Hi all
I'm looking to get a case to replace my Fractal Design R4.
Nothing wrong with it, had it for 10 years almost so looking for a change.
My top contender is Hyte Y40 at the moment but it could easily change while I'm researching.
My requirements are as follows:
Glass panel/panoramic...
Hello folks, I am looing for the best cooling solution for my i9 13900KF. The current case I have got is a Fractal Design Torrent Mid Tower, so I am looking for the cooling to fit that case. Thank you in advanced for any suggestions and help.
Hello, so I'm considering upgrading my several-years-old PC.
What I have:
What I may buy:
Are the components fully compatible? What issues may I have? Is the upgrade good overall (don't pay attention to the GPU - it will get its upgrade sometime too)?
And what concerns me is that Zen 4...
I got a Fractal Design - Define 7 XL. In it there's a Nexus+ 2 Fan Hub. It supports 3x 4-pin PWM.
Problem is I got 4x PWM fans (Noctua NF-A14) 140mm
3x Front Intake
1x Exhaust
I intend to have the exhaust plugged in the hub. Leaving 2x PWM left on the hub.
So I was thinking plugging 2 front...
Hello
I'm thinking of getting a Fractal Design Define 7 XL. I want to know if anyone has one with the PSU facing up? As in the fans are not looking down towards the ground. I know there are holes on the PSU shroud, but just want to be sure...
I have a fractal design define mini case with a max CPU cooler height of 160mm. There's padding on the side panel that covers a fan slot and adds about 1/4 inch of thickness but I don't want to have to remove (see pic). The bequiet website states that the heatsink is 135mm "without mounting...
What is the best Air flow setup for a Fractal Design Meshify 2, I am planning of buying a NH-D15 and 9 Noctua NF-P12 as case fans, I have never really cared/looked into air flow, so I dont really know anything about it, or does it even matter that much?
Hello!
I'd like to start by thanking anyone who is able to help me with this, I really appreciate it.
So, I recently purchased new PC parts. I previously had an SG13 small form factor setup that worked great for me, but I wanted a case with a little more breathing room. Thus, I chose the...
Hello!
I've got to switch to a new case and would kindly ask for some advice.
my build currently:
AMD 3700X
Gigabyte Aorus X570 Pro
GTX 1070 (to be replaced probably next year if prices return to reasonable levels)
3 3.5" HDDs
3 2.5" SSDs
420mm radiator (45mm thick) & a 1 D5-pump with a 150mm...
Good Day all!
Can someone help me to figure out how to get replacement cables for my PSU?
I have lost all the modular cables for my "Fractal Design Newton R3" model: NT3B
I know that I cant just get any old modular cables as some are wired differently and could cause serious problems.
Ebay...
Hello, I have a build right now in some cooler master case, and well it’s kind of loud. I am very new to this whole computer stuff as I’ve always had a Xbox. I have an Amd 5700xt and a ryzen 7 3700x. I am looking for a case that will cut sound down drastically but still doing good with cooling...
Hi guys, ok so im about to start ordering for my new build but need to know what i can do to be able to use the 2 front usb ports. The case i want is the fractal design meshify C and the motherboard is MSI b550 A pro. Issue is the case front usb ports are 3.0 and the motherboard is usb 3.2. Can...
I bought a used power supply which in hindsight i should've asked more details before i bought it. Anyways to the problem, Bought the power supply for 40€ and got it a couple days ago, completely filled with dust, absolutely filthy. Of course I was disappointed that the seller didn't disclose...
DIY - Fractal Design R4 - missing leg solutions?
I bought today a Fractal Design R4 at a very cheap price so couldn't bypass that mega bargain.
However it's missing one of its rubber feet.
Can anyone recommend what can I use to substitute it?
I've looked into buying a replacement but can't seem...
I recently built a new PC using a Fractal Design Define 7 Compact case. The case is really good, and comes with dust filters in the front, top, and bottom, but for some reason there are no dust filters in the back. My previous PC case didn't have any dust filters except at the front, and the...
One of the case fans on my Fractal Design Define S2 Vision RGB recently stopped spinning. The rgb works but it doesn't spin. I took the case apart and if I manually spin it with my hand it's much more rigid than the other fans. The other fans keep spinning and this one just stops immediately...
I wanted to know how much better the Meshify S2's airflow was over the Define S2. Is it worth the extra cost and (in my opinion) worse looks? How much better would a top mounted radiator do with the mesh top panel over the solid one?
Hi guys,
I'm looking to build a PC that is as close to Silent as it can
get with fans. And in this thread i want to focus on The Case and on Case fans (understanding that other components are and important factor)
I'm actually building a photo and semi gaming editing machine.
What medium sized...
Hey,
I have a fractal design Celsius S36 cooling my i7 8086k. The thing is, the CPU gets extremely hot sometimes. In winter, when in a cool room, it goes up to about 97C. This was when overclocked to 5.1 GHz at 1.34V. When I tested it with default settings back then the CPU got up to 93C after...
