XMP

Hey hey people, I've seen a bunch of threads considering problems with enabling XMP profiles, but none that are similar to mine. As the title says, as soon as I enable the only XMP-profile provided by my RAM the time to post increases considerably. It goes from 2-3 seconds to 30-40 seconds...

Hello good folks! I've got a pretty dated/budget setup, so I figured I wanna squeeze out every drop of performance I can lol :sol: Currently rocking: Ryzen 5 3600 X570 Aorus Elite RTX 3060 Elite 12GB Some fairly inexpensive G.Skill Aegis DDR4 3200MHz 4x8GB. The above mentioned RAM sticks run...

I created my pc around 3 years ago and everything worked fine until I decided to use the automatic XMP profile in the BIOS around a month ago. It worked well for a couple of weeks but eventually, the ram went bad and memtest86 results showed errors. I purchased new ram and followed the...

Hi all I have been trying to research this topic for some days now but I feel like the information I get is very conflicting. I am looking at some DDR5 5600 MHz RAM for a motherboard that supports up to 5600 and higher. However, the CPU (i5 13400) according to Intels page only supports up to...

For a couple of weeks now when I wake up my PC is frozen. I have alarms set in a website and those do not go off. this happens every single night. sometimes i can see the windows with some errors and can click around but slowly the computer becomes unusable. after a reset, it is fine for the...

Hi all, I have just upgraded my computer with 2 new memory modules. They are the same as the 2 first I already had : Kingston Fury Beast DDR5 5200 2x16GB. So I have now 64 GB on my mother board ASRock Z690 PG Velocita. Before the upgrade, in the BIOS, the only parameter that was manually set...

Hi guys, due to some BSOD problems detailed in this thread I've just updated the BIOS for my motherboard, which is the MSI PRO Z690-A DDR4. I didn't realize that doing so would reset all my BIOS settings, until I noticed that my frame rate in games dropped by as much as 30 fps in some scenes...

Hello, Recently i have been getting lots of problems which indicates points to my RAM (i suspect) So recently i have been getting corrupt game downloads which i fixed by turning off XMP. But i wanted to know why it caused it. So i did a test with XMP on using memtest86 and it gave me a bunch of...

So I had 16gb C16 ram, butI've finally managed to find a kit for cheap (25 bucks!), the only problem being the timing difference. My kit is c15 3000 and the new one is c16 3000. CPU R5 3600 MOBO MSI b450m pro-vdh max On the first attempt (C15 plugged in 2+4, C16 plugged in 1+3) the PC did not...

can anyone really explain how the XMP option in the BIOS is related to memory overclocking? my motherboard (https://www.msi.com/Motherboard/B550-GAMING-GEN3 ) is said to support until 4400 mhz ocs but my sticks are 3200mhz will i be able to reach at least 4000mhz? they are hyperx fury standard...

Hello, recently a strange thing happened to my system. I have an MSI B550 Tomahawk with the latest BIOS, 4x8 GB G.Skill Aegis DDR4 3000MHz F4-3000C16D and a Ryzen 5 5600x. I got the mobo in July, I put it together and enabled the XMP, it worked fine with 3000 MHz until now when just out of the...

Hi, I've recently upgraded my ram, and after enabling XMP at 3600 MHz, my pc crashes or games crashes after 5-20 min. My main specs are the following: CPU: AMD Ryzen 5 5600x 4.4 GHz GPU: Zotac RTX 3060ti RAM: Corsair Vengeance LPX 16GB (2 X 8GB) DDR4 3600 MHz Motherboard: Gigabyte Aorus...

Heyo, since yesterday I've been dealing with an unholy amount of issues with my computer. But long story short, I started having blue screens with various codes that I managed to catch: Kernel Security check failure / System Service Exception With the help of Event Viewer and observation, I was...

Hi All, I'd like to ask for your advice regarding my issue detailed below. My specs are the following: AMD Ryzen 5 5600x RX 6750 XT ASUS B450 Plus-II mobo G. Skill Aegis DDR4 2x8GB 3200 Mhz 1TB SSD (Samsung) Seasonic GX 650 Gold PSU At first, the RAM sticks were set at default 2133 Mhz...

