memory

I have a fairly old pc, but it works for what I need it for and the few games I do play. I added 2x4GB of G Skills ram a few months ago. I wasn't aware for best compatibility; I should have ordered 4 sticks in one set. CPU-Z shows XMP 1.2 running on the newer pair of ram. However, in the older...

Hi, I have a Ryzen 5900x on a ROG Strix B550-F Gaming which can power RAM up to 5000mhz. Currently I am using a Corsair Ballistix 3600mhz cl16 kit which was the recommended when I bought them ages ago. I have found a very affordable Corsair Vengeance 4600mhz cl18 kit which is 400mhz u der the...

Hello TomsHardware Fans Longtime "reader" first time "chatting" I'm building a Clevo P870TM (a.k.a Sager NP9877, Eurocom SkyX9C) laptop with an i9-9900k Intel CPU. The CPU Memory specs are as follow: Max Memory Size (dependent on memory type) 128 GB Memory Types DDR4-2666 Max...

Had 2x4 2400 mhz rams and my mobo supports max 2400 mhz, wanted to upgrade rams to 16gigs, purchased crucial 3200 mhz CL22 dual channel kit thinking it would downclock and work at 2400 mhz like so many people said to me, but after installing new rams my laptop wont boot up, i can see rams in...

Hi, my system is currently runing two sticks of Corsair Vengeance RGP Pro 2x8 3200. (CMW16GX4M2C3200C16) I wanted to add two more ram sticks, with exactly the same sticks, because I heard that mixing isn't recommended. So I went to my buyers history and selected the exact same sticks and bought...

So, I have a Ryzen 5 1600AF (Zen+) processor and an MSI B450M PRO-VDH MAX motherboard. Before the upgrade, I had two Crucial green RAM sticks running at 2400 MHz, and I replaced them with G.Skill Ripjaws V 3200 (2x8GB) with 16 timings. I immediately enabled XMP in the BIOS, and everything...

Hello, i had 8x2 3200 mhz ram in my pc and i bought the same one again, after putting everything in it booted up and i got a blue screen. I went and restarted it and i got an infinite windows loading screen. I turned off the pc plugged everything out, pressed the power button to clear the...

Comparing 3060 Tis, I noticed that the best models aka ones where the manufacturer didn't cheap out on heatsink and fans like asus strix, msi gaming x etc , don't have GDDR6X, but rather GDDR6. Why is that? They already cost substantially more than the "normal" variants (instead of Strix 435€...

Hello, I tried searching but couldn't really get a clear answer. Unfortunately store is all sold out of the 128gb kits and my friend's bday is in a couple days. Can I use 2 sets of a 2 x 32gb kit if the CL stuff on the label match? Or should it be same brand as well (because there's only 1 in...

Hey everyone, So I built my new PC a couple weeks ago and I've had this issue happen twice; I press the power button on the case and it lights up and my RAM RGB lights up, but I get nothing else, no power supply click or any other RGB lights. Then I power it off by holding case power button...

I recently put together a system with the following components: Motherboard: ASUS TUF Gaming Z790-PLUS WiFi CPU: Intel I9-13900K GPU: Nvidia Quadro P4000 Memory: Kingston DDR5 KF552C40BBK2-64 (2x32) -- meets ASUS compatibility System is on a Crucial 1 TB M.2 SSD (in slot 2) with a 2TB Crucial...

I have a Apacer Panther DDR4 8gb 2400mhz ram stick on my H110-S2PH mobo. It's timing is 16-16-16-36(while on XMP2.0....The sticker on the ram also says it's 16-16-16-36) otherwise on default, it was on 17-17-17-39(xmp off). It's stock out right now and I have a budget. So I'll probably have...

Hello everyone, i owned corsair vengence 2x8gb 3200mhz cl 16 ramsticks, runnin xmp profile 1 at 3200 mhz getting dram freq. 1600 mhz. Now I bought 2 more exactly same ramsticks and add to my pc, im using MSI MPG z490 gaming edge wifi, which supports xmp profile 2 and my ramsticks. BUT , the...

