AIO Cooled

So I have an Arctic liquid freezer ll 280 CPU cooler that I put on my front panel with the included AIO fans intaking air from the inside of the case. I do not have any intake fans behind my case filter. I still have some old Corsair fans I took off my front panel before when I had my old 212...

Hello, I've recently built a computer and I have this problem where it would report the CPU being at 91-95C and spin the fans to oblivion (As I have 7 fans) Cooling in question is ML360R RGB from Coolermaster. MB: Gigabyte Gaming X I can't 100% confirm, but if I leave the fans at Normal...

Hi, My friend recently bought a 360mm AIO and says he has noticed a big difference and suggests that I should buy one (He doesn't know much about PC hardware) I already have a 280mm Corsair h115i on an i5 8600k which is overclocked to 4.8GHz, would it be worth it to upgrade from my 280mm to a...

A couple of months ago, my computer started making a terrible clicking sound and shortly thereafter I started getting BSODs every 1-2 weeks during gaming sessions. I started monitoring my hardware this week and realized my CPU temps are hovering around 85 degrees during gaming and sometimes...

Hey. i built my pc today. I neatly connected all cables. when i started my pc i was shocked by the temperatures of my processor. It reaches 90 degrees Celsius when idle. The AIO makes noise from the liquid that goes through the cables and the RGB works. only in the bios is AIO pump speed N /...

Hello I have question I can’t seem to decide how I want to set up my radiator and fan set up. I have enough fans to do push pull however with my Motherboard I can’t fit push pull if I top mound the radiator. The main question is would a side push pull (6 fans) be better than a top push or pull(3...

Today my h100iv2 corsair water cooler appears to have kicked the bucket. On boot I get ‘cpu fan error’ and after much digging it appears the pump has stopped working. (I disabled monitoring however the cpu temps are sky rocketing after a minute or 2). It is plugged into the cpu_fan header and to...

Need some advice for case air flow. I have 3 fans on my AIO top mounter pulling air into the case (Case>Rad>Fans). 1 intake fan in the back. My Rad tubes are not log enough to front mount with the tubes coming from the bottom of the Rad (tubes on bottom are recommended for air bubble issues). 3...

Hi All A couple of days ago i got a warning when i booted up my PC saying that my CPU fan was not working properly. I didn't think much of it and tried to boot anyways to see if it still worked as normal, which it did. I've been getting this warning each time I've booted for the last couple of...

So I'm planning on building my own PC in a few months (first time doing it) and I'm planning to go with either an i7-10400 or an i7-10700. I had asked for some build advice and some people recommended that I go with an AIO hybrid cooler because the case I was thinking about getting only comes...

I have a Carbide Spec 05 case and I am planning on upgrading my CPU, MOBO, RAM and getting an AIO, I am going with the Nzxt Krakeb Z73, will it even fit cause I cannot find if it can but I went on the custom cooling config for corsair and it says it can fit a 360mm AIO if I remove the hard drive...

So I had someone over to build my PC for me yesterday, we tested everything, everything was good and working (minus the aio pump). He left, I took the PC to my room and plugged it in and went to bed. Now to the next day, I just tried to turn it on to test with my new monitor attached, and now...

I've gotten some good feedback on this on Reddit, but I'd like to see what this community thinks as well. TLDR: Is it worth it to do push/pull on an AIO rad when not using high static pressure fans and the rad is the only case intake? OP: Ok, so: I'll be moving from a Dark Base 700 to a...

Hey guys, I really need some help. I've been pouring through threads and looking around for an answer to my problem. I've had this PC for over a year now and just started monitoring the temperature my components are running at and my CPU is running extremely hot. Running games like Far Cry 5...

Hello everyone, Was looking into getting a case that provides great airflow through the front, and top for a top mount AIO. Cooler Master H500 is one of the first choices, but unsure if 3 intake fans, with one exhaust fan in the back with the radiator on top would be sufficient enough. Have a...

Hey all, just need to get some verification that my CPU cooler might have finally gone bad. I have an h100i v2, have for years now. Lately my idle temps have been pretty high for an AIO, hovering around 45-50c. Almost like it's passively cooling. Also, the pump seems to run full throttle...

So I’m going to be building in an Enthoo Pro TG. I currently have the CoolerMaster ML360R. But I’ve been reading about negative pressure and positive pressure, and I’m almost certain I will have negative pressure in my case due to the following: I will have 2x 140mm intake in the front of the...

Hi! I just bought and installed a deep cool gamaxx 240l v2 AIO on my system! But there is nowhere to plug in the 4 pin molex cable for the RGB as this platform doesn’t have RGB headers! (Or does it?) Was just wondering what my best solution is to get the lights working on this older platform...

I'm planning to buy the Coolermaster Masterliquid ML240L but I don't want to have the radiator fans have its LED turned on. Will the fan work perfectly if the RGB wire is disconnected from the header?

Hi all am looking to buy a new case, inside I will be adding ATX X570 motherboard 3700x cpu 16gb ram And a 2080 graphics card Seasonic FOCUS Plus Gold 750W I will be adding aio at some point not sure on the size yet but might be a 360mm option, I won't do any custom water cooling. Also what...

Hey everyone! I recently got an Arctic Freezer 240 AIO which is working great, but over time I have noticed that temps have started to increase during idle and gaming. Now before I go any further, I'd like to mention that the AIO cable that powers the whole thing is slightly damaged, it has a...

