3200 MHz

I want to upgrade to 32GB RAM I'm using this one HX432C16FB3A/16, and I can't find the same one anymore to buy it. the only option is to buy this KF432C17BBA/16, its same speed and company. does it work?

Hello everyone, im trying to max out the laptop ASUS ROG Zephyrus G16 GU603ZV-N3009 Eclipse Gray and noticed that it come with 16GB ram and its max capacity is 48GB. I want to add the 32GB memory to have 48GB in total but unsure of dual channel performance and if it will even work. Thanks for...

Hey! I have had an issue for a long time and I haven't found any way to fix It yet, so. First of all these are my specs: - MSI Z370 PC PRO - i5 9600k OC 4.9 GHZ 1.3v - Hyperx Fury Black DDR4 3200mhz CL16 2x8GB - Radeon RX Vega 56 8GB I just ran memtest86 on both of the sticks and got 0...

First My Specs CPU – Intel I7 10700K Motherboard – MSI MPG Z490 Gaming Plus GPU – MSI RTX 3060Ti 8GB Gaming X Trio RAM – Adata XPG 16GB 3200mhz DDR4 Gammix D30 Adata XPG 16GB 3200mhz DDR4 Gammix D30 Cooler – Cooler Master Hyper 212 Halo Black I can't able to tweak memory above 2800mhz...

Hi All, I'd like to ask for your advice regarding my issue detailed below. My specs are the following: AMD Ryzen 5 5600x RX 6750 XT ASUS B450 Plus-II mobo G. Skill Aegis DDR4 2x8GB 3200 Mhz 1TB SSD (Samsung) Seasonic GX 650 Gold PSU At first, the RAM sticks were set at default 2133 Mhz...

Hello everyone! So i got a new GPU and wanted to up my build a little bit in other areas. Right now i have: CPU: I7-8700K running stock / 4.6 OC Motherboard: Gigabyte Z370 HD3P F14 BIOS New RAM: G.Skill F4-3200C16D-16GVKB - 3200 MHz with CL 16 Tried XMP to 3200 and manually setting up 3200...

I am trying to help a colleague set up his Corsair 16GB CL16 3200 RAM. I activated the XMP profile in BIOS, but Task Manager still sees the RAM as only 2133. I also tried to manually set up the 3200 frequency, 1.35V and appropriate timings, but no success. In fact, his BIOS (Asus B560M-A)...

Hi, I am looking to upgrade my PC's ram to 32gb but I have a doubt. The RAM installed on my PC has 16gb of memory and runs at 3200 mhz. So, if I buy another 16gb stick with supported frequency upto 3200 mhz, will it run at 3200 mhz out of the box or will it run at lower speeds? PC name: Hp...

Hi, I am hoping to buy this RAM for my asus ROG swift B450-F motherboard and wanted to check if it is compatible first. I asked on the amazon UK if it was compatible and the response I got was no but with no explaination, so I was hoping to double check, and if it isn't compatible then I was...

Hi everyone, I just bought a new pc that has 2x8gb of ram in one of the module. Because I do some video editting I figured out that I needed more ram so I bought a couple of 16gb extra ram for the second module. The already pre-installed ram works fine in a 3200Mhz (1600 each) frequency but the...

I own a Lenovo Legion Y540 Gaming Laptop with 8 gb of pre-installed memory clocked at 2666mhz. I found a deal where I'm getting a 3200mhz dimm $13 cheaper the 2666mhz one. I wanted to ask whether the 3200mhz dimm would work with my pre-installed one in dual channel mode. I read somewhere that it...

Appreciate in advance as I’m pretty new to computer troubleshooting. I bought a prebuilt iBuyPower PC. It currently has 2x8GB 3200 DDR4 Adata XPG BW41 inserted. All the research I have done, I couldn’t find the same model number to order two more sticks of the same ram, so I went with the same...

Hello I want to get i3 10100 with 3200 Mhz Rams even though i already know that the processor support 2666 Mhz as maximum. I want to go for 3200 Mhz Rams because later I intend to upgrade the CPU from intel to Ryzen, so if I got 2666 Mhz Rams i'd then buy new 3200 Mhz Rams for my next...

