timings

Forum discussion tagged with timings.
  1. jstella0102

    Question PC Blue screen after fresh install - Possible RAM issue ?

    Please bare with me so I can explain in some detail what the issue is and what I've tried so far... So I'm working on helping my friend fix his PC. It's only around 4/5 months old and for a while he's been having issues with it. Early on it was getting errors playing games like Tarkov. The...
  2. E

    [SOLVED] Ram timings

    Hi guys I have problem, i want to give my ram upgrade and add some. And here is a problem, they have the same voltage, size, latency but a little different timings(?) First one is adata z1 and have cl 16-18-18 And second is patriot viper steel cl 16-18-18-36 Will it cause any problems with...
  3. A

    [SOLVED] Should I upgrade my RAM?

    Hello, I'm thinking of upgrading my RAM on my PC. I currently have Corsair Vengeance LPX 32GB DDR4-3200MHz (CMK32GX4M2D3200C16) dual channel ( 2 x 16gb) and I want to upgrade to 2x16gb 4000+mhz or 4x8gb 4000mhz+, I was thinking to this G.Skill Trident Z RGB 32GB DDR4-4000MHz (F4-4000C18Q-32GTZR)...
  4. B

    Question Trident Z neo running no where near rated speeds

    Kit rated at 3600mhz any attempt to run at a decent speed (3000, 3200, 3400, 3600) has failed. I dont know anything about voltage or timings anyone got any help? motherboard: b450f Ram: trident z neo 3600 Psu: asus rog strix 750 watt Gpu: asus rog strix rtx 2070 Cpu: ryzen 7 2700x
  5. HelloThere2424

    Question New Ram Bluescreening

    I've installed new ram (Link here if it will let me post it. https://www.amazon.com/G-Skill-2400MH4z-PC4-19200-Channel-Memory/dp/B074SYMV6R/ref=sr_1_2?dchild=1&keywords=DDR4+2400&qid=1589129228&s=pc&sr=1-2 And after installing my PC would work fine for a week or two, And then it started to blue...
  6. MxzsyXII

    [SOLVED] Will tuning my RAM from CL16 to CL14 make a difference?

    DRAM Calculator Result I have Corsair Vengeance RGB Pro 3200MHz CL16 DDR4 ( CMW16GX4M2C3200C16). I have been very bored during this lockdown so I thought I can tune my pc a little and get the most for my money. I used thaiphoon burner to check the ram die, and it says its samsung B die, but im...
  7. willyburns

    [SOLVED] Memory overclock not working? Problem with XMP.

    Yo, I'm having a problem getting the rated 3200MHz out of my 'Corsair Vengeance RGB (4x32GB)' on a new BIOS revision where previously everything was fine. I have an ASUS ROG Rampage VI Extreme and XMP was working fine with BIOS 2002; however, after updating to 3006, I cannot get my RAM to boot...
  8. extreme_noob

    [SOLVED] First time ram OC

    I have a Ryzen 7 3700X on X570 and 2x8GB DDR4 3200 16-18-18-38 memory which I would like to either tighten timings or increase frequency. According to DRAM Calculator, I can either do 3200Mhz C14 at 1.39V fast preset, 3466Mhz C16 at 1.4V safe, 1.43V fast preset, or 3533Mhz C16 at 1.45V fast...
  9. L

    Question Ram timings

    I have a 16gb xpg d41(8x2) running 3200mhz with timings 15-17-17-17-34 on my system. specs are as show below: -Asrock a320m-hdv(bios version 5.90) -ryzen 1400 3.2 -zotac 1070 mini been using it for atleast a day now and nothing has gone wrong.Am i missing something here?are the timings as it...
  10. BobMcSmith

    [SOLVED] RAM Timings vs Clock Speed

    Hi! I'm buying some new RAM, but I'm looking for more information on the timings vs the clock speed of the RAM. Here are the three I'm comparing: https://www.newegg.com/mushkin-enhanced-16gb-288-pin-ddr4-sdram/p/N82E16820226836?Item=9SIA1K64RY7998...
  11. madartzgraphics

    Question RAM not running at correct speed?

