Question new build boot problems

[Tom_SideWindeR]

Hello,

Last week I built a new pc.
Here are the specs:

MSI B450 Tomahawk MAX
AMD Ryzen 5 3600 WRAITH with stock cooler
be quiet! Pure Power 11 CM 600W
Gigabyte 515GB SSD
Asus GeForce GTX 1060 3g
8gb Crucial Ballistix Sport LT 2400MHz DDR4


When I power the pc on for the first time on a given day, everything boots and works just fine. The pc will boot in the expected time for an SSD.

However, when I power the pc off, and on again, it has some trouble booting. All the lights of the peripherals turn on, but nothing happens for a while. Then, the peripherals shut off again, only to turn back on a few seconds later. Only then, the pc will boot. It takes about a minute and a half for the system to be fully operational.

If I turn the pc off, completely remove power, as I would when I go to bed, then turn it on again, everything is fine.

I've already tried to switch to UEFI Mode instead of CSM. Also placed the SATA cable of the SSD in a different slot, thinking the first slot might be busted.
Also updated to latest BIOS version.
This didn't help.

Any suggestions or ideas are greatly appreciated!

Thank you in advance!

Tom

 

[RARRAF]

well on a new build you generally need the chipset drivers and direct x
https://www.msi.com/Motherboard/support/B450-TOMAHAWK-MAX#down-driver&Win10 64
https://www.microsoft.com/en-us/download/details.aspx?id=35
but as to your problem not too sure maybe these will help.

 

[Tom_SideWindeR]

well on a new build you generally need the chipset drivers and direct x
https://www.msi.com/Motherboard/support/B450-TOMAHAWK-MAX#down-driver&Win10 64
https://www.microsoft.com/en-us/download/details.aspx?id=35
but as to your problem not too sure maybe these will help.

Thank you for your response!

Just tried your suggestion, unfortunately no difference.

 

[RARRAF]

just trying to think of a solution to your problem is there any different way that could power your devices from different ports on the PSU or just change a few of the cables might be worth a shot.

 

[Tom_SideWindeR]

just trying to think of a solution to your problem is there any different way that could power your devices from different ports on the PSU or just change a few of the cables might be worth a shot.

Tried to use the cables from my old rig, which worked fine. No difference unfortunately.

Thanks for trying to figure this out for me!

 

[Tom_SideWindeR]

Solved, disabled fast boot