no video

I started a build and can't figure out what's wrong with it. Everything that's supposed to be plugged in is, and when I flip the switch on the PSU the board flashes then nothing I press the power button the graphics card flashes then nothing no debug lights stay on the CPU flashes once really...

This is my setup: Motherboard: ASRock B450M/ac Graphics card: Radeon RX 580 8GB GDDR5 CPU: AMD Ryzen 5 2600 Power Supply: Corsair CX 550 SSD: Sabrent Rocket NVMe M.2 2280 PCIe SSD RAM: Patriot Viper 16GB 2x8GB kit DDR4 My issue is that my PC will turn on, the light will turn on and the fans...

My Benq Sw240 is being picked up by the pc but there is no video or OSD only backlight. Any help would be appreciated.

Ok, so I have just got myself an amd rx 580 8gb msi armor to replace my gtx 1060 3gb. Since the gpu was too big to fit in the case I had to get a new one. After I had got the case I whipped over all the parts from the small case to the larger one, plugged in the cables, and when I try to start...

I just reinstalled Windows 10 on my M.2 NVMe SSD using a Windows 10 1809 ISO. I am able to make it through the install process perfectly but as soon as it comes to loading into Windows, the monitor loses signal. I've done multiple clean installations using 1809 and 1909 ISOs, reset BIOS, CSM on...

Hi, Bought the following components: AMD Ryzen 5 2600 Gigabyte GA-B450M Gaming Motherboard Sapphire Pulse Radeon RX 570, 8GB G.Skill Ripjaws V F4-3000C15D-16GVRB 16GB (2x8GB) 3000MHz DDR4 Corsair CX650M 650W Bronze Power Supply -Fans would spin etc but no video output from gfx card on either...

I attempted upgrading my pc the other day from an fx-8370 with an msi 970 and 16gb of HyperX ram to a Ryzen 5 3600 on an x570 aorus elite with 2x8gb of g.skill ripjaw 3600mhz ram. The powercolor red devil 5700xt has stayed the same as well as my 750 watt psu. The problem I’m occurring is that...

I recently built a new gaming pc and when I am playing a video game my display randomly turns off (randomly not always), my monitor is still on, that is not the issue. I can see that my motherboard is still on but my keyboard and mouse suddenly stop working aswell. Everything else in the case is...

So about a month ago I finally built a new PC after about 5+ years on my last build. Everything went well and I had been using it happily for about a month (literally will be a month tomorrow). That is until last night, when I rebooted the PC and upon booting the monitor just sat there saying...

Hi, I've got an old Packard Bell Multimedia PC I've been trying to get working again for old time's sake. After replacing all of the capacitors for fresh ones, sourcing some parts and thoroughly cleaning the board and connectors, I was just about to fire this thing up. However, on a first...

Pc been working ok until this morning when i tried to start it and i got the next message on the monitor: "No video input, Enter sleep mode", i plugged the cable in the integrated motherboard gpu and it works. I looked around in the bios and it was set for dedicated GPU so everything ok, i even...

So I recently order a new PC. Parts are a B450 Tomahawk motherboard, AMD Ryzen 5 2600 CPU, Radeon RX580 graphics card, CX550M Corsair PSU, Corsair 2x8GB Vengeance LPX RAM, 970 EVO NVMe M.2 500GB SSD, and a 2TB HHD. Everything is put together, everything is seated correctly, plugged in, cords...

my parts: intel i5 6600k, corsair cx750m, rx580 gpu, asrock z170a-x1/3.1 after having run standard troubleshooting procedures, i have narrowed it down to cmos issues(?). whenever i move my ram between slots, or remove my graphics card, there is no change or difference in behavior. with my gpu...

well i buyed my new pc and i dont have video signal :c directly from hdmi mobo port, all is turned on normally but no video signal..... what is happening? the seller say they updated correctly the mobo for support my cpu but nothing happens PC: MOBO: Gigabyte B450M DS3H updated CPU: Ryzen 5...

Hi everyone, thanks in advance for taking the time to help me out with this issue! I'm sure ill get a lot of comments saying that my hardware its old and outdated... blah blah blah but please try to understand that its not about the hardware, but a fulfillment of my childhood.. haha THIS IS...

Recently had a lot of troubles with my computer crashing. Thought it might be RAM related or due to my old hard disk. Today I installed a new ssd. When installing I had to remove my video card to access the data port underneath. I noticed the card was really dusty so I sprayed it with compressed...

Specs: CPU: AMD Ryzen 5 1600x 3.6GHz (Not Overclocked) CPU Cooler: Cooler Master Hyper T2 MOBO: MSI Tomahawk b350 Ram: (x2) Corsair Vengeance LPX 8gb DDR4 - 2133 HDD1: Samsung 850 EVO 250gb Sata SSD HDD2: WB Blue 1tb GPU...

Yikes! I bent some pins in the CPU socket, and I put a used core (i7-3770) in the LGA 1155 Socket, Dell Optiplex 790. There was no video output, but the signal was fine. I put in the old core, and there was still no video. I will supply some pictures below. Image 1 Image 2 Could it really be...

So I just downloaded CPU-Z because I wanted to know if the RAM I have (8gb DDR3 HyperX Fury) is 1866MHz or 2133MHZ but I can't find that. It says that my NB Frequency is ~2700MHz , my DRAM Frequency is 933.6MHZ and my FSB:DRAM is 1:14.

