aio

I have an H510 Case w/ a Kraken x53, radiator is in the front of the case pulling air in and the rear two fans are set as exhaust. The hot air over the radiator is heating up my GPU a good amount. The previous setup w/ air I was seeing GPU temps in the low 70s, now GPU temps are hitting the low...

I am thinking of buying a AIO for my cpu and I think I have found a good one which is the deepcool castle 240rgb v2, but I have done some research and can't find if it works with my motherboard which is the msi b450 mortar max. Any ideas if it works or not.

I recently had to change my case and chose to go with a smaller one as the full tower i had was pretty big I now have a midi and i ran into a problem my CPU AIO doesnt have space to mount on top so i had to mount it on the front, i have intake fans mounted in front of the AIO and the AIO blowing...

Hi there, I installed my Corsair H150i RGB Pro XT last night. Selected hardware specs for reference: CPU: AMD Ryzen 5 3600 3.6 GHz Motherboard: Asus TUF GAMING B550M-PLUS Micro ATX AM4 Memory: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3600 CL18 Memory Case: Lian Li PC-O11 Dynamic ATX Full...

I not have any AIO but sawing the news of the North comes this fun question, Can an AIO get froozen?

So when I launched Wolfenstein The New Colossus I noticed that my fans ramped up and became quite loud, so I checked the temps and saw that my CPU usage is jumping around 40% and the temperature is around 67°C however it kept on jumping for a second to much higher temperatures, I even saw it hit...

I have an NZXT Kraken X52 running on my CPU with no problems however I am currently trying to install a second Kraken (an X53 via an NZXT G12) on my GPU. I am not sure where the tach/pump header should go for this second one and was curious how others have set this up. Google and Youtube have...

Hello All, I have the NZXT H210. Anyone rocking a 10850k in this case? how are the thermals? going to use the stock case fans that come with the case on default orientation for now. I'm eyeing a: i9 10850k paired with an NZXT Kraken x53 240mm Aio otherwise I'll just go i7 10700 if the i9 would...

Is it almost gurantted that the aio's fan or pump will fail first before there being a leakage failure? Will an AIOs pump/fan fail around the same time as a normal cpu fan because they have similar warranties? Basically, will an aio be just as safe as a fan if I use them till they stop working?

Would it be bad to use a aio cooler (even if it is a reliable one like corsair) for 10 years or more? I would not have the pc running constantly, only when I am using it for gaming. Also, does it increase the chances of the water coming out if it lasts that long?

Here’s my parts: - MSI Meg ace mobo -5900x Ryzen 9 evga ftw3 3090 1000w evga psu tridentz royal 4000 32gb I just turn it on and it starts to rise. I can finish windows install because of it. I go into the bios and put all the fans on max and it sits at 83c. Idk what to do I’m new to building...

Can I clean an aio cpu cooler without having to remove it? Can I just use compressed air to clean the fan and radiator? Does cleaning it regularly (once a year or more often) allow me to not have to do more intense cleaning which might include having to remove it?

Hi all, I'm doing my 2nd build and I'm having some CPU cooling issues that I haven't seen before. My setup is a NZXT x73 Kraken AIO (mounted at the top of the case, tubes down), AMD 5800x CPU, Gigabyte Vision B550 D (v1.0) motherboard My pc will boot to bios just fine, and I can start a windows...

Hi everyone, I wanna ask if this RPM for my AIO pump and the AIOs Fans are normal? The CPU or CPU_FAN is where I connected my AIOs fans and the CPU_OPT is where I connected the AIO pump I'm using Auraflow x 360 and Ryzen 5 3600 (I'm averaging at 37-42degrees)

Help. so recently my motherboard shorted, after me unboxing and installing the new motherboard my aio water-cooler stopped showing rgb The fans are spinning but no rgb i have tried multiple different fixes that include plugging things into the controller PLEASE HELP......!

Hello! I am using a Ryzen 5 5600x which I bought about a week ago. So I am with the stock cooler and I will use it for only playing games. I was wondering if it is necessary to buy an aftermarket cooler? I don't think I will overclock it because it wont give me much gains. So should I buy an...

The fans are fully working with rgb but the middle unit of the aio is not lighting up. Anything helps

Ive just build a new pc and I planned to make it with the 360 AIO in the top-mounted and realised it won't fit so now the only option is tubes up front mounted. I have the tubes on the aio at the bottom and was wondering if this is the reason I'm get around 57-60 degrees idle. GPU is fine at...

System: CPU Type HexaCore Intel Core i7-8700K, 4800 MHz (48 x 100) Motherboard Name Gigabyte Z370 Aorus Ultra Gaming Motherboard Chipset Intel Kaby Point Z370, Intel Coffee...

Greetings and Salutations, I am getting an I9-10850K and I know they are hot as heck heat beasts. I am using the MSI MPG Gungnir 110M case and would prefer an AIO cooler for the CPU to limit the amount of case heat due to the rtx 3080 I managed to snag as well. I don't plan to overclock...

Recently put together my first build for Christmas, and I’m using an MSI Mag Coreliquid 240mm AIO to cool my CPU, and I’m using an Asus Prime Z-390a motherboard, and I cant get the RGB on the head of the cold plate or the RGB in the fans to work, I also cant get the fans running period. I have 3...

My coolermaster master liquid ml240 v2s block will not screw down Us my the included screws to the standoffs that were also provided. The screws will barely go in on one side and the other ones can't get close enough to the standoffs under the bracket to screw on. I push very hard on it and it...

Hi! I'm planning to buy the Lancool II mesh performance case and I'm trying to find the best fan setup for this one. So I was thinking of two options : 1) Front : Two 140mm fans as intake (stock) Top : AIO 240mm as exhaust Rear : One 120mm fan as exhaust (stock) Top of PSU Shroud : One 120mm...

Hey all, I've seen similar questions asked on here and I got my hopes up thinking I'd found the answer but it did not work for me. Let me try to outline what's happening and what I'm using. Case is Corsair Obsidian 500D and it comes with Commander Pro as well as that little RGB Hub Motherboard...

Hello. Just a quick question about my top mounted aio. I was wondering if my tubes are too bent and if i should turn the pump so the tubes from pump head are pointing down. Or if everything is fine like they are now. hope this image link works: View: https://imgur.com/a/5YM3c4e