DIMM

Forum discussion tagged with DIMM.
  1. F

    Question Half of the motherboards RAM slots do not work

    Hello everyone. I am posting about an issue that I have been trying to solve for almost two years and cannot fix. I am hoping someone can either help me fix the issue or confirm that it just might be that my motherboard is broken. The issue is that only half of my RAM slots work. The...
  2. A

    Question Help me purchase proper ram...

    Guys, I am stuck in a problem. I have a 8 years old pc with motherboard foxconn-g41mxe, having processor Intel pentium dual core cpu 5500 at 2.80ghz And a 1gb ddr3 ram. Now I want to upgrade my memory to atleast 4gb. Anything above it will also be fine. Now I am not able to choose the...
  3. J

    [SOLVED] Mismatching ram sizes, is it ok?

    I have 2x 4GB Hyper X Fury DIMMs in my pc (https://www.amazon.com.mx/gp/product/B00J8E92R6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 ) I want to double that, so I have 16GB total. Is there any problem if I grab a 8GB module or should I get 2 x 4GB so its all the same? This is the one I...
  4. Question IBM System x3950 M2 - DIMM on Memory Card is affected

    Hello, I have an IBM System x3950 M2 with 128 GB of memory. The system boots up fine but I have a few errors at the boot process. Just this means that the memory is corrupted, but somehow the system still manages to boot?
  5. D

    Question Possible bad dimm stick/slot, need help!

    I’ll try to keep this as short and to the point as possible. The other day I updated the bios on my Strix B450-f gaming mobo (granted my pc is only 8 months old), and the next day while playing a game I got my first BSOD with the “memory managment” error. That happened a few more times, and...
  6. J

    Question What is the latency of RAM (DIMM) and PCIe?

    What I want to know is approximately the amount of latency induced by PCIe and by RAM? I want the latency from the CPU to the DIMM slot and to the PCIe slot (so no round-trip latency).
  7. J

    [SOLVED] Are there any Male to Male RAM (DIMM) riser cable?

    I would like to know if there is such a thing as this. I am curious to know if this exists (so don't ask me "why?).
  8. J

    [SOLVED] Are there any PCIe/M.2 to RAM (DIMM) adapter out there?

    I don't know of any PCIe or M.2 to RAM (DIMM) adapters, so I would like to know if anybody here knows of such a thing. I am talking about PCIe/M.2 to DIMM adapters, not the DIMM to PCIe adapters that allow RAM to work over the PCIe bus (inherently at a slower rate/higher latency). Also, I am...
  9. J

    [SOLVED] What is this riser?

    I found this riser online and I don't know exactly what it does. So can anyone help me? (https://www.aliexpress.com/i/32949852202.html ) So far, I believe these are 2 possible options (but I'm open to other options). It could be: 1) An actual DIMM to M.2 or SATA riser that can store/cache the...
  10. S

    Question Ram slots not recognized

    Hey everyone, I just built my new computer and I've run into an issue with the motherboard only recognizing one of the four ram slots. I've tried multiple arrangements and have swapped the ram in the working slot to rule out the ram being the issue. When I've tried other arrangements I keep...
  11. J

    [SOLVED] Can you use a male to male DIMM riser as a highspeed interconnect between computers in a cluster?

    Can you use a male to male DIMM riser as a high speed interconnect between computers in a cluster? You could get the lower latency than PCIe and a decent amount of bandwidth (according to kanewolf, latency is WAY more important than bandwidth). So would that work?
  12. jerathesage

    [SOLVED] DIMM in UDIMM motherboard

    Hi, I have question about ram for ASrock B360M pro4 motherboard. On ASrock site for B360M pro4 motherboard in technical specification section says that "Supports DDR4 2666 / 2400 / 2133 non-ECC, un-buffered memory". Ok I know that ECC is server side RAM but I am not sure about "un-buffered...
  13. J

    Question Big issues adding new ram

    Recently I tried to add more ram to my pc, going from 2x8 go to 4x8gb. But when I added the new ram the pc would power on but no picture would be displayed and the red memOK light came on. I pressed the button to do a memory check but the computer remained dysfunctional. I took the two new...
  14. T

    Question CPU heating problems?

    So I recently finished building a new PC. I got an i9-9900k with a H100i Pro cooler. As far as I could tell, I applied enough thermal paste, put the block on right, put the fans in the right spots, etc. When I run my CPU under 100% load, it zooms up to around 90 degrees Celsius and hovers around...
  15. M

    Question I have a huge stuttering and fps drop in games

    Hello Friends I have a problem My system is Rtx 2060 X370 asus prime Ryzen 5 1600x oc to (4GHZ) ram 2*8 crucial 2400 Cl 17 1TB HD BLUE WD P.S Bitfinix PBA 500W Am facing some huge stuttering when i'm unlocking FPS and lags that i can't stand could you guess what's the issue ? Temperatures are...
  16. M

    Build Advice Another Budget Build for Family Member

    Hi, I was hoping to obtain your input on the build I put together. The goal is for my mom to use this setup for general email/web browsing, but she likes to dabble in some media editing and photo editing using native programs and freeware. We do stream from this PC to a Roku/Chromecast and...
  17. T

    Question Best cooler for rtx 2080 and i7 9700K?

    Best cooler for rtx 2080 and i7 9700K? Don't want water/liquid cooling please!
  18. A

    Question Intel(R) 82579v Gigabit Network Connection problem

    Hello everyone So to make it simple. This morning i've upgrade my DH61CR Bios version 0038 to version 0099. Since then i've been unable to connect to the internet because of ''This device cannot start''(Code 10). It was still working fine when i've went from 0038 to 0048. But now nothing and i...
  19. Z

    [SOLVED] PSU

    I have a i5 9600k trying to overclock to 5.2 GHz and have a 1070 ti. Is 550w enough?. At 4.9 Ghz gaming is nit a problem. But when I overclock to 5.07 GHz sometime the pc crashes (whea_uncorrectable_error) and the pc would show the same error while booting with 5.2 GHz with 1.55v and 1.6v...
  20. rocknsou1

    Question Facing cooling issues - unable to determine cause

    In the last week or so, I've begun facing some issues with my CPU temp that has led to 3 freeze/shutdowns. I have a Noctua - NH-D9L and Intel i7. Mobo is Asus - Z170M-PLUS. Twice, I've gotten an overclocking error (can't remember the exact verbiage). Today, I got a temp warning post-freeze...