Hello I got Corsair Vengence RAM and BIOS claims it is set to run at 3200 but when I check in Win10 it says it runs on 1600. How do I make them run at 3200? DRAM Freq 1600,1 RAS TO CAS 18 CLOCKS CAS Latency 16.0 Cycle time 36 CLocks command rate 2T RAS 18 Clocks

Hi, I recently upgraded my RAM to a higher capacity and faster one, but I started having Blue Screen problems after overclocking it. My Specs: MB: Gigabyte AB350 Gaming 3 CPU: AMD Ryzen 5 -1500X 3.5 Ghz *OLD RAM: HyperX Fury (2x4 = 8Gb - 2,666Mhz) "HX426C15FB/4" *NEW RAM: Corsair Vengance...

I am having this issue with 4 sticks of gskill 3200. I have docp turned on, but can not boot at 3200 but can with 2800 as my highest. Any ideas? Also I can achieve 3200 with 2 sticks just not 4.

I'm trying to make my PC quieter by adjusting my fan curves but I have turned off every fan and im still hearing the humm of a pretty loud fan (like louder than all the other fans put together) I have installed MSI dragon center to tweak the fan curves since it is easier than in the BIOS and...

Not too long ago I replaced my motherboard with a B450 Tomahawk, got a Ryzen 5 3600, and 2 Kingston HyperX DDR4 CL16 3200Mhz 8GB RAM sticks. Ever since I swapped the parts, I've been getting constant BSODs (Usually BAD_POOL_CALLER errors or MEMORY_MANAGEMENT errors) and crashes. The RAM...

Hello guys! So i want to upgrade my cpu to Ryzen 5 1600AF and i found this motherboard that i like - Asus Prime A520M (https://www.asus.com/Motherboards-Components/Motherboards/PRIME/PRIME-A520M-A/) because is cheap and it supports 3200mhz RAM. Now my question is, the socket is AM4, but...

First post here, a year and a half after building my first PC. Late at the party if you want my honest opinion. I wasn't really paying much attention to my CPU/RAM clockspeed, overall voltage, safe temps, etc. After a while I noticed temps over 85 degrees and put a "band-aid" on it with the help...

I replaced my old RAM with a 2x8GB HyperX Fury RGB and when I first booted my PC It just stated 2400MHZ so I went into the BIOS which I have an asrock x570 motherboard and I am not familiar with asrock BIOS but what I did was go into OC tweaker then change the xmp profile from auto to 1 and...

Hi guys, I am planning to build my gaming PC within January next year but I need to buy RAM now. I am not sure about specs of my future PC but guess it will be something like i5-10400 or Ryzen 7 3700X along with maybe GTX1660S or newer GPU (depending on prices). I can spend approx 1K USD in...

I have the following situation: I have installed the DDR4 modules according to the installation instructions (DIMMA-2 and DIMMB2), but the equipment does not start me and the EZ Debug indicator shows that it does not advance from the DRAM evaluation, leaving an infinite cycle between CPU and...

I've seen several similar posts here but none seem to offer a solution except "sounds like you have a bad motherboard".. I'll try make this explanation as simple as possible and hopefully someone has run into this and can point me in the right direction. Issue: Will only Boot with ONE RAM...

I have a Corsair Vengeance RGB 3600MHZ RAM, Ryzen 2700x, Zotac 2070 Super Mini, Gigabyte x570 Gaming X Mobo, Corsair RM850 W PSU, Cooler Master Ml240 Liquid Cooler. When I set the RAM to 3600MHZ and run a game I always crash and when its set to 3200MHZ I don't get any crashes. Nothing in my PC...

I found a website that was selling memory for pretty cheap. I'm stuck between these 2 options 32GB of 3200Mhz or 16GB of 4000Mhz. I don't exactly know what Mhz does to performance. It's pretty cheap for me to afford. So please share your suggestions on which would be better. The motherboard...

For a while I've been aware that my 8700k runs pretty hot. I've never overclocked (ever, not on any CPU), and have pretty sufficient case cooling over all (the CPU cooler is an H100i RGB Platinum). In addition, my case is a Phanteks Enthoo Luxe, which despite being a few years old now, is quite...

