memory

Hello, everyone. I just finished building my new system. I am using an Asus Z790 Prime-A motherboard, 13900k CPU, and 64GB of Corsair DDR5 memory (dual channel kit of two 32GB dimms; model CMT64GX5M2B5600C40)). The latest bios are installed. When I entered bios for the first time, the RAM...

If I pick "32GB" at NewEgg, then it shows all the 16x2 stuffs. But I am specifically looking for 32GB RAM sticks because the maximum my motherboard can take is 128GB and it has 4 slots. So it needs to be 32GB stick. I want to get the best available 32GB RAM stick. How can I search specifically...

Hi I’ve been searching and searching but can’t decide which RAM is good for FPS gaming more so for Rainbow Six Siege. I’ll be getting a MSI PRO B660-A DDR4 ATX LGA1700 Motherboard as someone on here suggested for me to get, and i7 -12700kf cpu, here’s my build...

Soo I had to reset my bios because at first, I accidentally set my ram speed to 1866mhz while my ram sticks are actually 1600 mhz, so when I saved and exit, I got a blank screen, then that's when I reset my bios thru cmos battery so it would go back to default, it looked like it worked but now...

Here is the results of a Windows Memory Diagnostic test I ran and viewed in my events viewer. My PC Specs: CPU- i7-9700k @3.60GHz 32 GB RAM @ 4x8GB, 3200MHz Asus Z390-A Motherboard Zotac RTX 3070, 8GB Windows 10 Pro 64-bit ver. 21H2 My event log details of the windows memory management test...

Hello, Today, I ran Memtest for the first time on my PC and discovered that the RAM is faulty. I've experienced memory-related issues for some time, such as crashes, blue screens, and reboots, but naively concluded that these problems were being caused by an unstable XMP profile. My main...

Hello! I've recently built my second ever computer and have been having anxiety about if my RAM will cause system instability. In my last build two years ago, I had paired a Ryzen 7 2700X with 2 X 8GB of G.Skill Ripjaws V 3600mhz CL16. At the time, I was unaware that the processor was not well...

I recently built a new system running an i5 12600k and 32gb Corsair Vengeance 5600 C36 ddr5. My motherboard says it's rated for mem speeds up to 6200, would it be possible to push my stick to levels anywhere near that number?

So let me explain, I bought my computer 5 years ago: Processor Intel Core I5-7400 Kaby Lake LGA 1151 3.0Ghz 6MB Cache, BX80677I57400 Motheboard Gigabyte GA-B150M-Gaming 3 DDR4, chipset B150, LGA 1151 Fonte Corsair CX500 V2 500W, Certificado 80 Plus Bronze, PFC Ativo, CP-9020047-WW - BOX RAM...

Hello, I have a Dell G15 having two slot of Ram for Dual channel configuration. My system already has preinstalled with 4 + 4 that is 8 GB of total ram (having 1r x 16). My system can support a maximum of 32 GB (16+16)of ram. Can i install 16gb of 2rx8 ram in anyone of two slots and make them...

Good morning, So my PSU EVGA 750 watt Bronze had been failing for a little while. I probably continued to use it for a month as it started to make a grinding noise under high load, but eventually would calm down. Once it started to make the noise consistently I replaced it with an EVGA Gold 750...

Can I combine 2 similar single sticks of 16gb sticks, instead of buying a set of two? The set of 2 is a lot more expensive than buying single sticks separately, and there also arnt many other options. I was planning on purchasing either 2 sticks now or 1 stick now and adding another...

Hi, I have pre-built gaming system specification as below: CPU: Intel - Core i5-7500 3.4GHz Quad-Core Processor (₹16659.00 @ Amazon India) Motherboard: Gigabyte - GA-B250M-D3H Micro ATX LGA1151 Motherboard (₹8589.00 @ Amazon India) Storage: Western Digital - Caviar Blue 1TB 3.5" 7200RPM...

Hello, and thank you in advance. Today, I installed an 8 gb 3200 MHz ram together with a 4gb 2666 MHz ram. I read somewhere that this is fine since the higher ram will just clock down. Now, when I booted it with the 12 gb ram, it fails to boot normally and loops in "Automatic Repair couldn't...

https://computecheg.com/en/product/xpg-gammix-d20-desktop-memory-16gb-2x8gb-ddr4-3200mhz-cl16-20-20-udimm-black/ I am so sorry this may sound utterly stupid but I am not good with pc building but I just find this good price for me(cheap) so are cheap rams good or do they have any kind of hidden...

I'm trying to get it somewhere around 8-10gb RAM, since my PC came with only 4GB usable RAM. I've tried searching with google but I got very mixed responses. Can a more professional person guide me on this? Here's some of my pc specs if needed: x64 bit windows i have 16 gb ram installed CPU...

I want to install better ram sticks(x8) to replace the stock ram (x16) that came in my Lenovo legion 5 pro (rtx 3060), also at the same time want some extra ram just to be future proof, i was thinking of buying 16 gb and 8gb module of G.Skill Ripjaws , only difference is the size of the modules...