I have a msi b360m bazooka and updated it 2 days ago and I noticed so far once a day I get these 2 errors popping up at the same time. Event ID 4 AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0x75), which lies in the 0x74 - 0x76 protected address range. This could lead...

Please help !! I made a password for my external hard drive (WD) by WD security app a month ago with auto unlock for my laptop so I don't have to write the password everytime I use it The thing is I had to reset windows 10 due to some issues and when I try to open the external drive it asks for...

Problem: My cpu temperature goes beyond 95% while rendering. the score is just 1030cb , even lower than the official i7 3930k Link to view my computer spec: https://ibb.co/cSiTXz Link to view my cinebench score: https://ibb.co/bPaWkK If you don't want to view the link, below is a...

im looking to get a new from pc specialist but i want to just use the same hard drive im using at the moment because is has all my thing and most of all my OS. Just wanting to know if its as easy of plug in and go cause its set up or if its really annoying. Side note pc specialist make you get...

Hi! I have 2 connections from the video card: one VGA to the computer monitor and the other to the TV, HDMI.The monitor looks just fine, but when I want to watch a movie I change the output from the display settings. The problem is that the movies are too dark; I barely can see what's happening...

I have my laptop Acer V3-574G-533U running Windows 10 with Intel Core i5-5200U, HD Graphics 5500 and NVidia GeForce 940M. The thing is a week ago I started getting some screen distortion while playing games. Than I realized my laptop used Intel HD Graphics for all the gaming tasks (which wasn't...

I have just Installed my brand new EVGA SSC GTX 1050 Ti into my computer I just built. I am still new to PCs, so I could be making an obvious mistake. The fans on the card are spinning and the HDMI cable running from the card to the monitor is working. Do I need to change something in the BIOS?

Will the following hardware support four GTX 1080 ti GPUs without bottlenecking? MOBO: EVGA X99 Classified CPU: Intel Core i7-6850K  RAM: Corsair Vengeance® LPX 32GB (2x16GB) DDR4 DRAM 3000MHz C15 Memory ((CMK32GX4M2B3000C15R) My purpose it to do GPU 3D rendering using blender. Further, is it...

hi, my name is gaurav and i am student from india. i want to build a gaming pc. i have money but not the permission to spend it on a gaming pc, so i want a good configuration uder $400-450 or simply 35k INR. i don't crave for solid 60 FPS in every title. i can drop the settings but i can't...

I haven't overclocked a GPU in a long while, and I'm completely new to Pascal, so please correct me if I'm wrong but I was watching a simple overclocking guide to overclock pascal based GPU's and one of the points made was that the card should not be hitting the power limit at stock...

Hi guys First of all my pc spec: Asus asus m5a97 r2.0, fx8300, Sapphire r9 280 trixx, hyper fury x 8gb 1600mhz single channel. So i overclocked the fx8300 @4.2ghz and the cpu vcore is set @1.325v everyting else is auto.. I disabled turbo mode and the power saving options expect HPC is enabled...

Hey there I have Startech 4 ports card that supposed to be connected to PCI Express x2. Asus support says- Asus motherboard 270Z Hero has only PCIE X16, X8 and X 1 and they don't know where the X2 goes. I thought- it should fit in to any slot. Please, advise. Thank you.

I followed everything that this guide provided but the system wont save my new oc speeds. Any help would be appreciated. https://www.youtube.com/watch?v=7cOBaW_9U3A I5 4690k 3.5ghz Asrock z97 extreme4 16GB RAM Asus Strix 970

Does this card works with windows 7? After migrating to win 7 from win 10, cannot find drivers that work for me. Had no problems on win 10, no hardware changes all same parts. Same MSI z170m motherboard, with newest bios. Tried latest driver version from nvidia and older ones, including...

I just got a new laptop of Craigslist and it didn't come with a disk drive. How do I get the drivers and software to run the pic? Can I got to the manufacturers website and download them from there? I already have a copy of windows 8.1 I just need all of the other drivers.

Is there a way to recover the windows product key if the computer that had the installation of windows has been completely reset? The hard drive does not have the OS installed and it is like a new drive. I had note with the product key since I was going to reinstall windows on the computer in...

I run a Skylake build with the 6600k and 2 msi gtx 970s in sli, Im currently using a Dell 2408WFP( bought in 2008) which i love, but has had virtical line issues for a while now. I play games like Total war / Company of heroes, to darksouls and gta V, and many many more fps/ and faster...

I'm deciding what monitor to get for Xmas(I know it's early) and I decided on the pg278q as it fits in my £550 budget.

So I know this is a cheap set up but please bear with me. CPU- http://www.newegg.com/Product/Product.aspx?Item=9SIA1UH... Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813128873&cm_re=motherboard-_-13-128-873-_-Product Power-...

How much fps will the laptop lenovo g50-80 will give as counterstrike online requires gud fps rate????is it good for the game

I have the Corsair LP memory model CML16GX3M2A1600C11, however that memory is very hard to find. I commonly see the same thing, except with C10 at the end instead of C11. I haven't checked the timings, but if it is the same frequency and timings and they're both LP, will it be OK to mix them?