I plan on building a new computer with an 8700k which i would need an aio to cool in the Meshify C. I also have selected the Trident Z RGB ram sticks which stand at 44mm high. I just read that for a top radiator the ram or other mobo components must not exceed 40mm. Do you know if i will be able...
A consolidated list of Desktop PSU/SMPS (Power Supply Units/Switch-Mode Power Supplies) for comparison of different brands and models (the link to the list below opens to a shared Google Spreadsheet, no sign-in is required):
Link: POWER SUPPLY UNIT COMPARISON TABLE - A Sortable Database of...
Hello, I had a few questions about this build I am going to do. It involves the Meshify C and I want to make sure that everything is ok. https://pcpartpicker.com/list/M6gkQZ I already have my graphics card and im pretty sure there is enough clearance if I want to front mount my radiator. What...
So I want to buy a new PC case, M-ATX form factor(except one), I managed to narrow down the suspects(lol) to 11:
Cooler Master Masterbox Lite 3.1
Cooler Master Masterbox Q300L
Cooler Master Mastercase Pro 3
Cooler Master N200
Cooler Master Silencio 352
Corsair Carbide 88R
Thermaltake Versa H15...
Hey guys!
My signature specs are up to date, please lead me through on how to safely overclock my CPU & RAM without the need to do stability testing... So in other words a overclock that isnt pushing it to its limits, but is better than the stock. I am using stock cooler for the Ryzen cpu.
Ive been streaming a lot lately and I wanted to upgrade my set up to get a better performance for myself and my viewers. I've compared the GTX 1660 Ti and RTX 2060, in which the RTX excels. I'm currently using a GTX 960 and would like to hear opinions on which one would be more beneficial to get...
Hi everyone, I recently bought a dell Optiplex 990 DT and decided to install my GTX 750 2 GB GDDR5 GPU and WD 2TB RED HDD from my old pc. The HDD worked perfectly but the GPU was acting very weird, when I'm not doing GPU intensive tasks like game dev or gaming the GPU is at 1-10% like it should...
Any USB storage device that I attach to my Windows 10 PC will constantly make the USB disconnected sound. If I'm using the storage devices when this error occurs, the entire PC freezes. Sometimes it recover, sometimes it does't. These same storage devices have NO ISSUES AT ALL on other PCs. I've...
I spent about 3 weeks looking at laptop prices until I decided the amount of performance per $ was absurd and I would be better served by building a PC with remote desktop access when I was travelling. I had always wanted to build my own computer but never had a reason to until now. A couple...
Hi ! I cant decide wich ram to go with;
G.Skill Ripjaws 2x8 3200mhz CL16-18-18-36 or
ASRock Team XPG Xcalibur 2x8 with same timings.
Price is similiar but im not sure wich brand is better and asrock has rgb aswell :P.....Please help
Processor: 5 2400g
Motherboard: b450 fatality
Gpu: 1070 8gb...
I have tested With another gpu and it boots fine so the problem is my rx 580 4gb
Why isn't it working all fans are spinning
i used it for 3 months then when i entered my games it started glitching and my pc crashed and restarted,the last time it crashed did not boot back up again pls help as im...
Which graphic card is best among GTX 980 and RX 580 4GB (RX 580 4G model is cheaper than GTX 980 4G)
Somebody says Nvidia graphics are more realistic than AMD RX graphics..Is it true ?
I am building my first gaming pc and really confused whether I would need more fans than that comes with cabinet(3 front 120 mm intake+ 1 rear 120 mm exhaust). Psu cooler would also be working as exhaust so do I need more fans or they would just be overkill with this build? I am thinking of...
Hi guys, so ive started building pc yesterday. So first i attached the CPU and the stock cooler that came with it and connected the pin to cpu fan. And the RAM attached too without problem. Then put that in my pc case and saw there were some ready 4 cables bound and 2 case fan cables that came...
Hello,
please help me choose one of the two :)
They cost about the same at me, not much difference.
1st:
Intel - Core i3-8100 3.6 GHz Quad-Core Processor
Gigabyte - B360M DS3H Micro ATX LGA1151 Motherboard
Kingston - FURY 8 GB (2 x 4 GB) DDR4-2400 Memory
Gigabyte - GeForce GTX 1050 Ti 4...
I'm about to upgrade my gtx 970 to a gtx 1070. The price range of this card is between approximately $300.00 to about $600.00. Can anyone tell me if there is a actual difference in the graphic cards or am I just paying extra for the brand name? Thanks in advance.
I have an Acer Predator Helios 300 :
intel core i5 8th gen 8300H
8 Gigs of RAM
Nvidia GeForce GTX 1050Ti 4GB
128 SSD + 1 TB HDD
The issue here is that even on low graphics games like watchdogs (2014) lags a lot when the adapter isn't plugged in and when the adapter is plugged in it doesn't...