Hi all, I'm having some trouble with two kits of 2 x 8GB G skill f4-3200c16d-8gtzr. As far as I can tell they're identical, minus the fact one set was produced in 2017 and the other in 2021. This problem only seems to have cropped up after a motherboard replacement but I can't be 100% on that...

I recently finished building a PC with an MSI Z690-A DDR5 (non-wifi) MOBO and installed 4 sticks of Corsair Vengeance 5600mhz DDR5 CL36 (64 GB total, CMK32GX5M2B5600C36) MSI states that it is compatible up to speeds of 6400mhz DDR5 when overclocked. So I enabled XMP for 5600, and my PC got...

Hi guys, I would like to get some help. I have a gskill 2x8gb that works fine with xmp profile at 1866mhz. Now I got a 2x4gb kit Hyperx fury that works out of the box at 1866mhz but doesnt have xmp support. Now when i have all the 24gb instaled it gets 1333mhz because the hyperx deletes the xmp...

Hello! I've built my new dream PC, but I can't get to stabilize: CPU = Intel i7 12700k MB = MSI MPG Z690 CARBON WIFI RAM = Corsair VENGEANCE DDR5 64GB (2x32GB) DDR5 5200 (PC5-41600) C40 1.25V - CMK64GX5M2B5200C40 PSU = Thermaltake Toughpower GF3-1200W Bios = updated to the latest ver. Games...

Hello guys, I'm back again with another issue where my pc bsods if i turn xmp on. My ram is rated for 3200 mhz (T-Force Tuf gaming rgb 8x16) but I get bsods when i use xmp (not when i downclock it to 2933). I didn't have problems before so I dont know why im experiencing this now. Hope you...

Can't run my ram at a frequency beyond 3600 Mhz even though it is supposed to run at 4400 Mhz. I tried using the D.O.C.P profile, changing the frequency while leaving CAS and voltage the same as the D.O.C.P profile. 3600 Mhz seems to be the highest I can run. I am running the two sticks in slots...

I have my CPU overclocked to 4.8Ghz and my 32GB of ram overclocked to 3200Mhz. I can restart my computer fine and run my computer fine. My computer passes all Prime95 tests. If I shut down my computer and try to start it back up(cold boot) it won't post. The motherboard will light up but none of...

Hi, I'm new to this forum so I don't know if it's right to post so quickly but I don't know where else to ask. This is my Pc: -Windows 10 -Motherboard Gigabyte Z590 UD (no wifi version) (2666Mhz Max on 10th gen - 5000+Mhz 11th gen). -I5 10400 (I know this Cpu is not the best choice for this...

My system is an i7-9700k, 3080ti, (just installed) Corsair Vengeance RGB RS 3600 Mhz (part no CMG32GX4M2D3600C18, 32gb) and a Gigabyte Z390 UD rev 1 with a new Corsair RM850x. System is stable running at 2133Mhz with XMP disabled, but I paid good money for the RAM and want to use all its...

Hy Guys! (CSGO) I have a very old problem. When I got this computer, I had a TV monitor, and I thought that was why the game was not smooth. Ok, I bought a 144hz monitor, when I first turned it on and played, it was so smooth for a while (1-2 hours) It stays like that, and since I bought it...

Hello Just finished my first build and and just remembered that I need to enable XMP. But from two presented profiles it won't boot. Specs: CPU: i5-12600k MB: GYGABYTE z690 AORUS ELITE DDR4 RAM: Kingston Fury DDR4-4800 2x8GB

Just built my new PC the main specs to know are: Corsair vengeance rgb pro DDR5 2X16 CL3 with SKU: CMH32GXM2B5600C36 ROG STRIX B660-A motherboard link: https://rog.asus.com/motherboards/rog-strix/rog-strix-b660-a-gaming-wifi-model/ and an I7-13700k My problem is that when choosing XMP 1 or XMP...

Specs: CPU: i7-7700k @ 4.20 GHz (Turbo boost: 4.5GHz) [delidded] Mobo: Asus Maximus IX Extreme GPU: Gigabyte - GTX 1080 Ti Waterforce WB Xtreme Edition 11G RAM: 32GB - G.Skill - Trident Z RGB - DDR4 3600Mhz - 32GB (8GBx4) - 16-16-16-36 PSU: Seasonic - PRIME 850 W Titanium Custom Cooling system...

