airflow

I use the coolermaster k380 cabinet, which has an inbuilt fan in the front. I have bought three extra fans, but i am still confused on how i should set it up, please help me! There is space for one fan above, one in the back, one on the side panel and one on the bottom! With a preinstalled fan...

Hi, I recently did a new build and its the first I've done in approx 10 years. specs are as follows: Ryzen 9 3900x CPU msi x470 gaming plus mobo Cooler Master Hyper 212 RGB - extra fan added to heat sync Fractal Design Meshify ATX High Air Flow Case Rtx 2070 Super GPU I have 2 intake fans in...

Anyone has guide for this chassis airflow?

So I am planning on putting a 1650 super gigabyte version in my old HP Envy 700 (with an i5-4440 processor), but the HP envy's original case has almost no airflow just one 120mm exhaust fan that seems to work fairly well as my CPU never goes above 60 degrees Celcius even under intense loads...

Hello! I'm having a hard time deciding on the airflow of the my case. So, first of all my case (TD 500 MESH) can handle 360mm top and front Radiator. Im torn between putting my radiator on top or at the front. My questions are if I placed them at the top with an exhaust, wont the fan only be...

Does the Deepcool Macube 310P BK have good airflow. I'm getting 4 fans to install in the case. Not sure if you need to know but just in case i'll link a pcpartpicker list. https://ca.pcpartpicker.com/list/Zrmbmg

I've finally decided to fix my case's airflow but unsure how to proceed with it. Going for a very budget fan setup with Arctic F12s. My question is if there is any advantage to using the P12 which is optimized for static pressure or just sticking with the plain old airflow optimized. I checked...

I recently built my new PC, and I used the KOLINK Citadel Micro ATX case. IT came with two case fans, and one magnetic dust filter, that goes on top. I've configured one of my fans to take air in from the rear of the case, where the IO is, and one to push air out from the top, directly above my...

I have in my Corsair 400 case a H100i Radiator with 2 noctua 120m fans pulling air , 2 noctua 120m fans on the top, and one 120m noctua fan on the back. The radiator is placed in the front of the case and the 2 fans are pulling air thru the RAD into the case, the two top fans are pulling air...

I recently built a new system of config: Ryzen 3700x MSI x570 gaming plus MSI Ventus OC GTX 1660 in top pci slot Gskill Ripjaws 16GB @ 3600 Mhz CASE Deepcool Matrexx 50 ATX 2x NVME + 2x 3.5 HDD + 1x 2.5 HDD 3x 120 mm fan @ 2000RPM + 1x 120mm fan @ 4000RPM + 1x 90mm fan @ 4000RPM 3 fans with...

Hi, I recently got a new PC that I assembled on my own. My RTX 2070S is going at about 70-72C in gaming at while the fans appear in MSI afterburner to be used at about 60% capacity. On internet I found people get about 60-65 degrees with it. Is it ok? Should I set a custom fan control or is my...

Hello, Planning a new build with an i9 9900k & RTX 2080 Ti, so of course I'm going to need some serious cooling. For the i9, I'm planning to go with the Corsair H150i. I just need suggestions on what case is ideal for airflow with that mounted at the front. Also, I'm gonna need some good...

So tomorrow im changing my room (personal decision) so this is the wall where im going to place my gaming setup, i would like to know where´s the best place to put my pc ( it has tempered glass in the right so internal components are visible and i want a nice look of it and a good airflow ) i...

Hi. I have a Antec NX200 Mid Tower case MSI B450 Tomahawk Max motherboard, Ryzen 5 3600 (stock fan) Gigabyte RX 5700 XT OC Ed. 8GB. Basically, the temps on my motherboard and GPU are cool, with motherboard being at around 45-55 max under load, and GPU maxing at 75-80C. But, since I have the...

Hello everyone!Right now I have a zalman z11 case. https://www.google.com/search?q=zalman+z11+high+performance&sxsrf=ALeKk03C3vbWgFcemnOYT3YAlbz_Bkf-lw:1592685651239&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjxheyzoJHqAhUdi8MKHWWqBL0Q_AUoAXoECAwQAw&biw=1422&bih=678#imgrc=lwZhxZb00HKxRM I didn't...

hello there. i am currently using a corsair 100r case. i would like to know if there are any better atx cases than this one? my case sits in an enclosure with a height of 17.5 inches and a width of around 10 inches. i would very much appreciate a good airflow case. thanks in advance!

hey guys only case is left to build my first pc wich case has good airflow for heavy gaming please recommend me one from this website https://fractal-shop.com/categorie-produit/composants-pc/boitier/

I have a case with only 2 places for fans, a 80mm on the back and a 120mm on the side. What air flow should I do?

Greetings, my specs are: Ryzen 2600 b450-m aorus gtx 1660 16gb vengence ram 600w psu case MS BLACK WIDOW (https://ms-start.com/en/ms-black-widow-midi-tower-ultra-silent-pro-gaming-case.aspx ) here is a link since its not a popular case. have a 256 gb ssd, and 1 tb hdd for games. So i have...

