Im looking to buy a new motherboard for my pc, but im not sure if i would like to upgrade my cpu right now as i dont really have any issue when playing games at 1080p 60 fps
Any suggestions are appreciated
Thanks
I've been doing some video editing with Cyberlink PowerDirector. On task manager the cpu is really maxing out a lot. The ram i think sits steadily at 50% or less. And my gpu sits at probably 20% or less. I couldn't find online whether upgrading my ram would help even though it looks like its...
Sorry if it's a silly question, I'm pretty newbie with computers. On the manufacture's site from MSI it's mentioned that these are the RAM speeds the motherboard can run on:
For AMD Ryzen Gen3 (R5/R7/R9)
2667/ 2800/ 2933/ 3000/ 3066/ 3200/ 3466/ 4000/ 4133 MHz (by A-XMP OC MODE)
For AMD Other...
Hello everyone.
After activating SAM (Smart Access Memory) on my RTX 3070 video card and Ryzen 5 3600 system and running the system, the screenshot goes away after Windows runs for a while. After turning off SAM, there is no problem, Windows continues to work. The same goes for the resizable...
Hi,
I have always thought that different frequency rams would always run at the lowest ram's frequency i.e. having a D3600 and D3200, all ram would run at 3200.
My CPU-Z pictures above seem to contradict this idea. See columns XMP-3200 and XMP 3596 (1600MHz is for 3200, and 1798 MHz is for...
I need a ram for my pc.
the question is what to select high freq or Low Latency?
XPG D50G 16GB (2X8) 3600 CL18
1,850.00 EGP
or
XPG D50G 16GB (2X8) 3200 CL16
1,650.00 EGP
Hi, I just recently bought a 3070ti and it generates A LOT more heat than my previous gpu. Because of this, my cpu is now starting to get really hot in some more demanding games. I've seen it go up to 95 and even 100C with the panels closed and up to 90C with the side panel open. I was told that...
Hello guys!!
Thank you in advance to help me with this. I have this PC and I would like to upgrade my Ryzen 1600 because I think it's old for the current gaming requirements:
GPU: GTX 1070 Founders Edition PNY
16GB Corsair Led 3200MHz
ASrock AB350 Pro4
PSU Corsair M600w
Case NZXT Phantom 410...
Hello Tom's hardware
I have now, after a few years decided to upgrade the ram on my pc. This is mainly due to the newer games I am interested in require minimum 16gb of ram.
With my current setup I have 16 gb of ram. It will highly likely in the future be an issue for me playing my enjoyable...
Hey guys, I just recently upgraded a few components in my PC, at first just the CPU/Mobo. Everything was fine in the initial Windows install with my 4x8GB Corsair Vengeance 3000MHz (XMP 1.0). Then my new RAM came in (Trident Z 2x16GB 3600MHz XMP2.0) which I installed... I had black screens, blue...
I have just bought my new 3080. I run the test in division 2 but I found that the result was not satisfied and the result of the 3D mark fire strike was also not satisfied because it was much lower than the average result.
Result of Fire Strike: http://www.3dmark.com/fs/26124273
This is my...
I have 2 options here :
GAMMAXX 400 pro For 43 USD
Cooler Master MasterLiquid ML240L? 120 USD
whats your recommendation, and how much the temp should be when it heavy for gaming ?
note: I'm not thinking to overclock it.
Ryzen 3600 running mid 60s Celsius while idle, 80s when gaming. Running an MSI MAG Coreliquid 240R with 2 fans, and 4 more case fans. I've tried changing bios settings, as well as removing and re-installing my CPU cooler and CPU. I built this PC less than a year ago and I'm not sure what the...
I am at a total loss. I built my PC less than a year ago and a couple weeks ago, it starting performing very poorly and restarting every minute or so. Eventually I got a BSOD. Error code was Critical System Failure I believe. After trying system restore and startup repair, nothing worked. I kept...
I'm thinking to upgrade my CPU from R5 3600 to 5600X, But I have an old Motherboard from 1st Ryzen Generation.
The mobo is updated to latest update and I think it's capable to run 5600x but what about the performance of the cpu ? Do I really to upgrade the mobo or stay with it
My Mobo Is: MSI...
My Ryzen 3600XT's temps are around 60C and 80C-90C when playing a CPU intensive game. Im rocking the stock cooler because I originally didnt want to overclock it, thought it would have been enough.
My friend also has the same setup, and he's getting like 70C, same game, same settings. I find...
Hi ,
Im planning to buy the MSI MPG X570 GAMING PLUS mobo . I will also use the ryzen 3600 cpu with it and a Samsung 970 EVO NVMe SSD 500GB . But my concern is i noticed on the msi website in its combability section its says nothing about supporting ryzen 3rd gen cpus with M2 PCIe 3.0 x4...
Hi all,
I just built my first PC, I'm a complete beginner at this. I have an AMD 3 3200G processor, an ASRock B550M Pro4 motherboard, and have TridentZ Neo DDR4-3600 (8GBx2) sticks installed in my A2 and B2 slots (which I'm told is correct).
Problem is, when I run BIOS, my memory shows up as...
Hello everyone, I am a RX 6800 XT Sapphire Nitro+ user.
So I RX 6800 XT to replace my 5700 XT. CPU is a 3600. I have run DDU in safe mode, even reinstall the window.