    Well, title is self explanatory. Just learned through self study that RAM doesn't really run at correct speed when you put it on your motherboard as advertised even in modern builds like someone says, many don't know this that people are not aware their system is setting them by default where it...
  12. C

    Question CAS# Latency reading as 18 in CPU-Z but set to 17 in Bios

    Can this cause BSOD? I have been getting them frequently and just noticed that in CPU-Z that the CAS# Latency is different to what I set in the bios. In the Bios I set it to 17 but in CPU-Z it shows as 18
  13. devilgodspider

    [SOLVED] OC'ing RAM, confusing UEFI/BIOS need help

    Hi there, Here are my specs: CPU: Ryzen 3700X MB: Gigabyte X570 Gaming X RAM: Crucial 4x16GB 3000MHz C16 (Model Number: BLT16G4D30AETA.K16FB) I'm trying to tidy up my ram timings, I have an overall list of faster timings thanks to the Ryzen DRAM Calculator, but my BIOS is utterly confusing...
  14. devilgodspider

    [SOLVED] What is RFC1, RFC2 and RFC4?

    I'm putting info from AIDA64 into the Ryzen DRAM calculator, and in it it's only asking for RFC but AIDA64 is showing those 4 different statements. Which one do I use? PS.: While I am at it what's the difference between tRCDWR and tRCDRD?
  15. J

    Discussion DDR3 Memory Overclock past XMP

    Hi everyone, I'm just wondering about my overclock on the 2 memory modules I am using in my PC (Using ASUS p8Z77-m pro Motherboard and I7 3770): Corsair Vengeance Pro 1866MHz CL9-10-9-27-2T 1.5V 2x8gb dual channel It is originally a kit of 4 but I purchased 2 sticks. I decided to mess...
  16. [SOLVED] Pairing a stick with a similar one.

    Hi, I'm looking to upgrade 2 laptops from 8 to 16 GB of RAM and I could use a bit of advice. One has an i5 6200U, currently populated by 2 4 GB sticks and the other has an i5 8265U with an 8 GB stick. Since I already have 2 8 GB sticks (8GB 2Rx8 PC4-2400R-SB1-11), so the cheaper route would be...
  17. S

    Is this graphic card compatible

    Hello. Will a gt730 or gt1030 run on my pc regarding the power as my psu provides 240W, max 265 it says on the sticker. i got 4gb of rams and a family x86 family processor something like that ?
  18. L

    [SOLVED] PC randomly freezing and having to force restart

    Hi All, I have an issue that is noticed 99% of the time when playing games (Fortnite, CSGO, LoL etc). My PC (Windows 10) will randomly freeze and i will have to force restart. I have run hardware tests and dont seem to be able to put a finger on it. My PC specs are: PC Specs: CPU - Intel Core...
  19. A

    comparability of old CPU and Motherboard with new GPU

    Dears, I have CPU - I7-4960x and Asus Rampage 4 Black edition, both goes to 2014, previously i had titan GPU and replaced it with 980 ti. now my question is , i will buy 2080 ti (it is two generation upgrade so it is good). However, my concern is do I need to change CPU and Motherboard ? will...
  20. A

    Ram causing bad frame tims?

    I have an i5 8400 with 1 stick of 8gb ram ddr4 and i am noticing stutter in games like cod ww2 and ac origins so i tested with msi afterburner and noticed that the frame time is pretty bad and unconsistent, what could be the cause for the stutter??
  21. Y

    Looking for help with a PC build.

    Hi all, i'm looking to build a PC to last me for a fair time (at least 2 years or so) I'm from Pakistan, so i'll have to go with a used PC (CPU, MOBO, HDD), will replace the PSU with a brand new one just to be safe. I'll have to buy the GPU separately and get it fitted to the build as well...
  22. P

    Mother board for overclocking core to quad

    I want to over clock core 2 quad 9550 can use g 31 and if not which mother board can I use . And can I do a little overclocking on g 3q to save money and increase value
  23. C

    Hue+ I need help

    I’m about to be purchasing a hue plus and need some help. My pay doesn’t have a 4 pin molex plug I was wondering could I buy a sata to molex adapter and plug it in that way ? I’m still new to this whole pc thing any help / advice would be appreciated. My psu is a Corsair cx450m. Thank you ..
  24. F

    Usb windows thing

    Hey guys Anybody knows where can i get windows 10 for a low price cause here in austria everywhere i look the windows costs 140+€ ( need the usb version)
  25. TImeSpartan

