Question total throughput of a typical router

velocci

Distinguished
Dec 10, 2005
1,023
16
19,285
Hi all, I'm thinking of getting the Netgear RS200 which has a 2.5Gbps WAN port and four 1Gbps lan ports. if I have a bunch of gigabit wired devices connected to this router (either directly or using a switch), is the router capable of routing a total of 2.5Gbps of data between all my wired devices or it can only do a total of 1Gbps of data?
 

Aeacus

Titan
Ambassador
For a 2.5G WAN port, max bandwidth is 2500 Mbps. And for router, that means all connected devices combined.

Maximum what each device can achieve, is 1000 Mbps, since they all are connected to 1G ports. Up to 2 devices can comfortably use the max bandwidth. If 3 devices want to use max bandwidth, it drops to ~833 Mbps per one device. If 4 devices use the connection at the same time, then ~625 Mbps per device.

It is rare to have 3-4 devices utilizing the connection at their fullest. So, for most usage scenarios, this 2.5G output + 4x 1G input ports is more than enough. Unless you put all 4 devices to download big file size stuff at the same time.
 
  • Like
Reactions: velocci
The end devices would also need 6ghz support.

You might consider wifi6e rather than wifi7. Wifi7 has big issues getting the really high speeds they claim. It will work in the same room but then you might as well use ethernet cables. To get the maximum speeds it needs to be able to use 320mhz radio bands and it seems to have a lot of issues doing that well with walls etc inbetween.

I do not know about the router you list but the other feature they claim wifi7 has is the ability to use 2.4,5 and 6 ghz radios at the same time and combine them. I have never seen a end device that has this ability, it would be fairly expensive because they need 3 radio chips rather than just 1 that can run on any frequencies. I doubt things like cell phones will ever have it because of the extra space the chips will take up.
 

kanewolf

Titan
Moderator
Hi all, I'm thinking of getting the Netgear RS200 which has a 2.5Gbps WAN port and four 1Gbps lan ports. if I have a bunch of gigabit wired devices connected to this router (either directly or using a switch), is the router capable of routing a total of 2.5Gbps of data between all my wired devices or it can only do a total of 1Gbps of data?
Only a review, that tests it, can reliably tell you that.