Framerates are not performing well. I found that a youtube channel, Hardware Unboxed, had around 100 fps when they are using 6800...
Budget (including currency): 28000 INR // 380 USD (Ryzen Build ONLY)
Country: India
Games, programs or workloads that it will be used for: Adobe Premiere Pro, DaVinci Resolve, AE and Audition on some level.
Other details (existing parts lists, whether any peripherals are needed, what...
Need to know whether to upgrade from 2933mhz to 3600mhz. Do you think it would be a smart idea to upgrade to 3600mhz for future gaming in 5 years or so? Or do you not think this would make a difference. I am using an Intel processor.
While I'm playing BF5 my GPU usage is always up to 62-63% in online. It never goes up. So it my CPU must be bottlenecking my RTX 2060 but I have checked for lots of bf5 tests for any kişnd of bottlenecks I have never seen a situation like that. It might be bottlenecking on those tests but not...
I'm trying to make my PC quieter by adjusting my fan curves but I have turned off every fan and im still hearing the humm of a pretty loud fan (like louder than all the other fans put together)
I have installed MSI dragon center to tweak the fan curves since it is easier than in the BIOS and...
Recently, I decided to upgrade my CPU from AMD FX-8350 to Ryzen 5 3600.
Alongside with it, came new RAMs and motherboard ofcourse.
I went for MSI X470 Gaming plux max.
The old one was Gigabyte GA-970A-DS3P FX
The thing is, my download speed is slower then with gigabyte board while using the...
I recently boughtba 5900x , crosshair viii hero . My question is will trident royal z silver 4x8 gig sticks quad chan cl14 15 15 1.45v work on this motherboard or do i need to exchange it for dual chan and run 2x8 sticks times 2 for it to work? My kit number is F4-3600c14q-32gtrsb
Is the RAM below a good candidate for overclocking? I'm not sure I understand b-die and e-die - just learning:
G.SKILL Trident Z Neo (For AMD Ryzen) Series 32GB (2 x 16GB) 288-Pin RGB DDR4 SDRAM DDR4 3600 (PC4 28800) Desktop Memory Model F4-3600C16D-32GTZNC
DDR4 3600 (PC4 28800)
Timing...
I upgraded from a Ryzen 5 3600 to the new 5600X today. I was running 4x8GB DDR4 RAM. With the 3600 and it worked fine, dual channel/32GB and all. With 5600X it only allows me to put RAM in the first two slots (A1/A2). I did test all four sticks in (A1/A2) and they work perfectly. No matter what...
Long story short, my Tuf x570 gaming plus WIFI boots to a black screen. The motherboard lights flash on the graphics card step, my 5700xt graphics card connected to my pci4.0 lane. The computer eventually boots, but only after clearing the bios entirely.
Things I have tried and ruled out...
Hey, everyone. I have an irritating problem with my ryzen 5 3600 build. Almost all of my games stutter and freeze but if I reinstall my ram modules it works fine for a couple of days, and then the stutter comes back. It's so weird, I tried 2 different RAM kits (placed in A2; B2 slots ofc) like...
So I was looking forward to getting the 5600X for $299 USD ($420 AUD) But it ended being $470 AUD (IDK why but it is)
I was kind of disappointed and looked at benchmarks at 1080p and found that the 3600 loses about 9fps to the 5600X with a RTX 2080ti meanwhile I'll be getting the RTX 3060TI...
AMD 3600/ 16gb of Corsair vengeance/ MSI B550 GAMING PLUS/ RTX 2060 SUPER
PART 1
Ok so I built this computer today and it was going great, I updated windows in till it said there are no more updates I updated the bios and the chipset all the things, Later tonight I go to get on and use it a...
Hi guys,
I have a Ryzen 3600. I recently fitted a new AIO cooler as temps were too high for my liking with the stock cooler. Since changing the cooler and no bios or power plan changes, the CPU won’t boost past 3950MHz.
Any ideas?
Hi everyone,
So after 6 years of steady duty by my previous build, it feels like high time for some upgrades. Or you know what, let's just do a new build ;)
I am however looking to use some old components as well, but I'll get into that later. Any advice on this build would be much...
Hi guys,
I'm going to be building my first PC for my brother. This will primarily be used for gaming on common titles such as COD: Warzone, Fortnite and Rust etc. I have based the parts on my own research whilst trying to "future proof" on a £700-800 budget. I understand this is a low-mid tier...
Let me start off with my build:
Mobo: MSI B550M pro-vdh wifi
CPU: Ryzen 5 3600
GPU: MSI GTX 1660 SUPER VENTUS XS 6G OC
RAM: HyperX Fury 16GB 3200MHz DDR4 CL15 2x8gb
PSU: Corsair CX Series 550 Watt
Everything brand new.
I started off by having issues installing Windows 10 right from the get...
Hi there,
I have a B450M Steel Legends with the 2.90 BIOS.
When using my 2600, my temps are good and everything works.
However, when I install my new 3600, my temps are very high 45 - 50 at idle, and around 82C in Cinebench. I have tried two different 3600 CPUs, applied the required thermal...
i want do upgrade cz my cpu is running hot. i have 4 case fan. 2 front, 1 top, 1 rear(exhaust). my 3600 is running 70 at normal load. 60s at idle. with 3.9-4.1 ghz.
should i go for the prism or something else ???