ram boot

Hey guys! I bought a new pair of memory modules with a frequency of 3200MHz, totaling 32GB. My motherboard and processor support the specified quantity and frequency. However, I am unable to start the PC with these modules, whether individually or together. The only way I can start the computer...

Hello all. I have a high end pc that I've had for just about a year now. Ever since it was first built, it has had issues with booting, issues with freeze framing/stuttering and issues with games crashing. I'll list my specs here and then afterwards go into a more detailed breakdown of the...

Lately my pc has been booting up slowly. I noticed that it takes the 2 boots for my computer to boot up. It shows me the bios flash screen twice before coming to windows. So i completely reset my pc with fresh windows thinking it was some windows issue . The issue still persisted. Later i...

Had 2x4 2400 mhz rams and my mobo supports max 2400 mhz, wanted to upgrade rams to 16gigs, purchased crucial 3200 mhz CL22 dual channel kit thinking it would downclock and work at 2400 mhz like so many people said to me, but after installing new rams my laptop wont boot up, i can see rams in...

Hello, i had 8x2 3200 mhz ram in my pc and i bought the same one again, after putting everything in it booted up and i got a blue screen. I went and restarted it and i got an infinite windows loading screen. I turned off the pc plugged everything out, pressed the power button to clear the...

This is a bit of a story so please bear with me. I had 2 16gb ram sticks (different brands and speeds) but which was working fine together. Then i borrowed one to my cousin when his died. He has replaced his and now i'm back with the 2 sticks. So, the ram is in alternate slots (both channel 1...

Hey everyone, So I built my new PC a couple weeks ago and I've had this issue happen twice; I press the power button on the case and it lights up and my RAM RGB lights up, but I get nothing else, no power supply click or any other RGB lights. Then I power it off by holding case power button...

So I want to let out all the specifics of my situation, My specs: CPU: Ryzen 5 5500 GPU: EVGA Rtx 2060 KO PSU: EVGA 600W RAM: 8x2 Corsair (single channel, one in A1 and the other in B1) Motherboard: ASUS TUF A520M Plus Wifi As stated before, my ram is on A1 and B1 slots, this is because...

I’ve had my ryzen 7 5800x for a little over a year now and I’ve never had any problems with it, but I bought two more sticks of Corsair RGB 16GB 3200mhz RAM on top of the 16 gb I already had (same spec as the ones I bought) but when I put them in their slots the computer wouldn’t boot, I found...

I am new to this so please excuse my lack of the proper vocabulary. I bought a new RAM stick to upgrade my laptop. It only has one slot. The laptop is an an Acer A315-58. It is my first laptop, before this I only ever had desktop PCs. When I had a PC, all I had to do to upgrade the RAM was put...

Today I had received new ram. I had added the new ram to the spare two slots not realising that isn’t a good idea (old and new ram). Now the pc wouldn’t boot. I tried to reinstall the old RAM and it still won’t work. I had removed the CMOS battery and put it back and that also didn’t help. What...

Hey all, I've had my computer for about 3 years now and I recently got error code 27 on my MOBO when trying to boot. Computer will start, fans blaring, but the screen stays black and code 27 registers on the MOBO. I read it could be a RAM issue so I removed one stick (from A2) and it booted up...

Hi. So basically I have an Acer Nitro 5 with 8GB ram. Laptop model is N20C1. I have purchased a set of ram. ( Corsair VENGEANCE SODIMM 32GB (2 x 16GB) DDR4 3200 MHz ). Which as far as I’m aware is compatible. However I’m looking to see if anyone else knows otherwise. I have fitted it to my...

Hello, Just bought 2 more ram sticks Corsair Vengeance RGB PRO 16 GB (2 x 8 GB) DDR4 3200 MHz so now I have 32GBs of ram, my problem is that they don't work at 3200Mhz, with the D.O.C.P on that sets the speed at 3200Mhz I have to change it manually to 2933 to make them work. My question is...

Hi, when I try to enable XMP1 from my BIOS, the computer boots up... after 5-10-15-20 minutes, I either get a freeze or blue screen of death, then my PC restarts 3 times (I think it's three times) then I get a black screen, I shut down my PC from the power button, they I start it again, all...

Hi guys please please help ive just recently upgraded my ram from 2x8 16 2300 to 2x16 3200 they are both ddr4 so i pulled out all the old ones, and replaced the new RAM sticks in the same slots therefore activating dual channels however my computer did not recognise these new RAM sticks instead...

Hi, I have a MSI B450 TOMAHAWK MAX II AM4 ATX Motherboard with 2x8GB of ram, recently I got two new sticks of 8GB of ram, my old ram sticks run at 3200MHz GSkill ripjaws the new ones are the same brand 2x8GB but 3600MHz. After I install the new ones the PC won't POST the CPU indicator led lights...

Hello, this is my first post so I hope I got the category right, it made sense to me at least. So I have an Aorus b450 Pro and I used to have 16 gb ram installed (2 x 8gb) and everything worked just fine. I needed an upgrade so I bought another 2 x 8 Gb and tried to install them. I installed...

Hey everyone, i have a ROG Strix B450-F motherboard which i’ve owned for 3 years now and I haven’t had any issues with it until now. I’m trying to upgrade RAM to 32gb. I had 16gb of T force rgb ram since i built the PC and recently on market place i found another 16gb kit of T force rgb ram. The...

(Can someone PLEASE let me know if this is a compatibility issue or something els I need to know wether to order new ram) I recently just tried to swap out my old ram for new ripjaw 16gb ddr4-2666 f4-2666c15d-32gbr into my h310cm-hdv and after wards upon turning it on it was getting no hdmi...

