#ram

So I just upgraded my RAM and wanted to take advantage of the new 3200MHz speed that I could utilize. I normally just turn on the XMP profile in the BIOS, and everything works out, however, I noticed that whenever I did use the XMP profiles, my PC would no longer boot, and finally, I saw this...

Hi guys, Since i started to look and ask for advices to build my new PC, i often saw that strong GPU's are using DDR6 RAM type, and most of the RAM types if not all of them, if we talk about Corsair, Vulcan...etc., good ones i mean, are DDR4. So my question is, this DDR6 and DDR4 difference...

I recently had my computer in for service because a problem that was unfixable. They changed the Mobo, ram(because last was faulty even tho it was new and worked when i leaved it to them), and case fans. Since then, i tried to enable xmp with 3200 mhz. It goes into a reboot loop for about 5-6...

So I want to upgrade my Corsair vengeance lpx 8gb ddr4 2400mhz to 8+16 gb Corsair vengeance lpx ddr4 3200mhz. If I do so, will they run in dual channel mode? My motherboard is Gigabyte h110. Thanks.

I have some CPU problems, i asume, because my CPU usage seems to be at 100% nearly all the when i'm playing games and it's taking a toll on my framerate. (I'm mainly refering to CS:GO here, but the same happens with Destiny 2, Warzone, Fortnite, and games where there's a lot happening on the...

Hi I dont know why but my rams are stuck at 2133MHz even though my CPU and MB supports higher speeds and ram it self is 3200MHz CPU: AMD Ryzen 5 3600Xt MB: Asus Tuf B550-Plus Ram: Corsair vengeance LPX 2*8GB 3200MHz

Hi. as title says, i mounted my 2x8 GB rams 2133 mhz with same specs and same manufacturer into slots 2 and 3. The reason i mounted it in DIMM 3 instead of 4 is that when i tried it on 4, the pc is not booting up. Therefore, i tried the slot 3 and it works. My concern here is that, is my pc...

Hello, my motherboard is h-ig41-uATX and it has a max of 4GB ram. Obviously that is a problem in the gaming side so i need some help finding a very similar motherboard but with higher ram like 8 or 16. Motherboard has to support everything the h-ig41-uATX does. Please help me people...Thx

Well...i have 1gb ddr3 and 2gb ddr3. I installed the 1gb ddr3 and jt worked fine. But when i added the 2gb ddr3 it didnt work, pc says 1 short beep 1 long beep which of course indicates that there's a ram problem. Now, i installed 2gb ram alone and still same gosh darn thing. 1 short beep 1 long...

I just add another 2 stick of memory 4GB @2666MHz to the other unoccupied slots.. The result looks good showing 16GB of RAM installed but as you all can see it's only 7.93GB in the bracket(as shown in Windows and Task Manager specs.. Is this normal? Thanks in advance! Ryzen 5 1500X Asrock B450M...

Hi! i recently built a pc a few months ago and noticed that the ram was not preforming to the standard it should be... its runnung at 2111mhz instead of 3000mhz , i havent reakky gone messing around with it as thats a little out of my comfort zone but maybe 1 of you guys can help! My ram is...

I have building a pc for my dad it's in budget and for typing and little poster creating in graphics I bought athlon 200ge Gigabyte a320m s2h 1tb hdd 7200rpm 8gb 2400mhz ram I bought a case psu combo which is 250w But my problem is my psu have 4 pin connector but my mobo has 8 pin connector is...

So i have mixed ram 2 sticks of corsair vengeance ram at 2133mhz and 2 sticks of corsair xms3 ram at 1600mhz.im currently running my ram at 1800mhz . My specs I7 4790 Gtx 1070 16gb ram Z97 gaming 5 The timmings for the vengeance ram is 11-11-11-27 and the timmings for the xms3 ram is 9-9-9-24...

My computer wont boot with 2 x 8 ram sticks on 2nd and 4th slot in mobo, but it will on the 3rd and 4th slot, but it will on 1x8 on the 2nd slot.

i have a B250M PRO-VD motherboard and i wanted to upgrade my pc. My friend has CORSAIR 16GB 2X8GB 2666MHZ DDR4 VENGEANCE LPX BLACK and i was wondering if it would work with my motherboard (CPU: INTEL CORE I3-7100 )

Well, the title says everything. Recently or for awhile now i've been wanting to know how much performance a ram overclock could really present for an amd ryzen cpu. I ran a successful ram overclock once at 2866MHZ I think and it gave me a lot of performance (unless it was just a placebo...

I've been trying for 2 hours now to get this to work and I've read several forum recommendations. I don't think the PC specs are that important in this case but it's a pre built PC that I was taking apart to test something else (I didn't have the right adapter so i scrapped that). It was working...

specs AMD FX 6300 1050 ti 1600mhz 16gb ddr3 ram GA-78LMT-USB3 6.0 I need a upgrade soon I have had this pc for over 2 years and i'm getting kinda tired of it any recommendations? I'm using the pc for mainly gaming.

I had bought my PC in august last year, everything was brand new, so my PC has problem with its RAM. I need to put my RAM speed from its native 2400mHz to 2133mHz, to load windows. Everytime I put it on Auto or set it to 2400mHz it freezes on loading windows. And when its on 2133mHz it works...

Can an MSI Z170A Motherboard handle 16gb 3200mhz of ram?