Hello people, can someone help me picking memory for a CPU i7 6700K with ASUS ROG Maximus IX Code z270 motherboard. [ btw I currently have Kingston HyperX Fury 16GB (2 x 8GB), DDR4, 2133MHz, Non-ECC, CL14 ] Thanks.

Hello, wanted to ask if i should enable XMP. Just bought DDR4, 32GB, 3200MHz, CL16, Kit of 2 It's running at 2133MHz in task manager Specs: GIGABYTE H410M-H V3 Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz Here is CPU-Z screenshots if these help to answer.

I just bought more ram and I'm only running the 2 new sticks but my systems boots to safe mode when I raise the speed above 2666mhz. CPU 12th Gen Intel(R) Core(TM) i5-12600KF Motherboard ASUS Prime Z690-P WiFi D4 New ram G.SKILL Trident Z Neo Series 64GB (2 x 32GB) 288-Pin PC RAM DDR4 4000 Any...

Since the past weeks my pc is been constantly having memory issues when it didn't had them before. A month ago I could have over 100 tabs in Chrome open, watching videos or a streaming in the background, with Discord open in a call while playing resource heavy games without a single memory...

Specs: Windows 10 Home 64-bit 22H2 AMD Ryzen 7 2700X Micro-Star International Co. Ltd. B450 GAMING PRO CARBON AC (MS-7B85) (AM4) 2047MB NVIDIA GeForce GTX 1660 (Gigabyte) Corsair Vengeance RGB Pro (8 x 2GB, C16) CMW16GX4MXC3200C16 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---...

As you can see, my desktop is very slow. The PC sometimes feels slower than it should be in some programs, but usually it works fine and I can play games just fine. My specs are: Ryzen 5 5600x 3070Ti ASUS ROG STRIX b550-E wifi Corsair 2x8 3600mhz (ram is working at full speed I checked) Samsung...

Hello, my ram from you just arrived today. After I build it into my PC I noticed that my PC wasn't able to boot properly after raising the MHz in the Bios. I have been testing for the last 3 hours and the current results are that if I try to use 3600Mhz my PC gets stuck in bios. If i try...

Just noticed today that the DRAM Debug LED is glowing faintly, and by faintly I mean that its not the full brightness glow which happens when PC is at POST phase. Is this a dying LED or is something else wrong here? All my memory sticks are detected with proper XMP and dual channel and PC is...

Hello everyone I have a quick question. I am looking to upgrade my current Pc - Here are the specs - Device name DESKTOP Processor Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz 3.50 GHz Installed RAM 8.00 GB System type 64-bit operating system, x64-based processor Pen and touch No...

i just bought hp elitedesk 705 g5 with Ryzen 5 3400g and i read much about ram and the importance of dual channel for the APUs but still confused which is the best of these two options , 2133mhz with 15 clock latency or 2666 with 19 clock latency ? and another question , i planning to have...

Hello guys recently i have seen high memory usage on my pc . My memory usage was above 50-60 percent when nothing was opened . I've tried to downgrade my windows didn't help , updating drivers didn't help . I could not update bios because when i went to download the bios and install it it says...

So I bought 4stick of 8Gb rams (32gb in all) 3600MT/s cl17 21 21. Paired with i9 10900k and z490 Gaming Plus. They probably Microns, can't tell for sure as Taiphoon doesn't work in win11, but voltage for any heavier OC with Memory Try It, is 1.5V. I read that Microns doing that voltage with OC...

Hey there, I bought a ASUS Prime B450M-A II AM4 Micro-ATX Motherboard ASPB450MA2 in January 2023 (it is registered on their site and has a warranty) along with Patriot Viper Elite II DDR4 32GB * 4. [and other parts listed below] I started having issues with a linux install. Getting Kernal...

