ram boot

Hello guys, I recently upgraded my PC to 32 GB RAM, I had 2x8 TridentZ 3600 MHz and I sell it and bought a 4x8 Corsair vengeance pro RGB and since I installed corsair ram when I turn off my pc for an hour or more, when I try to turn it on the yellow light stays on and nothing showing on the...

As the title suggests, I built my PC and I can't set full frequency to G.SKILL RIPJAWS V 3600MHz 16GB. A-XMP just sets the memory to 2133 Mhz which is unacceptable for gaming on integrated graphics. When I tried to manually clock the RAM the system doesn't boot and I need to reset the CMOS...

Hello, recently I bought Ryzen 9 5950x for my workstation that has 4 sticks of ram - 48gb (2x8+2x16) HyperX 3200mhz with xmp1 enabled, on MSI Tomahawk Max B450. Sometimes under load I had sudden black screen and CPU debug led. I knew that 5950x is too much for b450 and I thought that was the...

Hello, so I can't manage to boot my pc with XMP mode on, I looked at qvl list at gigabyte site and it has no support on Corsair RAM CMW16GX4M2D3600C18. So I'm now left with changing my ram? Or is it possible to do it other way? Please help me. My Specs: I7-10700K 2060 Super Gigabyte Z490 gaming...

Build new pc spec are 12400f Asus b660m plus d4 Tridentz F4-3200C16D-16GTZR nzxt h510 flow Pc runs perfectly fine while using everything auto in bios dram configuration but as soon as I set xmp 1/2 system doesn't start and bios gets reset tried 3600mhz tried 3200mhz with 1.4v same problem but...

Hey all. My PC was built from Ibuypower with professional wiring and safe packaging about almost 2 years ago now, it looks so clean. It’s been flawless with no issues whatsoever not 1, literally. Today I’VE caused the first issue. As I wanted to replace my old ram being the default: 16 GB [8 GB...

What the title says. Got a 32GB kit of 3600 speed but everytime I set the XMP profile, save, then boot it will restart 3 times then load normally but without the set speeds that I had set and is set at 2133. When I set it to auto it doesn't do the reboot three times thing. I for sure have the...

Hello, PC Specs: CPU:AMD Ryzen 5 1400 Quad-Core Processor 3.20 GHz GPU:Nvidia GeForce 1050ti Mobo: Msi a320m Gaming Pro. I bought a new ram 16 GB G.SKILL 3000mhz, my problem is when i try to boot with this ram on first slot is not booting but on second slot bios reading it...

Long-time lurker, first-time poster. Thanks for all the help and advice you guys have offered me over the years. I have a matched set (2x) of A-DATA 8GB 2400 RAM installed. Works fine. (AX4U2400WG16-BRZ) I went to replace them with Corsair 8GB 3600 RAM (2 matched sets (4x8GB)...

Hi all! I recently had to get a new motherboard and reused my previous parts. I noticed that the PC will only POST (might use this term wrongly, what I mean that everything lights up, fans are spinning, but I don't even get to the BIOS screen) if I have memories in channel A. I originally have...

PC SPECS : OS :Windows 10 CPU: Intel Core i3 9100F @ 3.60GHz RAM: 8.00GB Single-Channel @ 2400MHz MOTHERBOARD: ASUSTeK COMPUTER INC. PRIME H310M-E R2.0 Graphics Card : 4095MB NVIDIA GeForce GTX 1650 SUPER Storage: SDD and a HDD SDD (OS is installed here and halo infinite) ...

I recently bought new ram, but whenever I put it in I get a yellow light on my motherboard and the computer won’t boot. I have a B450F motherboard with a Ryzen 5 2600. I was running on some Corsair 2666mhz ram before and now I have upgraded to some Kingston Fury 3600mzh Cl17-21-21 memory which...

My z690 mobo advertises DDR4 speeds up to 5333mhz, my XMP profile to 3600mhz doesnt even boot Heres my specs: CPU: 12600k OC to 5ghz-P cores, 4ghz-E cores MOBO: Asus Prime D4 Z690-P RAM: 2x16gb Vengeance LPX 3600mhz 19-22-22-36 (advertised timings) CASE: Corsair 275R Airflow CPU Cooler: Arctic...

