So I just assembled a new PC today and cannot for the life of me figure out what’s going on.
Half the time it get stuck at the “press del to enter bios” screen and it won’t do anything. The other half of the time when I boot it tells me no display port found and the monitor turns off.
MoBo: Asus TUF X-570 pro wifi
CPU: 5600x
GPU: MSI 3070 Ventus 2X
RAM: 4x8GB GSkill Trident Z RGB 3200
AIO: NZXT X73 (I think it’s whatever the two fan infinity glass model is don’t feel like looking)
PSU: HX750
HDD: 2TB barracuda
M2: 1TB 970 Evo
The orange/yellow light for “DRAM” is always on. I’ve tried booting with 2 sticks of ram, and just 1 and it’s the same every time. I even tried some old sticks I had lying around and got the same issue.
There’s no bios flash button on this board FYI. Also tried removing all Sata connections
One thing I wasn’t super sure about was the 4 & 8 pin ATX connectors. The manual said to plug in the 24 pin as well as either the 8 or 4. Ive tried every combination but still no luck.
sorry if I missed anything I’m new to posting questions as this stumped me. Any help would be appreciated !
Half the time it get stuck at the “press del to enter bios” screen and it won’t do anything. The other half of the time when I boot it tells me no display port found and the monitor turns off.
MoBo: Asus TUF X-570 pro wifi
CPU: 5600x
GPU: MSI 3070 Ventus 2X
RAM: 4x8GB GSkill Trident Z RGB 3200
AIO: NZXT X73 (I think it’s whatever the two fan infinity glass model is don’t feel like looking)
PSU: HX750
HDD: 2TB barracuda
M2: 1TB 970 Evo
The orange/yellow light for “DRAM” is always on. I’ve tried booting with 2 sticks of ram, and just 1 and it’s the same every time. I even tried some old sticks I had lying around and got the same issue.
There’s no bios flash button on this board FYI. Also tried removing all Sata connections
One thing I wasn’t super sure about was the 4 & 8 pin ATX connectors. The manual said to plug in the 24 pin as well as either the 8 or 4. Ive tried every combination but still no luck.
sorry if I missed anything I’m new to posting questions as this stumped me. Any help would be appreciated !