Hey there everyone, So I recently built my first rig by myself and these are the specs of it: Motherboard: Gigabyte X570 Aorus Elite CPU: AMD Ryzen 7 3700X 8-Core (3.6GHz-4.4GHz) 36MB AM4 (includes stock Wraith Prism stock CPU cooler) GPU: MSI GeForce® RTX 2070 SUPER GAMING X TRIO 8G...

Hi all, Which case performs better in airflow, and which has newer features?

Heyo! So I just installed this usb controller on my mobo (it sadly only fits in this slot, not the lower one). And I was wondering if this controller blocks my right GPU fan? Thanks in advance! GPU: RTX 2060 SUPER

My Corsair front Af140 fans are broken. They are making loud noises and don't run well anymore. I want to replace them but my knowledge of fans isn't that great. My question is if anyone can help me with some sugestions to replace the broken fans. I've seen some noctua fans etc.. but there are...

So i have recently Build a new PC, completely new, no preused parts aside from storage drives. The PC has These Parts: CPU: AMD RYZEN 7 3700x GPU: MSI RTX 2080 Super Gaming X Trio RAM: G. Skill Trident Z Neo 2x16GB Motherboard: MSI MPG X570 Gaming Edge Wifi PSU: be quiet! System Power 9 CM 600W...

Hi all, Currently, I have a B450M Steel Legend motherboard from Asrock and the Corsair 280x case. I plan on getting an aio and some fans, what fan and aio configuration/placement would be optimal for this situation?

Hi guys ! As the title says I need help with airflow. The situation is presented in the following link https://ibb.co/rv0rNb5. 2 fans at the front are intake and 1 is exhaust, top 2 fans arent currently on because I think they arent needed as much. I marked with colors wich area feels hot the...

Hey, I’ve recently noticed my gpu gets very hot(80-90 celsius). And when I take the glass panel off it helps a bit. But that shouldn’t be needed right? I was wondering how I could improve the airflow(picture linked) View: https://m.imgur.com/6Zm0bG3

Hello, recently i have found out that my parts are overheating, becuase of bad airflow. Do you have any recommendations for good airflow case for less that 40$? I will buy a fan with the case too. I am thinking about Noctua NF12x25 PWM.

Hi, between these cases wich one do you think have the best temperatures with air cooling (not watercooling of any kind) for GPU and CPU with maybe a small overclock. Mostly interested in GPU cooling since you can get a cheap OEM cooler like the hyper evo 212 for cpu and that will keep it cool...

Here's the list of the components I'm planning to get: https://pcpartpicker.com/list/x9kH8M Considering I'll be overclocking my CPU, are the 2 front 200 mm stock coolers and the single 120 mm rear exhaust good enough? If not then please suggest an ideal fan setup for optimum airflow/ cooling...

So I recently build a pc with a R5 2600x and a GTX 1660s and the only thing left is the case. The thing is that in my country (Colombia) is quite hard to find something good with nice airflow at a reasonable price and I ended up with two options: Xtech Environ (Xt-gmr2) Xtech Delirium (XT-GMR1)...

I am a very low budget in terms of cases so i really need a cheap case with good airflow. At leasy it shouldn't decrease cpu or gpu performance. Please help me...

Hey, so i basically got this pc case, its the MA-01 Micro. Sadly i have no idea how to place the side fan. I have a 120mm front fan as an intake and a 80mm fan as an exhaust. Should i place the 120mm side fan as an intake or exhaust? Thank you.

Hello there, My current project is working on my 6 year old HP Pavilion which I'm trying to turn into a sleeper gaming machine within the original case. I'd like to make some mods to it to improve airflow. Airflow isn't really a huge issue right now as I rarely see temperatures get...

I have a haf 912 plus computer case and im using a rog strix 2080 ti and 9900ks cooler by dark rock 4 pro, both overclocked. I purchased three corsair LL120 fans that i plan to install in my case. Im wondering where i should put them though, here is the recommended airflow for my case from...

Hello everyone. So I´m currently cooling my stock running 9900k with a Dark rock 4 pro and I´m getting weird temps. Idle: ~40°C Cinebench R20: ~87°C XTU Stress test 5min: ~ 70°C I´ve seen people online with this setup getting <30°C Idle and <65°C Load on this. My case is the Lian Li PC011. I...

So I've recently started to be concerned about temperatures on my PC. I'm the type that can't stop being worried about stuff. I have a couple of questions about cooling. I have a RTX 2080ti Msi ventus, and I'm hitting 77-80c when they are maxed out. Are these ok temps? I'm also wondering if...

Hello, I'm planning to upgrade my case to an Aerocool Cylon Black. Since this particular case doesn't have an opening on the front for air to come in, I need help on how to install the fans to get the best airflow (I will be using the pre-installed fan and 2 extra).

HI guys, I was planning for my Christmas build to be running a watercooled Ryzen 9 3900x + RTX 2080 Super/TI. Is there a good case out there that has good airflow, looks nice and is cheap? Preferably less than $150 AUD

Good morning guys, I hope you help me with the following. I have a blower type graphic card and I want to know what type of airflow I should use. I attached a picture of the case with everything inside. The case has 3 front, 1 rear and 2 up fans