I had a problem that caused my ram to display only 8 gb on task manager but I have 16 gb. While I was trying to fix it I accidentally set my maximum ram from msconfig boot settings to zero. Then it immediately bluescreened and I can't boot windows. Is there a way to fix this from bios or am I...

I have a Ryzen 5 3600 cpu in a phantom gaming 4 x570. I didnt built it someone else did. For 2 years i used an 8 gb stick ddr4 with 2666 mhz but only registered 1333 mhz, dont know if its relevant. The 4 ram slots are parallel and are noted as A1, A2, B1, B2. The stick was on A1, i cant try the...

I've been using a single RAM Kingston Hyperx DD4 8Gb 2133MHz and decided to add a new one, exact same one but diferent model number, same speed and size. Old model number: HX421C14FB2/8 New one: HX421C14FB/8 I searched for a while and apparently the model ended 2/8 supports dual channel and the...

So recently my motherboard wouldn't go to the bios and restarted the bios by taking out the battery and putting it back in. After that my computer didn't boot up. I tried booting up with my old ram and it worked perfectly. Then when I put my recent ram in, it won't boot up. I have made sure they...

MOBO: Msi mpg z590 gaming force, CPU: i5-11600k, RAM: Kingston 2x16GB DDR4 3200MHz CL16. I didn't have any issues with RAM for a bit while installing drivers on new build, but after a restart, my pc would boot but nothing would happen on the screen. I'm able to boot into BIOS, but nothing...

Hello! So first, sorry if my english isn’t the best. I used 4x2 ddr3 rams, worked perfectly, and I bought 2x4. First it’s worked, and the system showed 12gb rams. I was AFK for 1-2 hours and my monitor goes to sleep in 15 minutes after no activity. I got back to my pc, I moved the mouse and...

Leme just post my rig first. Rig: Mobo gigabyte b450 gaming x Ryzen 5 2600 Gtx 1660 super 6GB Vram PSU Seasonic FOCUS GX-750 G+ 16 GB (8x2 and on proper slots) 3200mhz (had it OCd at 2933mhz, max for my cpu to handle) __ So i have my rig (except for psu ) for about a year and 4 months now, and...

Hi people, I have added an addition 32gb of ram to my existing rig. It has Gigabyte x399 Aorus pro mother board and 1TB crucial M2 nvme ssd. The moment I have added the RAM to motherboard. They system is not booting and the bios couldn't detect my SSD. Did my ssd got corrupt? Pls help!

I just recently bought 2 16 GB Ram sticks of the brand XPG (Adata) with 3000 Mhz and I can't get the DRAM to run at the full 3000 (2933 Mhz on my mobo); my computer won't POST after changing the dram to that; I've tried changing the voltage too but nothing, I need help I'm getting so frustrated...

I recently bought some new DDR3 RAM (2x4GB) to add on to my old system. It has been using 2x4GB Patriot 1866Mhz RAM since I originally bought it some time ago, so I wanted to add two more RAM modules to have a 4x4GB. When I tried to add the new RAM I just got, the PC wouldn’t post. It posts with...

Last week after shutting down the PC at night,when i tried to start it in the morning it didn't start,so i tried everything that came to mind,swapped the PSU( had one in a different pc) thinking that it might be faulty and it isn't sending power to the MOBO,that didn't work,so i sent the...

SPECS: CPU : i7 6700 CPU Fan Cooler : Arctic Freezer 34 eSports DUO PSU : EVGA 700W GD GOLD GPU : Gigabyte RX 590 (rev 2.0) - 8GB MOTHERBOARD : ASUS H110-M Plus RAM : 8 x 1 2133 Mhz CASE : Corsair Spec-Delta RGB —————————————————- My motherboard is kinda broken due to only accepting RAM from...

Hi all, Yesterday I had min PC BSOD, after which I was forced to power cycle it, to get it to shutdown, after reboot it sends no video output. I've concluded the issue is related to the RAM or motherboard, though the specific issue eludes me. If RAM stick 1 is put into socket B2, with all...

