DRAM

Hi there. I'm having issues related to booting and rebooting Windows when I try to manually adjust my DRAM timings. I am currently using four G.Skill Ripjaw X DDR3-2400 8GB sticks. The timing profiles are 11-13-13-31. In BIOS, everything runs fine in "Auto Mode", but with "Auto Mode" my DRAM...

I currently have 2x4gb of Crucial Ballistix Sport LT 2400 DDR4, https://www.amazon.com/Crucial-Ballistix-Desktop-Gaming-BLS2K4G4D240FSB/dp/B00UFF7Y72?th=1. It has 16-16-16 timing with a voltage of 1.2V. I am looking to upgrade my RAM, but the identical model of my current RAM is currently...

Hello everyone, I know I never post here but, I want to ask to the community: Is the SanDisk SSD PLUS 1TB a Dram drive or a Dram-less drive? If anyone can help me with this I will really appreciate. Thank you.

As above stated I got some new 32GB kits of corsair vengeance rgb kits.. I turned system off unplugged power. Removed my current GSkill kits and replaced with the new kits. my mother board b450 tomahawk max , cpu ryzen 2600x .. anyways I took the old kits out and replaced with the new. my...

Hello there. Need your help good people. Few days ago I bought new DDR4 Ram from G.skill TridentZ model. Its XMP profile is on 3200mhz with CL14. So why can't I use dram ratio of 100:100 with 3200mhz speed? I can use only 2800mhz on 100:100. 100:133 ratio allows speeds over 3200mhz. On 100:100...

I just bought an i7-9700k, a 750x PSU and a 2060 super, and my pc turns on and switches between the cpu and dram light on my debug and then shuts off. It repeats this over and over and doesn’t stop. I have a Gigabyte z390 gaming x. Any suggestions?

So I built my computer on around Black Friday and it worked well for about a month and it suddenly stopped working? My computer showed no signs of anything failing and everything seemed to be working fine but the pc just wouldn’t post or anything, it would just turn on. So I figured it was the...

Hello, I have had recently many tough times with RAM, now I have bought a new HX432C16PB3K2/32 - the specs of this baby are such: 3200MHz, 32 GB, CL-16. Once I first plugged them in (right after clearing CMOS because I was testing the other RAM before which did not work and took a lot out of my...

So my computer wont post and is stuck on a black screen. On my mobo, the dram led is lit amber and wont go away. I overclocked my ram to 3200 w/ xmp. I did not mess with any other settings in the bios. When I played escape from tarkov and streamed at the same time, that's when my computer...

It's about Lexar NM610 500GB and Samsung 860 EVO 500GB. I'm a gamer (multi ran games at same time) and a home user with around 18 hours of mixed content usage. Really I can't choose between these to. I must mention that I don't have 4K VGA or monitor (for now) so that part is not my matter. Only...

I have a system that I was gifted from a neighbor that has been giving me some trouble. The original system was; Asus m5a99x R.2, a fx 8350, 12gb of ram, and a gt 610. In this configuration the system booted fine (unless one of the tpu/epu switches was in the wrong spot) I could get into the...

This story starts with me buying a 8 GB ram stick from a friend, and he asked me beforehand if I had the same DDR and frequency, and they indeed were the same (specs at the end). After putting the stick in DIMM1 of my motherboard, it kept giving me "Read disk error" and "Reboot and Insert proper...

Hi I have 3 DRAM sticks, two of them run @ 3000MHz C15 (dual-channel config) and one runs @ 2400MHz C15. So now maximum speed my memories can reach is 2400? should I replace 2400MHz one with 3000MHz sticks to accelerate speed? and what happens if I use sticks with same speed but different...

New build using the asus Crosshair VII Hero Wi-Fi. The board has the nifty numerical display at the top right, with four LEDs directly below it with different colors/meanings. In videos I've seen of this board working properly, on boot it cycles through those colored LEDs. Mine does not do...