Hello! I've been dealing with this for quite sometime now. My specs are these: Asrock B450 Prime Steel Legend Ryzen 5 2600 Corsair Vengeance DDR4 LPX 2x8gb 3200MHz I have both sticks in their respective slots for a dual channel setup (A2/B2), and I'm trying to make them run that way. The...

So I just bought an MSI MPG X570 GAMING PRO CARBON WIFI mobo with a Ryzen 3700x. And now I would like to buy a Dual Channel kit. Could some wanna please help me to choose a good one for this mobo and processor? I am totally confused about if I should go for 3600Mhz or 3200Mhz. CL16, CL18 or...

I am building a new gaming PC with the following stats: - i5-10600 (no K- Don't want to overclock) Gigabyte Z490 aorus elite ac RTX 2060 super or 2070 super (not decided yet) 2 SSDs (not decided on the type yet) I am down to choose a decent RAM matching the set up. I have set my mind at...

I have HyperX Furt Black 2 x 8GB 3200mhz CL18 and I wanna upgrade my ram. I wanna upgrade to 24GB (money matters, maybe even 32GB but it's double the price here) Btw if it is important, I have Ryzen 5 2600 on ROG STRIX B350-F GAMING motherboard. Do i need another kit of 3200mhz CL18 or i can buy...

I have a dual channel kit of 3200mhz corsair vengeance rgb pro on a Gigabyte X570 UD . My cpu is an AMD RYZEN 5 3600 cooled by a Deepcool gammaxx l240 v2 ( 4.2ghz stable). I saw my ram is running at 2666 mhz . I entered the Bios and when I activated the XMP ( I only have one profile named...

Hello! So i got a this new build,everything is perfect except one thing. The problem is that the DOCP for the memories doesn't work and when i set it to 3200 auto ,the system restarts and i got no boot,the only option is to revert changes. I would leave it at 2133mhz but i realized that the...

I just bought another pair of G.Skill Aegis F4-3200C16D-16GIS and was in hope to double my Capacity. I pluged them in and enabled XMP. Which by the way worked for my earlier 16gb pair. So, i plugged them in and had Bluescreens with Errors like "Memory Mangement". There were many other BSOD's but...

So I have a pc with an i7-8700 in it and I found a Trident Z 16gb kit pretty cheap but its the AMD version so i just want to know whether or not it will work or if it will give worse or inconsistent performance, etc.

Basically what the title says. Using an MSI Tomahawk Pro. I have heard multiple things but I can't seem to find anything consistent, so I came here to find a definite answer. Thanks ahead of time!

Abstract: Got a Patriot Viper Steel 3200mhz 2x4Gb (x2) DDR4 set, but can only reach 2666mhz. Ram in Question here PVS48G320C6K My system: CPU: Ryzen 3 2200G Mobo: Msi B450 Tomahawk PS: Gigabyte G750H 80+ Gold What I tried so far... At first the ram ran at 2133mhz, but while trying to OC them I...

Hi all, Just in case, I would like to ask about DDR4 RAM for Ryzen 5 3600 (non X). I have found RAM in my local store: Team Group Vulcan Z DDR4 16GB (2x8GB) 3200MHz CL16 1.35V XMP 2.0 Grey Will those work OK on ASUS TUF B450M-Pro Gaming (mATX)? Motherboard is ready for Ryzen 3000 series...

Hey! im gonna buy new ram sticks tommorow and im trying to decide which one should i buy 1. G.SKILL FLARE X price-80$ DDR4 (RAM) 16 GB 3200 mhz CL16 1.2V 2. CORSAIR VENGEANCE price- 79$ DDR4 (RAM) 16 GB 3000 mhz CL15 1.35V 3. KINGSTON 16GB- 92$ DDR4 (RAM) 16 GB 3200 mhz CL16 1.2V My system...

So, I went into the BIOS and changed the speed of my RAM to 3200Mhz, since that is the rated speed it says that it can hit. Though, that's all I did, I did not enable the XMP profile of-said RAM sticks. Does me putting the speed to 3200Mhz allow it to now reach that speed, or do I have to enable...