I build an pc. And I have big issues to install windows 10 and its BSODS. Here the specs: - Asus Crosshair Formula VIII -AMD Ryzen 9 5900X -Corsair Vengeance RGB PRO 4 x 8GB, DDR4-3600, DIMM 288 pin CMW32GX4M4D3600C18 -PSU LC Power 1200 W -MSI Mech2x Radeon RX 6700XT Generally I have the...

Hi, So I have been having this problem for some time now, but now it's getting more frustrating and I do have the budget to have it replaced. Scenario: Sometimes, I am not getting Display when I turn on my PC. The basic fix is actually the RAM. I just have to reseat it. But the problem is...

I bought a new 8Gb stick of RAM for my PC and it's pretty weird how the whole 16Gb is usable when i open BIOS when starting my computer and change the memory Try it! mode and exit the BIOS. PC then fails to start for 3-5 times and then works fine and all of the RAM is usable. If i dont open BIOS...

Okay so I'm not sure if I'm posting this in the right topic/forum (I'm new to this). THIS WILL BE LONG BUT PLEASE READ AND HELP ME. I'M BEGGING!! Specs: Mobo - Asus B550-F Gaming (Non Wifi) CPU - Ryzen 7 3700x GPU - Asus ROG STRIX RTX 3060 RAM - Trident Z Neo 3600mhz cl-18 (2x16gb) SSD- 1 tb...

My pc specs: -i7-7700k @ stock -GTX 1070 -Asus ROG Maximus IX Hero -2x8 Corsar DDR4 @ 3000mhz RAM So basically the problem is that the system won't boot on dual channel and the DRAM indicator on the MOBO stays orange. The manual says the optimal dual channel place should be the A2 and B2...

My girlfriend is having RAM problems, her Corsair RGB Vengeance 16gb randomly stopped working without being touched, and I can only get it to boot with 1 stick. The motherboard is an ASUS Maximus Hero VIII. On boot, I get a bios error saying to change the SATA configuration to RAID mode. I...

I have an asus Z170 pro gaming, i7-7700k, 8gb x 2 crucial ballistic 2400 ddr4 and its been serving me well. Decided to update witg additional ram. Got 4gb x 2 of crucial ballistic 2400. I flashed the bios and inserted the new ram into a2 and b2 slots. Then it wouldn't post. I removed one stick...

Hello everyone, i was playing on my pc and suddenly it restarts but it gets stuck on the loading screen to windows, even when I try to launch automatic repairs, it just gets stuck loading. I tried then to change ram slots or even only one at a time, when I plug 2 at the same time an orange light...

Hi all, Installed 16gig of RAM instead of my 8gig's which were in the same slots (as per the mobo manual) Tried BOOT advanced options -> uncheck maximum memory Tried system properties -> advanced > performance > virtual memory > no paging file. You can find images of BIOS and Task manager...

Hey i just clean my pc but when i re-assemble it my pc cannot boot/post when i insert 4 sticks of RAM, the debug LED shows boot LED. Then i try with only 2 sticks then my pc boot just fine. I also cannot enter BIOS. What can i do now? specs: Ryzen 5 1600 MSI B350m Mortar Arctic T-Force 4x4gb...

I removed my gpu, and the screen didnt show video, so i did a Bios reset, And a ram reset because Bios didnt work. Now the pc only start for 10-20 seconds, and still no video ?

I have GA-H55M-USB3 mother board. Old ram is Samsung 2gb 1RX8 PC3-10600U which works fine. I have 2 new ram of same model when I install 1 new ram(SP 4gb DDR3-1333) pc continously reboots.(can't access bios). when I install 2 new rams in the dual channel manner (2 white slots as mentioned in the...

Hello my dear reader! I got a problem here! I need your help! Games do not use all the RAM they need. What to do? windows, bios, resource monitoring shows that all 16 GB op is available. PC configuration: rx 570 4gb ryzen 5 3500x kingston fury black 2x8 3200 mhz windows 10 x64 home b450 aorus...

i5 4670k h81m-p33 Mobo 500w coolermaster power supply 16gb Ram 1Tb black edition HDD I have drained my PC of all power including bios battery every time I tried different combos. My pc use to work on 2x4gb ram sticks perfectly fine, recently i have got 2x8gb sticks so i thought I'd try the...