Question Stuck in bsod loop stopcode:INACESSABEL_BOOT_DEVICE

[ForsakenDot]

Hi, I just tried to set up dual windows boot on 2 internal ssds and now my laptop is stuck in a bsod loop.
I got a new 1 tb ssd and wanted to move windows on that one. I decided to do a fresh install to get a Clean c drive so I installed windows 11 to a partition in the new ssd planning to remove the pld one later and rearranging some files. Then I tried to boot from that ssd and it gave the error: iNACESSABEL_BOOT_DEVICE
Now it's stuck in this bsod loop and I can only access bios.

Attempts to fix:
1. Reset bios to defaults
2. Tried to enter WinRE through all methods but none worked
3. Made a bootable USB but it only reads its own partitions(even though bios recognizes both ssds) and not the ssds in the process of installation and revocery attempts through cmd
4. Removed each disk one by one:
Remove oem ssd: no boot device found
Remove new ssd: doesn't go beyond POST and BIOS, just restarts before attempting to start windows. Also swapped pcie ports of both ssds and nothing changed(neither is damaged)
5. Disabled fast boot and VDM, register all ports on VDM

I have checked the bios and it doesn't have the option to select the drive to boot from but just USB and windows boot manager which leads to the problem. If there is some setting that can reset the configurations of WBM please help me identify them in the bios.
Due to the fact that I can only enter the recovery mode in the USB and it only uses that drive, many troubleshooting command line tools are unavailable

Device specs:
Acer PHN16-71
OS: Windows 11 24H2 (last working one)
BIOS: v1.18

 

[helpstar]

set BIOS to usb boot
remove ssd, leave the new ssd
try installing Windows again
try Windows Media creation tool with the USB drive and boot from it