Question RGB not working properly after installing a new PSU ?

[ZeroDay1020]

Hello

After realizing that my 750w PSU was faulty and dropping random BSOD, I decided to buy a new 850w PSU and after plugging it in my PC was working like a swiss clock, but I realized that all my RGB case fans (corsair QL) and fans for my AiO (gigabyte waterforce 280mm) and LED on the pump itself were not working properly. They are like in some stuck state. icue and GCC recognize the fans but still dont change to the color I picked.

 

[Ralston18]

Update your post to include full system hardware specs andOS information.

Did you use only the cables that came with the new PSU?

Doublecheck all connectors and connections via the applicable motherboard's User Guide/Manual.

 

[ZeroDay1020]

Update your post to include full system hardware specs andOS information.

Did you use only the cables that came with the new PSU?

Doublecheck all connectors and connections via the applicable motherboard's User Guide/Manual.

PC specs
Motherboard: Gigabyte aorus master z590
GPU:Gigabyte aorus master RTX 3070
CPU: i7 10700k
RAM: 32gb ddr4 320mhz
PSU:Gigabyte 850w 80+ Gold
Cooling: Gigabyte waterforce 280mm

 

[Ralston18]

Motherboard User Manual:

https://download.gigabyte.com/FileL...230525.pdf?v=1aba81da0ae4fa877bb15b039572df9e

[Note: be sure to verify that I found the applicable manual.]

Review the entire manual and confirm that all connections are correct especially those for fans and LEDs.Pages 27-29 being the most applicable to the posted problem.

Match connectors, cables, and pins to ensure that all are correct.

Then, if necessary, reinstall the controlling software.

Lastly, clear CMOS per the procedure on Page 37 and reconfigure BIOS as required.

PSU cables: did you use only the cables that came with the new PSU?

 

[ZeroDay1020]

Update your post to include full system hardware specs andOS information.

Did you use only the cables that came with the new PSU?

Doublecheck all connectors and connections via the applicable motherboard's User Guide/Manual.

Yes I did use the cables that came with the new PSU