Question Windows 10 won't boot from new SSD

[KokoAkos]

So I have ASUS FX503VD, and I bought Samsung 970 Evo Plus 500GB. Next to ssd, there is 1TB HDD. Of course I want to do a clean install to SSD, but I have some problem.
When I install Windows 10 to SSD, it goes properly in the beginning, and the system reboot the laptop. After this, it doesn't continue the install (Where I can set wifi connect, account login..etc). but it load again the installer from USB and I see this:
https://imageupload.io/9FokwgM75O.i

And if set in boot priority SSD to #1 or I unplug USB before reboot, it gives this screen:
https://ibb.co/f0HbF72

I tried some solution:
I set AHCI
new SSD is GPT and Active
I tried unplug HDD, when I tried install win 10 to SSD.
I enabled CSM Support.
I can install windows 10 to HDD, and after this I can use SSD after format.

But nothing worked. Any idea what can i do? Or I have to try install win 10 to HDD and after this, clone it to SSD?

 

[KokoAkos]

When i enable CSM Support, Samsung SSD appear in Boot priority, and after installation menu, i set it to #1 in priority. After that it reboot, I don't get any message, just black screen. Some minute later it reboot again, and in the upper left corner appear for one second a prompt line, but I got black screen again.

 

[KokoAkos]

I cloned now the Windows to SSD, and I changed the boot priority, but I got again this screen:
https://ibb.co/f0HbF72

So thats not worked too.

 

[jay32267]

Power down....disconnect the HDD...and THEN do the clean Windows install.

 

[KokoAkos]

Power down....disconnect the HDD...and THEN do the clean Windows install.

I tried it in this order, but same result. Boot first part of installation or black screen if I change #1 boot priority to ssd.