My task manager is absolutely clogged up with service hosts. All using up so much ram. 98% because each service host takes up around 180-190mb! Any way to lower that? I have a Dell G7 laptop, with 16gb ram. Mike

hey guys! there is some questions about having a stable frame rate in Games! so i just made my pc i'm totally sure that this issue not realted to my cpu or gpu, trust me tho!! but when i go in some games like cod mw, when a new map wanna load, in first 2 or 3 minutes, the fps jumps from 60 to...

I have HP Pavilion dv6-21em Intel Core i3 CPU M 330 2.13GHz with 2x2GB RAM, my laptop supports up to 8GB upgrade. I needed upgrade and I went to Crucial website and their analytics showed compatible memory Crucial 8GB Kit (2 x 4GB) DDR3L-1600 SODIMM. Since it was out of stock I find Kinston...

Hi guys, I'm a new user on this forum! I needed to join this community because I'm seeking a solution to my problem; today I built my first PC PC Specs in case you need them to help me: CPU: Ryzen 3400g GPU: Radeon Vega 11 Motherboard: Asus TUF B450-Pro RAM: 2x8gb HyperX Fury (Kingston) DDR4...

I have 16GB of ram and for some reason it idles around 40% when basically nothing is open but nothing is using anything more than 100MB other than discord.

I'm going to buy a Ryzen 5 2600x and new rgb ram for under £86 whats the best for performance i was thinking corsair rgb vengeance 3600mhz cl16 help me and what settings should it be on i'm confused and whats best ram to get?

I have a Dell XPS 15 (9550) with manufacture installed "16GB DDR4 at 2133MHz - 1 DIMM" in slot 1. Slot 2 is empty. Can I add "Crucial 16GB DDR4-2400 SODIMM" to slot 2, making it 32GB, or do I have to buy two of these so each RAM is identical? Is there anything else I should be considering or...

I currently have 8 GB of ram installed in my system. But it seems like that only 3.93 GB of it is usable. I tried solving this issue myself using common ways from the tutorials i found on YouTube. It doesn't really work for me after several attempts. It might be me making a mistake or the ways...

Hi, I have a PC with the below specs but it stopped working sometimes ago. The issue was that the PC used to work sometimes and sometimes not. Sometimes it works perfectly but sometimes it just shuts down suddenly while working. Recently it hasn't been working at all. When i got it checked...

Hello to anyone taking the time to read this, ive acquired a new HP laptop and installed Windows 10 Pro on it. The problem is the RAM. There is 8GB of DDR4 RAM installed, but 2,1GB hardware reserved and 2,3GB constantly IN USE. After all those schenenigans im left with 3,6GB to use, so sad...

Can this cause BSOD? I have been getting them frequently and just noticed that in CPU-Z that the CAS# Latency is different to what I set in the bios. In the Bios I set it to 17 but in CPU-Z it shows as 18

Hi,i have a question about mixing rams.I have laptop and i installed cpu-z for checking cl ratio of my ram and it was 15cl and sometimes decreasing to 10cl. Also it is 2133MHz DDR4. But i want to buy 2400Mhz 17cl ram and everybody saying it must be same cl ratio and mhz. But i cant find same...

I built my system a year ago, mainly for CSGO, but my frames are as low as 90 in some scenarios, for example, on nuke outside I get similar performance as my friend with a 1050ti paired up with an i5 8400. But he gets higher. I am lost about what to do, can anyone reference, anything that can...

Hello, I have ordered this Corsair CMZ4GX3M1A1600C9 Vengeance 4GB Single Module DDR3 Memory DDR3-1600MHz 1.5V https://www.corsair.com/ww/en/Categories/Products/Memory/High-Performance-Memory/Vengeance®-—-4GB-Single-Module-DDR3-Memory-Kit/p/CMZ4GX3M1A1600C9#tab-tech-specs Is it compatible with...

Will the laptop work with (HyperX Impact 16GB 2666/2933 memory) on my laptop (ASUS GL553VE FY022T) that only supports 2400? I want to buy this memory in order to rearrange it later in another laptop , or i just need to put some 2400 memory and not worried?Thank!

Hello my people I have a little question to ask, I gave my little brother my old PC when I say old its pretty old, It was upgraded though and now runs a few games at pretty decent fps, but anyway... Specs ---- Mobo : asus p7p55d-e Ram : samsung 1333mhz ddr3 8gb 2x4gb running at 1.34v Gpu : gtx...

Guys I have a B450 GAMING PLUS motherboard from msi,and i have 1 stick of 8 gb ddr4kingstong hyperx ram instald,I own another 2 sticks of 4 gb of the same brand and speed can i place them in?

Hello. As you can see on the screen below my ram timings are 16-17-17-35 although I set the XMP profile in BIOS with the 15-17-17-35 timings. I also noticed that if I change CAS latency in BIOS to 15, it jumps to 16, if I set 17, jumps to 18 etc. but if I set 16 or 18, the value doesn't change...

Hey Fam, I am new into pc building and a couple weeks ago built a new pc after waiting for so long for the ryzen 3rd gen cpus. I am using Ryzen 7 3700X Gigabyte Aorus X470 Gaming 5 wifi Corsair Vengeance LPX 32GB (16*2) 3000Mhz RTX 2070 Super After all the latest bios updates i enabled XMP so...

It says that you can use 3200mhz ram but says (oc) next to it https://www.newegg.ca/p/N82E16813145086?Item=N82E16813145086 Can someone pls let me know if that means it will work or i can get that speed if I overclock it if i get 3000mhz