I recently upgraded to 4x8 of Corsair Vengeance RBG Pro rated for 3600mhz on my system. When first installed and turned to its rated speed of 3600mhz my system wouldn't boot. I fixed that problem by updating my motherboards BIOS to the newest version. The computer works as it normally should...

I recently upgrade my GPU to 3070 at first i want to try this on my old pc for fun MotherBoard= Asus H61 Plus [ 4 pin ATX CPU connector] CPU= i3 3220 RAM =12GB DDR3 PSU= GigaByte 500watts it used to be run with GTX960 properly i check Needed Power for this new 3070 on [...

Hello, I have a Gigabyte GA-Z170X-Gaming 3 motherboard, and I have always had the 2 x DDR4 2133 8GB rams installed in the red slots DDR4-1 and DDR4-2. Just for testing purpose, I tried to move the 2 rams to the black slots DDR4-3 and DDR4-4, but the computer starts and stop working for few...

Hello, I having an issue with my new set of RAM that my gf bought for me on Christmas. Its not running at it's 3200mhz, I turned on XMP and when I save and restart I get the memory beep code then it sets back to 2133mhz. My pervious set, Hyper X Fury, worked just fine even overclocked to 3200...

Hello! I've very recently bought upgrade parts to my computer! I bought a new motherboard, AMD CPU, 2 sticks of DDR5 ram and a noctua cooler. Used to have an old INTEL system with: CPU - i7-4790 MB - MSI H97M RAM - 4 sticks with 4gb PSU - Cooler Master B500 500W ___ NEW AMD SYSTEM: Motherboard...

I had just installed a new m.2 and swapped out my ram for a 32gb kit and when turning the PC back on I got the dreaded power cycle. I cleared the cmos and that didn’t seem to effect the issue. I also took out the m.2 and replaced my old ram and it still power cycled (turns on for 15 seconds then...

Hey guys, so i just got some 32gb 3600 ram, my cpu only allows me to use 3200 but xmp it forceing me on 3600 when i turn auto on. So this lets me in but just crashes my games when i try to play, can i just switch the mulit speed to 3200 or do i have do a lot more? really new to this kind of stuff.

https://drive.google.com/file/d/1f3B20-x8m4Sl8Qh9Y9RIn-ZyafvBV3cj/view?usp=share_link - Link that kind of shows the issue. So it takes long to boot my PC and at the boot lights it is stuck on the dram one for a while, but there are white lights on top of the gpu plugs which I believe mean it is...

Hello all, I frequent this website, and often find answers. But my current issue is odd enough, that I have created an account to ponder my first question with you all! So my pc's RAM has been bogged down recently, when playing games. Always maxed out. So I decided to upgrade from 16 (8x2) gb...

I am testing out a computer I was hoping to have just finished when I found that it will simply not POST when any more than 1 RAM slot is filled. I did the usual RAM diagnostics, and found from Googling that this exact issue actually may be caused by the CPU/mobo socketing. Apparently...

System: Ryzen 7 5800x Rog Strix x570-i gaming Old kit: Corsair RGB Pro 3200 cl16 New kit: G.skill TridentZ Neo 3800 cl14 Hello there, I recently purchased a new kit of RAM, and have been having some odd issues. Before installing the new kit, everything was running fine and was completely...

Hello Just finished my first build and and just remembered that I need to enable XMP. But from two presented profiles it won't boot. Specs: CPU: i5-12600k MB: GYGABYTE z690 AORUS ELITE DDR4 RAM: Kingston Fury DDR4-4800 2x8GB

The system : Proc : intel i9 12900k Mobo : MSI Z690 EDGE WIFI DDR4 PSU : CORSAIR RM1000X RAM : 16x4GB TRIDENT Z ROYAL 4000mhz (2 kits) [F4-4000C19-16GTRS] GPU : RTX 3090 ASUS STRIX OC 24GB To start things off, i found this issue because i was checking through task manager and found out...

I was just browsing and suddenly displayed went out, but the keyboard and fans still on. I restarted my PC and still no display and the first thing I assume is the RAM (I have 2 slots only). So, I did some reseats multiple times until I decided to leave 1 RAM stick only on the first slot and...

I've tried to reseat the ram, reset/clear my cmos use one stick, use one stick in a different slot and even trying to use my old ram to see if the new ram was faulty and I still get a black screen, nothings working. I tried checking my gpu, cpu and everything else and all cords are properly...

I removed my cpu cooler and cpu, cleaned up the dust and the dried of paste with wd40 (didn't have alcohol swabs) and got them both back with thermal paste. When I turn on the pc, red light flashes and then dram led goes yellow. Tried sticking in the ram sticks in different slots and nothing...

Hey guys. Sorry for the long post, I tried to be as detailed as possible. I have a TL;DR at the end. Any help would be appreciated and hopefully people who've struggled with this this share their experience. Issue: I have a rather strange problem with my build from 2014/2015, namely it no...

Specs Ryzen 5600x MSI x570 edge wifi 8gb (single) 2400mhz wanting to upgrade to 16gb 3200mhz (2 dims) gtx 1060 6gb 980 Samsung evo m.2 Cx550m PsU When i install the new ram all the fans get really loud but it does not post or anything, there is a motherboard light that says CPU? When I take out...

Hi I recently build a pc using older components that I have for NAS purpose, and whenever I insert any ram stick on A1 or A2 slot (with or without B1 & B2 inserted) the PC wont boot into BIOS, either gets error code 49 then 01 and 03, or stuck on code CC. I tried clear CMOS, testing every single...

Hello Guys, how are you doing? I´ve recently bought a new kit to upgrade my RAM to 32GB, but i'm having a problem. All 4 sticks and mobo slots are working fine, but i'm not being able to boot the PC with all 4 being used at the same time. (Tried all combinations possible to make sure) If I...