A few days ago I was playing Rocket League and all of the sudden my pc BSOD and turned off. It would not turn back on fully after this. It will boot up and say preparing automatic repair and then takes me to the windows options for recovery, but will not boot into windows. I did not get a chance...

I am using an old PC with a Core 2 Duo E8500 processor @ 3.16Ghz. ( which supports DDR 2 Memmory ) The motherboard is an ECS - G31T (Dual-channel DDR2 memory architecture - 2 x 240-pin DDR2 DIMM socket support up to 4 GB - Support DDR2 667/800 MHz Memory) The PC works fine with 1 x RAM stick...

I have an ASUS G732LXS-94 motherboard (laptop) with 64GB of DDR4-3200MHZ memory at 1.2v. Is it possible to upgrade ram DDR4-3200MHZ at 1.35v to get a better CAS Latency?

Imputing the RAM timings for my model causes a black screen when booting. I've tried using A-XMP profiles but it has the same issue. I'm using patriot viper steel ddr4 32gb (PVS432G320C6K) which has a timing of 16-18-18-36, however at the moment it's running at 16-20-20-40. I've been able to...

Hello, after replacing the CPU I couldn't even get into the BIOS. So I removed one RAM and everything worked. It looks like this: 1 RAM-1st slot= works 1 RAM-2nd slot= not working. 2 RAM - both slots = not working. I got kit of two hyperx fury 3200 mHz and both of them work in the first slot...

Hi, I am building a cheap pc from aliexpress and wanted to know if I could use normal ddr4 memory on a xeon e5 2683 v3 or only server memories? any help is appreciated thanks for reading till here.

Hello I've been getting a couple of restarts, I think it only happens when playing a game. 0x3B(0xC0000005, 0xFFFFF80704FF35E3, 0xFFFF8B873F36E940, 0x0) SYSTEM_SERVICE_EXCEPTION I'm looking at doing a check for corrupted files, and a Disk check, followed by a RAM test, and a re-install of the...

Hi guys, I have a system that is pre built and I'm looking to change the memory to a faster one, what would the best stable memory that would be compatible with my parts be? CPU: intel core i7 9700k 3.6 ghz coffee lake Motherboard: MSI MPG Z390 gaming pro carbon lga1151 GPU: MSI GeForce RTX...

I am currently working on a project and the motherboard I am using is the ASUS WS WRX80E-SAGE SE. When I was selecting RAM based on the compatibility list, I selected 8x M393A8G40AB2-CWEGQ. I went ahead and ordered these from CDW, but when they arrived a collection of sticks that were...

Hi, I'm looking to add memory to my laptop (has 4gb inbuilt) Is there any difference between https://www.kingston.com/en/memory/search?partid=KVR26S19S6%2F4 (priced lower) and https://www.kingston.com/en/memory/search?partid=KCP426SS6%2F4 I checked the compatible systems list, mine isn't...

I have 32 GB of 3600 corsair vengeance ram, in bios when I choose the auto clock speed it sets to 3466, so I decided to manually choose 3600. However, whenever I would try to shut down my PC, it would just turn right back on, I went into bios and switched it back to the auto 3466, and it was...

The Intel CPU supports the following memory: But the DDR4 memory module (DIMM) has a native speed of 2133 (it is published as 3200, but probably I should enable XMP for that to work). I still want to be able to work with the 2133 speed - without XMP. Would the 2133 speed work with that Intel CPU ?

This computer was working great for a while, then I took out the original i7-7700 out to put in my brother's new PC and I put an old (but still working prior) Pentium G4560 in its so my mom could have it. Installed a new SSD and tried to boot it just to get 3 long red beeps and 2 short white...

I have a Gateway SX2865 desktop computer with 2 4gb memory slots. For some reason, one of the slots doesn't work. When I plug a memory card that I know is good in the slot, the computer beeps 3 times and does not boot. Does anyone have an idea on how to fix the slot, or am I stuck buying a...

In my RAM settings, my PC recognises that I have 16 GB installed but it says that only 7.95 GB usable. I installed a second 8 GB stick yesterday to replace an old broken one of the same kind.

Hello everyone. After activating SAM (Smart Access Memory) on my RTX 3070 video card and Ryzen 5 3600 system and running the system, the screenshot goes away after Windows runs for a while. After turning off SAM, there is no problem, Windows continues to work. The same goes for the resizable...

I have an ACER Nitro 5 Laptop i5 11th Gen. Originally it has 8GB of ram installed with 3200 MHz speed. Yesterday I bought a RAM with the same speed of 3200mHz. After inserting the ram, I'm expecting that it would double the speed hence it decreases the speed down to 2933mHz. Please see: Please...

Hello guys ! The motherboard (gigabyte z370p d3) recently i tried to install windows 11 so i needed to enable the secure boot. I tried to enable it but it says that i need to update "platform key pk". I did that step and enabled the secure boot then my PC didn't post. I have 3 sticks of RAM: 2...