VCore

Forum discussion tagged with VCore.
  1. C

    Question Default Vcore setting not stable for i5 8400 with Turbo Boost ?

    Hello everyone, I am having a peculiar problem with a i5 8400 Coffee Lake cpu that I recently acquired from eBay. Upon installing the CPU the system booted normally, however Windows 10 install would crash within 1 or 2 minutes with either MACHINE_CHECK_EXCEPTION or the system would just...
  2. Question Are these voltages correct?10400f on z490

    Hi,are the VCCIO and system agent high for an intel 10400f?and the others? ,motherboard is an asus prime z490-a and 2x16gb corsair vengeance pro, i just activate the xmp1 for 3200mhz in the bios(the recomended one according to asus) and left everything on auto this is with 2min of aida64...
  3. E

    Question Overclocking stability help, VID and Vcore knowledge and overall clocking/temps

    First post here, a year and a half after building my first PC. Late at the party if you want my honest opinion. I wasn't really paying much attention to my CPU/RAM clockspeed, overall voltage, safe temps, etc. After a while I noticed temps over 85 degrees and put a "band-aid" on it with the help...
  4. M

    Question Can I theoretically run my 3950x at 1.3-1.35v Vcore?

    Got a new PC updated the bios because I thought the extremely high voltage was a bug, haven't changed a single setting in the BIOS other than DOCP and FCLK. Or is it perfectly safe to run 1.45v Vcore? Will I lose performance leaving it stock? Getting mixed suggestions online, so thought I'd ask...
  5. Cyber_Cow

    Question Ryzen 2700 Vcore, edc tdc, ept not appearing

    Hi I'm trying to do a modest overclock of my CPU. Yes I am using the Stock Wraith Cooler but it barely reaches 70C under load so I figure I should have some thermal headroom for a modest 200-300MHz overclock, especially because my CPU refuses to boost under load. At default my Bios reports a...
  6. SadisticSam

    [SOLVED] Ryzen 3 2200g overclocking issues

    First of all, I am new to pc builds and I am currently on my first ever pc. If there is any clarification that is needed let me know! I have been trying to overclock my Ryzen 3 2200g. Here are the things I have tried in chronological order (consider this is my first time trying to overclock and...
  7. Colafrasamu3319

    [SOLVED] 1.45 of Vcore too high on my ryzen 5 2600x?

    Google Translated: I have an x370 Gaming Pro with Ryzen 5 2600x, I don't know if my 1.45 Vcore is high, could it be used at a lower Vcore? can you explain me how? because a friend of mine who has the same processor goes to 1.2 Vcore. the maximum temperatures are 64 degrees my heatsink is a...
  8. Vana Ivan Pandovski

    [SOLVED] Can someone explain to me what is with my VID & Vcore?

    Hello, may I ask something about overclocking a Ryzen 5 3600 on MSI B450 Tomahawk Max motherboard: So usually when not overclocked the VID and the Vcore in HWINFO64 are kinda synced, right?! So when I punch an overclock of 42.00 and add manual override voltage to 1.3250v, save and reboot, then I...
  9. zantaff

    Question Z170-A giving high Vcore values on a 6700K

    I'm overclocking my i7 6700k on a Z170-A mobo. I was using the mobo's "EZ Tuning" feature to get a benchmark for how much I can overclock my CPU on this board before manually setting it. It has essentially 3 different tuning settings and each seemed to give me higher than normal Vcore values...
  10. fmsolidsnake

    Question STRANGE (?) VALUES FOR CoreVID (VID) AND Vcore

    Hello to all. I am a beginner with overclocking and I would like someone to help me understand if the values I have are normal. i5 7640x on MSI X299M-A PRO. Values in idle and standard settings. See photos 1 and 2. Is it normal that Vcore is at 0.472 and CoreVID (VID) is at 1.130? I...
  11. D

    [SOLVED] VCore Low?

    Hello, I'm quite new to overclocking so apologies if this is a bit stupid. Recently I just got a new Maximus XI Hero and 9900k and decided it would be a good time to start overclocking, I've been following some guides and ended up testing 5GHz at 1.28V. So I go and put in 1.28V manual voltage...
  12. D

    Question i7 8700k overclock help!

    i just oced my i7 8700k rocking it with a 212 evo, i was using multi core enhancement, with this feature my frequency was at 4.7 ghz and the vcore voltage was being handled by this feature, so i decided to oc myself, i achievied 4.8 ghz with 1.33 on the vcore, anything lower than that would...
  13. [SOLVED] Help in Undervolt at the 5 3600 Ryzen at Biostar B350GT3 / High VCore and temperature

    Hello how are you? I have the processor Ryzen 5 3600 installed on the motherboard Biostar B350GT3 (with the latest version of the BIOS) and would like to help to try to solve a nuisance that is happening with my PC. The temperature of my CPU in IDLE is between 50/60 ° Celsius and this worries...
  14. xMenace

    Question Event 41 Kernel Power BSOD

    I have an 8086K @ 5.2Ghz with very good cooling (H150i), yet when I play Rainbow Six Siege, and this only happens in Siege, I periodically get Event 41 Kernel Power BSOD (From Event Viewer). "The system has rebooted without cleanly shutting down first. This error could be caused if the system...
  15. K

    Question Is 1.3v of vcore too high for i7 7700k?

    Is 1.3v of vcore too high for i7 7700k?
  16. [SOLVED] 9900k idle core frequencies high?

    Hey all, I'm testing overclocking my new build: Gigabyte Z390 Gaming M 9900k (+ Kraken M22 cooler) 32GB Ram 3000 Right now I've set it to 5Ghz clock ratio / Vcore to 1.325 / LLC Turbo / AVX 0 (I read somewhere that BIOS is faulty and should be set to 0 until updated) When I run HWinfo I get...
  17. M

    [SOLVED] New PC not posting

    Hi, I started a build a little while ago and it’s been causing me nothing but problems. Here are the specs: OS: Windows 10 Pro Processor: AMD Ryzen 7 2700x Motherboard: MSI B450 Gaming Pro Carbon AC Graphics Card: GeForce GTX 1080 8GB Ram: 16 GB Trident gskill Hard Drives: Samsung 860 EVO SSD...
  18. R

    Is my CPU Cooler Too Tall for My Motherboard?

    Hello, I just had a quick question concerning the CPU Cooler I just bought. The problem is that the four screws that are supposed to line up with the standoffs are too high to reach all four of them. https://gyazo.com/b4870f0fa4ebd3d38e313ab8ba8e6b1a I managed to get two screws into the...
  19. F

    Is cities skylines better than sim city?

    Is cities skylines better than sim city 5?
  20. T

    how to fix auto typing rog claymore core

    when i type something using my keyboard it starts malfunctioning and pressing different keys. can you help me with this problem.