Hello follow members I have 2 corsair vengeance led ddr4 sticks of 8gb each.. c15 3000mhz CMU16GX4m2C3000C15R 15-17-17-35 i want to pair those 2 with 2 more corsair vengeance led ddr4 ... but their details are " CMU16GX4m2c3200c16R 16-18-18-36. will they work fine... or is it a bad...

Hello, My laptop is suffering a problem of high memory usage. It really makes the computer unusable and annoying so i need a fix. I've done a malware scan using Malwarebytes but it didnt help. Computer uses %90 RAM almost every time. Computer Specs: I5 7200U NVIDIA 940MX 12 GB RAM 480 GB SSD...

I have checked my ram latency on CPU-Z and i have gotten something like this: "JEDEC 8,9,10,11" "Frequency: 1066 on all JEDEC" Now my main question is What is my latency?? it shows "16.0,17.0,18.0,19.0" while ras to cas is all 15 my ram is crucial 4gbx2 2133MHZ DDR4, part number: CT4G4DFS8213.C8FDD2

Changed cpu from ryzen 3 2300x to ryzen 5 1600 af today and can't get ram on any speed other than default. worked perfectly on 3200mhz until I changed cpu, tried manually, tried with xmp but if I change anything it won't boot, it only boots when it resets settings.

I have 6400 ram and a board that can reach that speed but can't get any more than 3600 at default. XMP doesn't work and anytime I change something manually I get the same result. Can't post with the ram light and I forget the debug code. [redacted] Pls and Thx Motherboard Model Name: X670E...

Hello everyone, I''m currently in the process of changing out some older parts in my system to bring them up to date, one of these being my RAM. However the RAM i wish to buy im having trouble determining wheather its compatible with my MB i have done somew reaserach on this from MSI's and...

Hello everyone So I was just wondering around and realized windows is using 7/16gb of ram when idle! As a pretty routine user the first thing that I've done was to check task manager.... NOTHING, the numbers weren't adding up. Here "resource monitor" came in action and showed me a process I've...

When I bought this laptop (Lenovo Ideapad 320) it was equipped with built-in RAM with a speed of 2133MHz, after running for several years my RAM speed had dropped to 1066MHz and to be honest the decrease was really felt in the performance section. Then I finally decided to replace it with new...

Hy guys! I would like your help, because for some reason the game is not smooth(CSGO,CS1.6, and whatever fps) and I have a G-sync 240hz monitor, and I think something needs to be set in the bios, but I don't know, Windows was installed today. I attached the rest below. Thank you for the help...

Money constraints. That is why i just opted for a 32gb in the meantime so i can start on working. I do After Effects (video renders & editing, motion graphics, animation), Photoshop, graphic designs, some 3d modeling & sculpting. Recommended to me was to get a 64gb RAM for the creative work...

Hi!. Have purchased 2 new DDR 3 ram (8GB) modules. earlier i had 1no 8Gb module installed already. now as I insert the 2 new ram modules my WIN 7 is not identifying the older module. Whereas Cpu-Z is identifying all the ram sticks. Validation link to CPU-Z for my current system...

What do you think about system memory through the years? Lightly piquing and definitely worthwhile for a system in tune with the times, meaningful to the point of major cardinality in the past days of hardware and furthermore stretching too ahead and being ever an intriguing and effectually...

Hello everyone, I'm trying to build a PC and it seems to be impossible to find any kit of 32GB sticks above 5600MT/S I'm looking to get 7000MT/S or higher but I cannot seem to find any company that does this. The motherboard I have has 4 slots (It's an Asus Z790), it can take 128GB max but there...

I have a old MSI Xpower gaming AC X299 board (socket 2066) with a 7800x in it. It has 4 8gb sticks in quad channel in the correct slots. Recently I went and gave it a good cleaning and replaced the water cooler and all of a sudden the CPU wont access any dimms in A1-D1 (in fact c1 causes...