Question "No signal" after installing GPU drivers

[Kemeky]

Every time I install GPU drivers on my 2060 for my new build, the screen goes black right after it installs and says "no signal" the only way to fix it is to boot into safe mode and uninstall the drivers. I have a Ryzen 5 2600x so I can't use integrated graphics to try and fix it either.
I reset CMOS, reinstalled windows, and used DDU to try and fix it but nothing worked. How can I fix it?

 

[COLGeek]

What is the make/model of your power supply (PSU)? Also, do you have the AMD chipset drivers (for the motherboard) installed? What GPU were you using before installing the 2060?

Grafikkarten und Notebooks der GeForce RTX 20er-Serie

Echtzeit-Raytracing, KI-gestütztes DLSS 2.0 und programmierbares Shading.

www.nvidia.com

https://www.amd.com/en/support/chipsets/amd-socket-am4/x470

 

[nick_v15]

Do you have the latest bios?

 

[Kemeky]

What is the make/model of your power supply (PSU)? Also, do you have the AMD chipset drivers (for the motherboard) installed? What GPU were you using before installing the 2060?

Grafikkarten und Notebooks der GeForce RTX 20er-Serie

Echtzeit-Raytracing, KI-gestütztes DLSS 2.0 und programmierbares Shading.

www.nvidia.com

https://www.amd.com/en/support/chipsets/amd-socket-am4/x470

Do you have the latest bios?

So actually, it turns out it was due to displayport, I'm not using an HDMI although its only 60hz. How can I make it so displayport actually works? Every time i switch to displayport it says "No Signal" and goes back to HDMI.

 

[nick_v15]

So actually, it turns out it was due to displayport, I'm not using an HDMI although its only 60hz. How can I make it so displayport actually works? Every time i switch to displayport it says "No Signal" and goes back to HDMI.

This doesnt make any sense..RTX is very recent release.Make sure you have the latest chipset drivers and bios.

 

[Kemeky]

This doesnt make any sense..RTX is very recent release.Make sure you have the latest chipset drivers and bios.

Yeah I updated both of them already. My displayport stopped working when I installed the drivers but not HDMI, which makes no sense and I have no clue how to fix it as of yet.

 

[COLGeek]

Try an alternate DisplayPort cable or even port on the RTX 2060, if available. On your monitor, can you switch manually to the DisplayPort?

 

[Kemeky]

Try an alternate DisplayPort cable or even port on the RTX 2060, if available. On your monitor, can you switch manually to the DisplayPort?

I don't have another displayport cable, I changed ports and still the same thing, and yes when I manually switch to DisplayPort after a couple seconds it says "No Signal" and goes back to HDMI.

 

[nick_v15]

Displayport 1.2 black screen

I just got my displayport cord for my r9 fury and i went to hook it up to my freesync supported viewsonic moniter. i clicked enable displayport 1.2 in the moniter settings and i got a black screen. i clicked back to hdmi input on the moniter and noticed in crimson live that its picking it up as...

forums.tomshardware.com

 

[Kemeky]

Displayport 1.2 black screen

I just got my displayport cord for my r9 fury and i went to hook it up to my freesync supported viewsonic moniter. i clicked enable displayport 1.2 in the moniter settings and i got a black screen. i clicked back to hdmi input on the moniter and noticed in crimson live that its picking it up as...

forums.tomshardware.com

That didn't work since it doesn't show 2 monitors for me, only 1 and that's my only one.

 

[nick_v15]

Seems that you are not the only one having this prob...https://forums.evga.com/2080ti-Black-Displayport-not-working-m2895372-p2.aspx

 

[nick_v15]

I would like to know if anything worked for you.

 

[Kemeky]

I would like to know if anything worked for you.

Nope, I tried that earlier when I didn't know the HDMI cable worked. So that won't work for me.

 

[Kemeky]

I installed GPU drivers on my newly built PC, I have a 650 W EVGA Supernova G3 and a MSI Gaming RTX 2060. The moment I install GPU drivers my displayport says "no signal" in all 3 ports on my GPU. I have to go into safe mode and uninstall it to be able to see anything using displayport. My HDMI works after the drivers are installed but not my displayport.

I've cleared CMOS, reinstalled using DDU, and reinstalled windows, and I have a displayport 1.4 cable coming in to see if that's the issue. Any other suggestions? I'm stumped.

 

[nick_v15]

......Just for the sake of it.Unplug your monitor from power for about 10 secs and plug it back in.Also search if theres an input option in your monitor menu.