor will light up and just go to 'No signal'. Peripherals turn on as well.
Another note: When it finally does reach a successful boot up, I hear the GPU and fans spin a bit louder than a failed boot up, then they just slow down to the regular speeds.
I highly doubt its my PSU but I haven't left that possibility out.
I have checked on all my hardware power draw and it doesn't draw over 675W at overclock.
I've tried adding another SATA cable chain and let it run on it's own cable, didn't work.
Tried changing around connections for fans and pump, nothing.
I have a total of 9 fans, a few on mother board maybe 3 and the rest on a fan hub.
I've attempted a few forums, nobodies been able to help. Please, if you have any insight, I would highly appreciate it.
Thanks!
Specs:
CPU: R9 3900x
GPU: RTX EVGA 2080Ti XC Ultra
PSU: Corsair RM850x
MOBO: ASUS Prime - P X570
RAM: 4x8GB G-Skill Trident Z Royal 3600MHz
AIO: Corsair H100i
9x Case Fans.
M.2 Samsung 970 EVO Plus 500gb
M.2 XPG 8600 1TB
HDD WD Blue 7200 1TB