    Looking for a Good 1440p Monitor That's Well Priced

    Hello People, I'm looking for a 1440p monitor to game on. I'm not hardcore or anything and so I am fine with 60hz. I currently have a 7 year old samsung "monitor." It is 23 inches and I'm looking to upgrade. I would like a 1440p monitor that I can game on. I have a gtx 1060 so I know I won't be...
  26. B

    hp laserjet 1300

    i dont't have driver disc for hp laserjet 1300, how can i install it on my computer using windows xp
  27. K

    World Of Warcraft FPS issue, specs below. is this normal

    I7 4790 12gb ram Gtx 1080 60 hz 1080p monitor Old motherboard packard bell I have settings 5 on with shadows, ssao and one other setting turned to the lowest setting. In 25 man raids im getting 45fps. sometimes lower. at the world boss id get around 30fps with so many people. I know this game...
  28. M

    Is this motherboard compatible with the PSU and with the videocard?

    First time computer builder and I'm not sure if these two items are compatible and how to connect them with the cables. Could someone explain please?? Motherboard: MSI 970 GAMING DDR3 2133 ATX AMD Motherboard PSU: EVGA SuperNOVA 750 G2 80+ GOLD Fully Modular Videocard: EVGA GeForce GTX 970 4GB...
  29. P

    i5 - 750 planning to upgrade temporarily with Sandy Bridge

    Hello guys, At the moment I am running the following configuration: I5-750 Dell Vostro 430a Motherboard TeamGroup Vulcan Red 8GB DDR3 2400MHz CL11 Dual Channel Kit SAPPHIRE Radeon™ R9 390 NITRO, 8GB GDDR5, 512-bit, Back Plate SSD Intel 535 Series 120GB I would like to know if it's worth...
  30. H

    List of incoming DoS attacks to show known malicious IP addresses

    So because of what I do on YouTube, exposing cheaters and hackers in gaming, they often get quite angry at me and attempt to DDoS me if they are even able to acquire my IP. My router and internet are too powerful to even stutter however. Because i am aware someone just tried to attack me once...
  31. DaEdRiC DREAMORA

    Dell S2440L Monitor issues: color ghosting?

    Hi people, I just recently bought this monitor after having several reviews on Dell S2440L. It has nice display but has some issues as well. Can anybody tell what causing this type of problem in display? Is it ghosting or anyting else? If so how can it be fixed? FYI, i have the latest...
  32. C

    PC Gaming Build

    Hello, I wanted to get some opinions on a gaming rig I put together. I will mostly use it for moderate gaming and school work. Here is the link to my build: http://pcpartpicker.com/p/fLF9Lk Thanks everyone.
  33. Z

    Monitor used to hit 75hz?

    I formatted my hard drives & re-installed windows, re-installed the newest NVIDIA drivers, restarted PC. Went to the NVIDIA control center and I just realized I can't put my refresh rate to 75hz like I used to... why is this? It's locked at 60. Fixed. Set your perform scaling to "GPU" if you...
  34. A

    Will this fit in a NCASE M1 V3?

    My build: PCPartPicker part list / Price breakdown by merchant CPU: Intel Core i5-4690K 3.5GHz Quad-Core Processor ($222.75 @ OutletPC) CPU Cooler: NZXT Kraken X41 106.1 CFM Liquid CPU Cooler ($99.99 @ SuperBiiz) Motherboard: Asus Z97I-PLUS Mini ITX LGA1150 Motherboard ($148.99 @...
  35. Z

    psu preventing graphics card from booting

    hi all i wanted to know if my power supply is preventing my asus gtx 560 graphics card from being detected.the fans go on but it doesn't work my psu is LPG6 500w(not sure of the name probably shizzle quality)well on the psu there is two 12v numbers one is 16.5A adn the other is 20A now im new...
  36. M

    What ssd do I need

    Hi, I want to get an ssd for my desktop but am unsure what one to get. http://globalsp.ts.fujitsu.com/dmsp/Publications/public/ds-ESPRIMO-P400-E85.pdf this is the sheet with my computers specs on it. What SSD should i get?
  37. R

    I reinstalled windows, webcam aint't working now

    I recently got windows reinstalled, since then, my laptop's webcam is not working, i have samsung laptop, 300E5v, pleaase help?
  38. K

    PC Turns on, no display.

    I've decided to use spare parts I had around to build my dad a new comp, and while everything succeeds to turn on, it doesn't seem to work. I've made sure all the power connectors were connected into the mobos and the GPU, I've also made sure that the RAMS are right in place. I also tried...