• Happy holidays, folks! Thanks to each and every one of you for being part of the Tom's Hardware community!

Tom_SideWindeR

Distinguished
Sep 6, 2016
22
1
18,515
Hello,

Last week I built a new pc.
Here are the specs:

MSI B450 Tomahawk MAX
AMD Ryzen 5 3600 WRAITH with stock cooler
be quiet! Pure Power 11 CM 600W
Gigabyte 515GB SSD
Asus GeForce GTX 1060 3g
8gb Crucial Ballistix Sport LT 2400MHz DDR4


When I power the pc on for the first time on a given day, everything boots and works just fine. The pc will boot in the expected time for an SSD.

However, when I power the pc off, and on again, it has some trouble booting. All the lights of the peripherals turn on, but nothing happens for a while. Then, the peripherals shut off again, only to turn back on a few seconds later. Only then, the pc will boot. It takes about a minute and a half for the system to be fully operational.

If I turn the pc off, completely remove power, as I would when I go to bed, then turn it on again, everything is fine.

I've already tried to switch to UEFI Mode instead of CSM. Also placed the SATA cable of the SSD in a different slot, thinking the first slot might be busted.
Also updated to latest BIOS version.
This didn't help.

Any suggestions or ideas are greatly appreciated!

Thank you in advance!

Tom
 
Last edited:
just trying to think of a solution to your problem is there any different way that could power your devices from different ports on the PSU or just change a few of the cables might be worth a shot.
Tried to use the cables from my old rig, which worked fine. No difference unfortunately.

Thanks for trying to figure this out for me!