I'm still a newbie to liquid cooling. Got my system stable after some issues, I do feel like my cooling isn't the best it should be like it should be a few degrees lower than it is. I've been struggling to find examples of how to apply good fan curves for my chassis, AIO fans and the radiator...
My Pc is starting to show its age especially my CPU. Looking to overclock it in the very near future and just wondering if its even worth with my budget friendly cooler. Not really interested in spending anymore money on a new cooler as the cost would be eating into upgrading my entire rig. Just...
I’ve recently bought the NZXT Kraken X53 for my pc. I installed it and it doesn’t seem to be working. I’ve tried to put the 3 pin into the 4 pin AIO slot. Doesn’t work. Tried to put it in the 4 pin CPU Fan. I read on NZXT’s website that if you have a 4 pin slot you should keep the most right pin...
Hi all - first time poster. I'm trying to optimize thermals and I can't see many of the fans in the bios or monitoring software, so it's hard for me to know if they're spinning fast enough.
Small digression: My wife and I bought 2 identical prebuilds from Cyberpower (would have built ourselves...
Greetings,
Firstly, apologies if I posted in the wrong topic thread, I'm not really sure where to post this issue I'm having. Anyways, I have a Galahad 360 RGB AIO from Lian Li, now I wish to control the rgb lighting through software, the problem is...the AIO model I bought is not the ARGB...
I have a Coolermaster ML240L V2 RGB plugged into the JRGB header on my B550 Tomahawk, but none of the lights are on. It's my new second pc and my first time using an AIO.
I need one chassis that let me mount the radiator of 360 mm on the top and that also support a push and pull configuration, just like the 5000D from Corsair. Please, thank you.
i am planing on swaping out my current water cooler as i had it for nearly 6 years and still goin strong and already had to replace the pump 2 years ago also they stoped making the parts/support for it 1st one >...
I just built a new pc, and there is really loud and annoying noise coming from the radiator/fans, is this normal or do I have faulty item or something ?
I'm doing top mount, so I guess there shouldn't be any bubbles.
and I'm talking while pc in idle and all temps around 30C.
here is what it...
Will the corsair ICUE h60i pro xt 120mm be good enough to cool i5 12600k?
Cant fit a 240mm radiator in case and big aircoolers wont fit to.
I am not planning to overclock.
Hi all,
I recently upgraded my system (MSI X470 Pro Carbon, latest BIOS) from a 2600x to a 5800x, along with an AIO (GameMax Ice Chill 240)
My PC temps in BIOS rise to 95c within a few minutes and the system powers off. I've checked the mounting, even RMA'd one AIO but the issue persists. I'm...
Hello all
i got ryzen 7 3800x and i want to get aio.. should i get Corsair h100i lcd or Kraken Z73
My case is Corsair 460X RGB Crystal Series.
Thank you
Hello, I just wanna know if there’s something I can do to make my temps cooler, I got this pc about 8 months ago and everything was fine, I’ve been playing games and didn’t have any issue until a few weeks now, recently I’ve been getting higher temps I used to idle at 35-40 now I idle at 45 and...
Hi , so recently i upgraded my cpu cooler from air to AIO cooler. Now my display not showing.
Before i did change it, my pc is working fine.
My mobo is TUF b460-m plus (wifi)
The aio i used is Chione e2-120 lite aio liquid cooler gamdias.
I followed the manual but the result is no display/no...
Hello, everyone. I just finished assembling my new system. Using an Asus Z790 Prime-A motherboard with latest bios, 13900k, and a Corsair H150i Elite Capellix for cooling. All Intel power limits are enforced and I have done nothing except enable XMP. Bios shows a CPU temperature of 46C. I am...
Hi all,
I recently moved my AiO from the top of my case to the front as this provides much better airflow for my case.
Before this I was idling around 50c and so also redid the thermal paste just to be sure and really tightened fully the connector so it had good contact.
After this I managed...
Hey all, thanks for reading. Long time lurker first time poster. I've been using my 11th gen MSI Aegis RS 11TG-222US for about a year now. Basic specs:
CPU Intel® Core™ i7-11700K Processor 8C/16T 3.6-4.9 GHz 16MB Cache
Chipset Z490
Motherboard MSI ATX Motherboard
CPU Cooler 240mm Liquid Cooler...
I have a brand new Corsair H100i RGB PLATINUM SE just laying around and I know a lot of am4 coolers are compatible with am5 boards but only if they don't use a custom backplate but I don't know if this cooler does uses one for the amd installaiton. I do know that a custom backplate is used for...
I am buying Cooler Master MasterLiquid ML360 Illusion Gen.2 ARGB which by reviews holds good, however, 1 small issue is that this cooler does not include a mounting kit with it, the same seller offers a mounting kit from Thermaltake LGA 1700 Upgrade Kit/AIO For TH Series Flor RC and MSI...
Hi All. It would be greatly appreciated to have your opinion.
