Tom's Hardware Member System Gallery

Page 60 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
Toggle sidebar Toggle sidebar

nice, i like it. so that card can power three displays?
 
@gcmartini, the Noctua keeps my 2500K @4.2 under 45C even when folding for hours on end (all 4 cores maxed)
@aznshinobi, it's a HAF 922, and the card is great. I hear it O/Cs well but I only put a small bump on it. It comes from the factory (XFX) with 900/1425.
@tjosborne, 4 displays! 8D A 3 screen eyefinty setup plus a 4th for info. All 1080p.
 


Only thing I would change is the heatsink orientation. Or is it a monster that wont fit due to the memory? Seen a lot of those latley, not sure why companies are doing that knowing the memory is right there.

The only reason I say is because now it will pull hot air up from the GPU which is not good.



Yea. A HD5870 can as can most all of the HD6K series, as long as it has at least one DP. Its the DP that allows the third display when used in a active setup.



45c seems a bit low for full load. Unlss its not full load or you just have it really cold in the house.

Its times like these that I wish I was in Siberia instead of AZ. Pipe some nice iceberg cooling to my PC.
 
@jimmysmitty, Weather has been pretty cool here lately. Right around 18-20C (~65-70F). As far as I can tell it's a full load, but it may not actually be. I'm not exactly sure how F@H uses CPUs. I'll run prime95 and see how it does with that.
 


wow, really sick!
 

sorry, i meant 4. i guess i cannot count today, lol
 
Camera's garbage... but here goes...
umev2.jpg

WP7DW.jpg

Gotta give the OP a little love.
O5EsE.jpg

and finally, for cable management:
sHUiU.jpg

(note the headless laptop in the background)
 
Man those massive heatsinks are a tad annoying. Can't put them proper to pull air from the front so you have to pull it from the back of the GPU.

And yes, nice cable job.

Man I wish I had a modular PSU now.... A nice AX850W instead of the TX850W.....
 
My Build

Specs
CPU: I5 2500k @ 4500mhz 1.265Volts
MoBo: Asrock Extreme7 Gen3
Ram: g.Skill 2133 Mhz 8Gig
PSU: Corsair 850 Gold Modular
Case: Corsair 650D
Video: Sapphire 7970
Cooler: Corsair H100
SSD: Samsung 830
Fan Controller: Scythe 4 Channel with LCD
Cables.JPG

Front.JPG

inside.JPG
 
One suggestion, can you guys edit your posts with 1080 or 720p pictures? I hate to scroll on my 32" screen to see the entire picture, it is harder to make an opinion if i only see 1 quarter of the image and have to scroll. Plus not all images are made in optimum conditions and there is lots of noise.

 



It was the same... I did some cable re-management before the pictures(both threads) because the side pannel was hard to get on..

The USB 3.0 Trick took up a lot of room... (Instead of Looping back via gromets on the back, I used the device that came with the motherboard for a back side USB slots to hook up the front USB3.0's which took up a lot of room the cables from the case were very thick, and the device cables were very thick and both longer then they ever needed to be)
 


Actually I believe that it is pushing air onto the gpu.... That 7970 can get pretty hot and that might actually help a bit.
 


The airflow of the case comes from front to back side where is exhausted for the top and back side of the case, installing the cooler in that way not only don't help to your CPU temps, also takes the hot air of your GPU for cool the CPU.
 


How would it take hot air from the gpu if its blowing onto it. That doesn't make any sense.
 
Blowing away from GPU. Too poor to buy any more AS5 so for the moment I have to live with it... I appreciate all the opinions everyone! I just painted all my sata cables as well as my 7970. The cables look nice! the gpu... well, that's to be seen...
 
So finally finalized the sale and purchase.

Officially getting my Gigabyte GA-Z68X-UD3H-B3 and my Zalman CNPS10X Performa in 2 days :) Tried to be a little different in my choices that most people w/ the choice of the G3 revision Gigabyte and Performa.
 
Just a little update... Finally got my second card for SLI :)

6837290472_588cdc6971_b.jpg




Performance wise... THEY'RE GREAT! BF3, RAGE, and etc... all run phenomenal especially for being 1GB cards; I couldn't be happier here!

Temperature wise... OMFG ARE YOU SERIOUS? I guess being so close together they run hotter than I'd like... At idle I can't complain, GPU1 @ 35; GPU2 @ 32, however, when I start gaming GPU1 tends to drift up to 10-12 degrees higher. Benchmarking... GPU1 hits almost 90 degrees while GPU2 hangs out around low 70s.

Overall... This'll get me by for now until later in the year when a few of the aftermarket Kepler cards come out. I figure I go back to a single card setup that's COOL, and possibly nets even higher performance.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom