XMP

Which one should i enable through ai overclock tuner? For best ram speeds? My motherboard is asus a620m-k, rams are DDR5

This may be a stupid question but... Can 3600MHz ram be "XMP"'d to 3200MHz? The Elaborate, I'm looking to buy 3600MHz ram but my motherboard can only take up to 2933MHz. It says it can take up to 3600Mhz O.C and that it supports XMP. How could I O.C a ram stick that is already running at a...

hello im recently switch to this combo R7 7800X3D Asrock B650e pg riptide RTX 3080 Galax Corsair Vengeance RGB 64GB 2x32GB When my bios at 1.21 ver, I can use XMP 5600 profile fine, no problem. But after i update my bios to 1.28, i turned on XMP, saved and restart. After that my PC wont boot...

I've been using this PC for approximately 6 months perfectly well from Jan to June. One day, it failed to POST, so I took it to the store. They diagnosed the issue as a malfunctioning RAM module, replaced it, and the PC booted up fine. It worked perfectly well for the next 6 days, but on the 7th...

I tried enabling XMP and using 2933 MHz for my RAM but when I save settings and my PC restarts, when I check my RAM, it still in default speed: 2133MHz. When I check back the BIOS, the XMP is enabled and saved at 2933 MHz but doesn't apply for some reason. Why doesn't it apply the changes...

Hello, I have a Ryzen 5 5700x, an Asrock X570M Pro 4 motherboard, and 2x8gb of G.Skill Trident Neo 3600mhz ram. I've been trying to overclock my ram, but I cant seem to push past 3000mhz. I have set the ram voltage to 1.35, and it was able to OC from 2133 to 3000. Trying to load XMP profile is...

Hi there, I am stuck at 2133 mhz, I can enable xmp profile, however my games crash about 5 minutes after playing with xmp enabled, what can I do? https://www.userbenchmark.com/UserRun/63462082 ^my benchmark

Hello, I've been struggling to make my XMP stable, I've tried reducing the speed, loosening the timings, increasing DRAM voltage, and I still get no signal (but get to the desktop after a few seconds) at 3200MHz. The only thing I haven't tried changing is VCCSA because I feel uncomfortable...

Motherboard: Asus Rog Strix GL12CX (Model Number 60PD02P0-MB0B04) Old Ram: Samsung 16gb (2x8gb) PC4-2666V-UAS-11 (M378A1k43CB2-CTD) New Ram: Corsair Vengeance LPX 32GB (2x16) 3200mhz (CMK32GX4M2E3200C16) Reading through the forums for this motherboard, people have had similar issues, Maybe the...

Hey, this is my first build in around 7? years, so I haven't had to deal with DDR5 before, nor XMP profiles. Unfortunately I have run into an issue where my ram isn't being fully utilised. I purchased two Corsair Dominator Platinum DDR5 32GB 6200MHZ (CMT32GX5M2X6200C36W) and as the title states...

I think I'm in a weird situation. My current specs are, Ryzen 5 2600x Asus b450 M-K 2x 16gb 3600mhz corsair ram My ram speed at 3600 was unstable from the start because of my mobo and cpu but i could enable D.O.C.P at 3200 mhz (default d.o.c.p profile) and it was stable. Unfortunately i had a...

Hi there, (posting specs to start) MOBO: GIGABYTE - B650 AORUS ELITE AX CPU: Ryzen 5 7600X RAM: CORSAIR - VENGEANCE 32GB 6400MHz PC5-51200 DDR5 C32 DIMM I was trying to enable EXPO in my bios, but I only had the option to enable XMP1, and I dug around on Gigabyte's website and think that its...

Hello. I have the Corsair Vengeance RGB DDR5 2X16 6000 CL36 (CMH32GX5M2D6000C36 ver.4.43.02) memory kit on a MSI Pro B650M-A WIFI with Ryzen 5 7600X CPU. The ram kit is not on the motherboard's QVL list, and doesn't support EXPO profiles. I use XMP profile (36-36-36-76, 1.35V) and it runs fine...

Hello! Quick question, I am updating from 16gb of 2133mhz ram to 32 gbs of 4000mhz ram on a b450 tomahawk max. I have never updated the bios before (and am kind of terrified of updating bios) and was wondering if it was going to be required to run at this speed. I have not found anything online...

Hello Tom's Hardware community, I recently built my first PC and I'm experiencing some issues with my RAM that I could use help with. Here are the specs for my build: - CPU: Intel Core i5-13600KF 3.5 GHz 14-Core Processor - Cooling: Deepcool LS520 SE 85.85 CFM Liquid CPU Cooler - Motherboard...

Help, when i enable my xmp at 3200mhz i get a bluescreen upon boot up Im running with these specs: R5 3600 3070ti rog Rog x570e 4X 8gb 3200mhz g.skill trident z 750w 80 gold What do i do here guys

Hi, I've been running at 2133 MHz and have recently tried to enable XMP to get the advertised 3600 MHz but when I enabled it, my computer refused to post. I then cleared the CMOS then tried to just manually set the speed to 3600 MHz (I forgot the name of the exact setting) and again, computer...

Salve community, oggi ho ricevuto le nuove ram (32gb) ovvero: ADATA XPG GAMMIX D10 Desktop PC Memory PC4-28800 DDR4 3600MHz 16GB x 2 Nero sostituendole con le vecchie da 16 gb 21400mhz(XPG GAMMIX D10). Dopo averle inserite ho notato, tramite gestione attività" e bios" che sono impostante a 2666...

I am troubleshooting instability with crashes when xmp is enabled. I downloaded and installed the latest chipset drivers from Gigabyte, it installed fine but it's been half an hour since I clicked restart and the screen has stayed black. The mouse and keyboard lights also went off however the...

I have a fairly old pc, but it works for what I need it for and the few games I do play. I added 2x4GB of G Skills ram a few months ago. I wasn't aware for best compatibility; I should have ordered 4 sticks in one set. CPU-Z shows XMP 1.2 running on the newer pair of ram. However, in the older...

First My Specs CPU – Intel I7 10700K Motherboard – MSI MPG Z490 Gaming Plus GPU – MSI RTX 3060Ti 8GB Gaming X Trio RAM – Adata XPG 16GB 3200mhz DDR4 Gammix D30 Adata XPG 16GB 3200mhz DDR4 Gammix D30 Cooler – Cooler Master Hyper 212 Halo Black I can't able to tweak memory above 2800mhz...

So, I have a Ryzen 5 1600AF (Zen+) processor and an MSI B450M PRO-VDH MAX motherboard. Before the upgrade, I had two Crucial green RAM sticks running at 2400 MHz, and I replaced them with G.Skill Ripjaws V 3200 (2x8GB) with 16 timings. I immediately enabled XMP in the BIOS, and everything...

With both XMP profiles everything is the same except these three options. XMP Profile 1 has these three settings on AUTO which allows the motherboard to use the most stable known setting(from what I've read on Google) where XMP Profile 2 have these completely set with number values which is...

I thought I was buying almost identical RAM sticks, the main difference being LEDs. One Kingston FURY KF432C16BBK2/32 https://www.kingston.com/dataSheets/KF432C16BBK2_32.pdf Another Kingston FURY KF432C16BB1AK2/32 https://www.kingston.com/datasheets/KF432C16BB1AK2_32.pdf When I enabled XMP...

Hello, I've recently moved to i9 13900k platform with the follow components: i9 13900k MAG Z790 TOMAHAWK WIFI DDR4 F4-3200C16-16GTRS x 4 dimms Gigabyte rtx2070 super When I got into bios to enable XMP the system restarted and locked without sending any signal but the memory fail led was on...

I recently purchased a prime z790-p wifi, 13700k, and g.skill ripjaw s5 6000 16x2gb memory. For reasons unknown to me, I am having issues getting it to run at the advertised speed. Xmp only results in an endless loop and will not boot. Manually setting it to higher speed does the same. I noticed...

Hello everyone, i owned corsair vengence 2x8gb 3200mhz cl 16 ramsticks, runnin xmp profile 1 at 3200 mhz getting dram freq. 1600 mhz. Now I bought 2 more exactly same ramsticks and add to my pc, im using MSI MPG z490 gaming edge wifi, which supports xmp profile 2 and my ramsticks. BUT , the...

I run into a strange issue with my PC when I enable XMP. Computer won't boot the first time I press the button. Fans spin, CPU LED on motherboard stays on and no boot. If I press the reset button on the case while my PC is in this state it boots normally and have no problems afterwards. After a...

Hello, wanted to ask if i should enable XMP. Just bought DDR4, 32GB, 3200MHz, CL16, Kit of 2 It's running at 2133MHz in task manager Specs: GIGABYTE H410M-H V3 Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz Here is CPU-Z screenshots if these help to answer.

I just bought more ram and I'm only running the 2 new sticks but my systems boots to safe mode when I raise the speed above 2666mhz. CPU 12th Gen Intel(R) Core(TM) i5-12600KF Motherboard ASUS Prime Z690-P WiFi D4 New ram G.SKILL Trident Z Neo Series 64GB (2 x 32GB) 288-Pin PC RAM DDR4 4000 Any...

I've a haswel-E built with an msi mb, & a 32 kit of 4x8, dual rank, 2666 cl16 ram sticks, Crucial ballistix Elite BLE8G4D26AFEA.16FAD Crucial - BLE8G4D26AFEA.16FAD 8GB 288pin DIMM DDR4 - Memory Module (compuram.biz) , BLE8G4D26AFEA.16FAD Crucial Gaming Memory (memory4less.com) , a while ago it...

Hello, All of a sudden today, my PC got a message on startup saying "The PCIEX16" link speed has been modified to Gen3". I switched that setting to "auto" and it started up normally. But I noticed right on the main BIOS screen that XMP was disabled, checked online and it looked like it was...

I am struggling to enable xmp on my system, I have corsairs LPX vengeance 4 sticks of 16gb DDR4, rated for 3200 mhz, but it is set at 2133 mhz currently, When I try to enable XMP in BIOS and restart my pc It does not apply XMP and resets the RAM back to 2133, I do not know anything about XMP so...

I have a newly built PC with DDR5 RAM and today I tried to enable XMP for the first time. Booting to Windows hasn't resulted in any issues so far. First pass of Memtest86+ was ok, but the second pass resulted in 4 errors. I'm not an OC expert at all, so I could use some direction as to what I...

Hey hey people, I've seen a bunch of threads considering problems with enabling XMP profiles, but none that are similar to mine. As the title says, as soon as I enable the only XMP-profile provided by my RAM the time to post increases considerably. It goes from 2-3 seconds to 30-40 seconds...

Hello good folks! I've got a pretty dated/budget setup, so I figured I wanna squeeze out every drop of performance I can lol :sol: Currently rocking: Ryzen 5 3600 X570 Aorus Elite RTX 3060 Elite 12GB Some fairly inexpensive G.Skill Aegis DDR4 3200MHz 4x8GB. The above mentioned RAM sticks run...

I created my pc around 3 years ago and everything worked fine until I decided to use the automatic XMP profile in the BIOS around a month ago. It worked well for a couple of weeks but eventually, the ram went bad and memtest86 results showed errors. I purchased new ram and followed the...

Hi all I have been trying to research this topic for some days now but I feel like the information I get is very conflicting. I am looking at some DDR5 5600 MHz RAM for a motherboard that supports up to 5600 and higher. However, the CPU (i5 13400) according to Intels page only supports up to...

For a couple of weeks now when I wake up my PC is frozen. I have alarms set in a website and those do not go off. this happens every single night. sometimes i can see the windows with some errors and can click around but slowly the computer becomes unusable. after a reset, it is fine for the...

Hi all, I have just upgraded my computer with 2 new memory modules. They are the same as the 2 first I already had : Kingston Fury Beast DDR5 5200 2x16GB. So I have now 64 GB on my mother board ASRock Z690 PG Velocita. Before the upgrade, in the BIOS, the only parameter that was manually set...