I have Cougar Pouritas case with 3 x120 mm Cougar vortex intake fans On front panel and 1x 120 mm fan on bottom, 3x 120 mm Cougar vortex fans on top (exhaust fans) and 1x 120 mm Exhaust fan on the back. I also have NZXT X53 AIO...
Hi everyone,
So last week I ordered my computer with the following specs: https://be.pcpartpicker.com/list/nC7fVw
Mind you, this is a micro-ATX motherboard & case.
My goal was to have 1 rear 120mm exhaust fan, 2 top 140mm exhaust fans on the AIO radiator, and 3 120mm intake front fans.
As you...
Hello guys
I am using this case
https://www.msi.com/PC-Case/MPG-GUNGNIR-111R/Overview
I wanna buy AIO 240 mm or 360mm but I can't use 240mm to up cuz rams and motherboard vram coolers not fit
This one is fit on my front? Arctic Liquid Freezer II 360mm or I can buy 240mm for front?
Thanks
Hi,
I am looking at doing my first ITX PC build using a Phanteks evolve shift 2 air.
one major issue with this case is the fact of the radiator is mounted at the bottom of the case meaning the pump will be in a potentially bad place. (GamersNexus giving me anxiety :LOL: )
i was looking into...
Hello,
I recently started to notice that my PC was way louder after boot, I checked the temps and they were around 60°C , I used to have around 26-30°C when I installed the AIO (9 months ago in winter).
So I bought Thermal Grizzly kryonaut and some compressed air, applied new thermal paste...
Hi everyone, I recently updated my system and while testing my i9-10900 it's reaching 100 degrees on Cinebench.
The thing is I have a beQuiet! Silent Loop 2 360, and 6 more fans in my case.
It's a Lian Li o11 Dynamic, and the config is for the 3 rear and 3 bottom fans (12mm Noctua Chromax Black)...
My PC specs
Processor : AMD Ryzen 5600x
Ram : Gskill 32gb 3200mhz
Power Supply : Corsair SF750
Graphic card : msi rtx 3060 Ti
Operating system : windows 10
Motherboard : MSI B550 F Tomahawk
Case: Lian Li 011 mini
AIO: Galahad 240
Fans: 7 lian li AL
So I have 2 of the same set up. Yesterday I...
Hello,
I've got a 6700K paired with a 240mm AIO and no OC. I get abnormally high temperatures under load considering the cooler and the fact that the CPU isn't OC.
So, I'm not sure whether the AIO has an issue or whether it is the sensors. It's worth mentioning that it is my third 6700K, the...
I have a Ryzen 5 5600g and an MSI MAG CORELIQUID 280R (and an RTX 3060 ti in case that's important)
it has worked perfectly since I built my pc in November 2021 with an idle temp around 31 degrees Celcius and a max temp of around 72 degrees under max load.
However recently I noticed my fans...
Hi, first timer on this website. I've had this gaming pc for atleast 3 years and had no problems in the past. I recently bought a new aio cooler, Asus rog ryujin 240mm. I tried to install everything according to the manual. It lights up and displays asus on the oled screen. However the case...
Pretty much what it says in the title.
My ML240l RGB AIO cooler comes with a small manual RGB controller as shown here.
For some strange reason, upon connecting both radiator fans, and the pump RGB into this controller via the included splitter (shown on the left here), and pressing any of the...
Hello,
first off, I'm new to this forum and I'm currently working on my first PC. I'm sorry if a answer to this question already exists, but I haven't / couldn't find anything about it.
So here's my question:
I'm planning to buy the Pure Loop 2 from Be Quiet.
I have a Deepcool Matrexx 70 3f...
I have a corsair h150i elite capellix cooling a i7-12700k on an Asrock z690 extreme wifi 6e. My systems pump will not turn on, making the computer unusable. I have it plugged into the CPU_FAN header and I have the commander core set up right. I know the aio isn't defective because I bought...
So, I got a Hyte 3 Revolt PC Case for a mini-ITX project, my first build in a small space. My first build was a work of art IMO, and it only got better with time, but I'm worried about the small space - most notably, the limited airflow.
I hear the airflow is 'decent', and what I currently want...
Hi All.
I built my PC one year ago in H710 chassis.
My AIO's radiator was mounted at the front with tubbing at the top (see the photo).
Recently I started to hear a rattling sound.
Will placing the radiator with tubbing at the bottom solve my problem (see illustration)? Or radiator at the top...
I've got a question for you guys, expert or anthusiast, or maybe you just happen to know the answer to my question
So I've decided to get a 3080 Ti, due to various reason, but mostly because on my area the lower cards (3070 Ti, 3070, 3060Ti) are being sold higher than MSRP, and I just happen to...
Hi I'm building a new PC, my first choice for cooler is Noctua NH-D15,
but when we try to put the cooler, there is not enough clearance with the case and the RAM,
so I'm planning to switch to AIO, is this AORUS WATERFORCE X 360 AIO good? any problems with this AIO? (Cooling? Performance?)...