Using Gigabyte AORUS 8*4 = 32GB 3200MHz RAM. When I enable X.M.P profile, I get a blue screen with the error code 0xc0000221/0xc0000428. It works fine when using just 2 RAM but gets errors when using 3/4 RAM. What to do now? MB: Gigabyte B450M AORUS Elite. CPU: Ryzen 5 3600. RAM: Gigabyte AORUS...

Hello, everyone. I just finished building my new system. I am using an Asus Z790 Prime-A motherboard, 13900k CPU, and 64GB of Corsair DDR5 memory (dual channel kit of two 32GB dimms; model CMT64GX5M2B5600C40)). The latest bios are installed. When I entered bios for the first time, the RAM...

Hello! I've recently built my second ever computer and have been having anxiety about if my RAM will cause system instability. In my last build two years ago, I had paired a Ryzen 7 2700X with 2 X 8GB of G.Skill Ripjaws V 3600mhz CL16. At the time, I was unaware that the processor was not well...

So I had Two Gskill Ripjaws CL 19-19-19 46 1.2v DDR4 2666 MHz 8GX1 DIMM, (16 GB) With my MSI H310 M M2 Pro Motherboard running at 2666 MHz. However, I had upgraded to a Gskill Ripjaws CL 16-18-18-38 1.35v DDR4 3200 MHz 16GX1 & a Corsair Vengeance CL 16-18-18-38 1.35v DDR4 3200 MHz 16GX1, (32 GB)...

Hi guys, Specs: 12900ks Asus Maximus Z690 Hero (thermalright contact frame) 64 gigs T-Force Delta 6200 Custom Loop Gigabyte RTX 3080Ti Gaming OC Corsair HX1000i Today I received my second kit of T-Force Delta 6200 DDR5 32 gig (2 sticks) and after installing them I was immediately getting bsods...

Hi, I have an ASROCK B660m STEEL LEGEND with a i7-12700k and have been unable to use XMP to any extent. I've tried 2 different DIMM kits, one being a 4x8GB G.Skill 4000Mhz CL15, and the 2nd being a 2 x 16GB G.Skill 3600Mhz CL14 kit. Neither have worked at their spec on their XMP profile, it...

Hello, I wanted to sell my used motherboard. I had a few questions that I wanted to ask before doing so. So with my current setup, the xmp option will not work. The computer crashes after turning it on. I have found work around a with this by manually setting the clock speed for my memory. I...

I just built my first computer and when I enable XMP I get the “system posted in safe mode” message and it takes me to bios everytime I try to boot. I disable XMP and it boots no problems. ASUS PRIME Z690-P WIFI D5 EVGA GeForce RTX 3080 WD Black 2TB SSD Corsair Vengeance D5 2x16 5600

Hello everyone, i am here to ask a question regarding my MB and if i should update my BIOS version or not. Here's a little context for you. I've finally got my own PC last year (2021) around January-February and succesfully assembled all the parts in my case, and since then i've been running...

Hi everyone! I'm facing quite a bizarre issue with an Intel 11th gen platform I've build some time ago for my dad. The build initially consisted of: Intel Core i5 11600k CPU (no OC so far - all settings are left stock) Gigabyte Z590 UD AC Motherboard Crucial 16GB (2x8GB) 3000MHz CL15 Ballistix...

Hey everyone. So yesterday I decided to upgrade my pc from a B550 Tomahawk and Ryzen 7 3800XT to an 11700k and Asus Prime Z590-P. (Motherboard is free on Microcenter with the CPU purchase). However, once I installed windows again and went back to my BIOS to turn on my XMP to get the full speed...

In an CPUz bench I noticed that my ram speeds were far slower than they should be here is what it said btw... Frequency 1796.4 MHz (DDR4-3592) - Ratio 3:54 Slot #1 Module G.Skill 8192 MB (DDR4-2133) - XMP 2.0 - P/N: F4-3600C18-8GTZRX Slot #2 Module G.Skill 8192 MB (DDR4-2133) - XMP 2.0 - P/N...

Hey everyone, I posted about wanting to get my computers RAM running at as close to as full advertised frequency as possible a while ago. And after asking around I learned about XMP profiles which I had not been using before. I could only get my system to be stable at 2800MHz but I would still...