Should I be looking at getting a new aio, current one is 360mm still keeping low temps never really getting higher than 40°c however it is about 5 or 6 years old. I've recently noticed it does make a rushing sound every now and then guessing it could be getting clogged up?

I have 2 radiators and need advice on best placement. Case: Obsidian 500D RGB CPU Cooler: X73 360 (CPU is 10900k) GPU Cooler: single 120 (it’s a 2080 ti EVGA FTW hybrid) X73 only fits on front, so it has to go there, but where should I mount the GPU radiator? In back as another intake or back...

Hello all, I have a Corsair 280x case and I'm planning to put a radiator at the top, would it be better if the fans were placed on top of the radiator or underneath it?

Hi. I hope i posted into the right place. Recently i did a build for someone that even if i told him im not yet into rgb and lights setups he wanted to do something. I failed of course on syncing the pump with the lights from the fan and that is the reason i am here. First here are the...

Hello, I have a maximus Hero X and a delidded 8086k and i was told that my idle temps are a bit high.. My rig is : Motherboard: Asus Maximus Hero X Processor: i7 8086kdelid - 4.8Ghz @ 1.2vcore GPU : RTX 2080 TI EVGA FTW3 ULTRA Ram : 32GB G.SKILL Trident Z RGB / 3466Mhz PSU: Corsair RMI 850...

Hey all, hopefully someone here can help! So I've been overclocking my built PC that I've had for a while, like 4 years or something. This AIO cooler is consistently running at 1,300 give or take. The rated pump should run at 2500 RPM, aren't these suppose to run at 100% all the time for water...

Hi Guys, below is my setup: X570 I AORUS PRO WIFI 16GB Gskill Trident DDR4 3600 GeForce GTX 1660ti AMD Ryzen 7 3700x My mobo has only one ADDR RGB 4 pin connector. I bought a CoolerMaster AIO and installed, connecting the fan's power to CPU header and all the other fans (3 CoolerMaster 120) to...

Hi, Just after Christmas i setup my RTX 2080ti onto the NZXT Kraken G12 cooling mount with a corsair H55 to see how AIO cooling worked to drop my temps. At first i saw a passive temperature of around 30 degrees and at load it never went above 60 so i was happy with how it was as it was slightly...

Hello, finally joining the forum! I'll list my parts below for reference. I recently gave my PC to a friend who has down on his luck and have recently built a new rig. I'm trying to be more adventurous so I've encountered some stuff I don't know much about. Normally I'd try to test this kind...

Hi, I've just recently got a small upgrade, I was hitting 90°C on stock clocks on the i7 7700k with a Cryorig H7 (when i initially bought it, it wouldn't go above 80°C on stock clocks.) in the XTU stress test and IntelBurnTestV2, sometimes high 80s in games like EFT. Whilst this might be...

Hello all this is my first post to this forum. so I’ve just built a new system I intend to use for work and gaming on the side here are the specs: i9 9900ks Asus rog Maximus hero (WiFi) Corsair vengeance pro 3600mhz 32gb Rtx Titan Samsung 970 evo 2tb boot drive Fractal design Celsius s36 aio so...

Hi, In my new pc I'm running a R7 3700X with a front mounted corsair h100i platinum for cooling, but my idle temperatures are around 40°c, is this normal? It feels like it's kinda high... It's in the phanteks p400a, and has 3 exhaust fans (the ones that were at the front of the case...

The tilte says it all. Should they spin at all times? Or do they only start when the cpu gets hot enough??? I tried using the splitter that comes with but it didn’t work. I tried putting one of the fans directly in cpu fan header and opt fan header. Also tried on chassis fan 2. Nothing works...

Hi, I upgraded my intel sytem to Ryzen 5 3600 (so, lucky me!) with MSI B450 Gaming Plus Max motherboard and ADATA XPG Spectre D41 RAM (8GB X2). But I didn't buy any CPU cooler as I heard that the stock coolers comes with Ryzen are good for the job. But unfortunately I am getting over 90°C @...

Do I need to change/upgrade my cooling after getting high temps after enabling DDR4 XMP profile? I just recently clocked my DDR4 G.Skill 32gb ram from their base 2.2 GHz to 3.2 GHz through the XMP profile, and it jumped my CPU temperature up about 5 to 7 degrees. This is causing my CPU to hit...

So here's a little backstory. I recently ran a benchmark for my GPU, the inno3D GeForce GTX 1060 3GB Twin X2. With all the fans (case and GPU) running at max power, I achieved a temperature of 50 °C. I allready have a 240ml AIO instaled for my CPU, and I've measured the temperature of the air...

Hello everyone. I am currently upgrading/building my pc since my mobo and cpu is fried (probably due to high temps for several years). I’m going with the 3700X and plan to OC it (not crazy, but just getting some software to do it for me). Same goes for my ram. I want aio for my cpu since i’ll...

My plan are making sffpc with using 240mm aio. But i change the fan with xt140 who have 120mm mounting holes. Is it possible to do that? or i should use 280mm radiator instead? *If it possible is there any difference in performance?

So I am running an 8700K on a EVGA Z370 FTW at 5.0 with a voltage of 1.32v max voltage under load. Using a H150i Pro. Pumps and fan are at max. My motherboard says my temps are around 60 which is the same as HW Monitor. I have it set to adaptive. No BSOD or temp spikes. I have enbaled vdroop and...