System: CPU - Ryzen 3 1200 MOBO - MSI B350M Gaming Pro DRAM - G.Skill TridentZ RGB 3000MHZ (2×8, 16-18-18-38 @ 1.35v) GPU - GTX 1060 3 GB BOOT DRIVE - WD Blue 1T Today, I decided to update my motherboard's BIOS to the newest version. I followed all the normal steps (download, unzip to flash...

I am wondering, if there is some performance and/or compatibility issue or difference between use of 2 sets of 2 memory modules and/or one set of 4 memory modules. To be more specific, my motherboard is the ASUS Prime X299-Deluxe II (LGA2066, Intel Core X-Series), the processor is the Intel...

I am about to build a kinda powerful desktop PC and I need an advise how to pick a memory for the ASUS Prime X299-Deluxe II motherboard (LGA2066, Intel Core X-Series). Since I decided to go with Intel i9-9900X processor, and I am against liquid cooling, I need an excellent air cooler for my CPU...

Ok here's a long one, I'm posting because I'm at my witts end. I built this PC about 2 months ago. It worked, but I still had some issues like rendering device lost-while playing overwatch and recording on OBS. So last night I updated my graphics card drivers and motherboard. I Ran performance...

Hi guys, I just recently built a new PC and everything is working fine but when I enabled my X.M.P my ram only went to 1600 frequency even though it says in the BIOS 3200. I've tried changing it from auto to 3200 Frequency but it still has no affect. I've checked my motherboards supported...

So I just built my PC the other day. After installing windows, my graphics driver, and beginning to install/download other programs the PC screen froze on whatever picture I was on and my keyboard and mouse shut off. The led on all my pc parts are still on and the fans are still spinning, the...

I recently tried to install a new i9 9900k in replacement for my i5 9600k to which every time I would boot the system, I would get past the bios screen and windows would begin to load but fail. My first boot looked promising as it detected a new cpu and once it told me to set it up in the bios...

So I booted my PC today and after I left it on for a while (It successfully booted) my screen started glitching out, and my PC got stuck. If I hard reboot it, my computer continuously boot cycles and reboots during the DRAM check. When I switch some RAM slots, they PC boots successfully but then...

PSU was the issue- upgraded wattage to 1000w- no problems- may have been overkill for my set up System Specs: Mobo: MSI Arsenal gaming B450 Tomahawk CPU: AMD Ryzen 7 3700x COOLING: Stock AMD fan GPU: EVGA GeForce GTX1060 6GB RAM:G.SKILL Aegis 8GB 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) Memory...

I’ll start by listing my parts: I7 6700k non oc’d, 16gb Corsair vengeance ddr4 ram Krait z170a mobo 1080 fe gpu Storage is ssd and hdd My issue is as follows: I recently went on a weekend trip, pc working perfectly fine, and once I returned home my pc wouldn’t boot. Originally I tried a...

Hello everyone, I am currently using my Dell Inspiron 1464 (2011) laptop and I wish to upgrade my storage. I am planning to remove the optical drive and replace it with a SSD inside a SATA caddy. I have few confusions though. 1. I am planning to buy Crucial BX500 480GB ssd, which is DRAM-less...

Video Have taking this to a repair shop to be fixed and they reported it as working and ran a 1 hour test it while in Windows, I know it must have worked as Netflix reported a login for that area at the time of the test. Is there some easy fix for this issue? The lights in the bottom right of...

My old PC which I'm giving away to my sister has 8GB of ram, so I decided to add 8GB more but me being in a rush I bought the exact same ram sticks but with the only difference being the manufacturing date (years apart). Turns out the ticking timing of the sticks has changed and now they crash...

I've been through everything I've seen but my pc still won't post. My Specs are: Motherboard: MSI AMD MPG X570 GAMING EDGE WIFI CPU: Ryzen 5 2600X RAM: G.Skill Ripjaws V 16GB (1x16GB) DDR4 3200Mhz PSU: Cooler Master MWE Gold 650W 80 Plus Gold Videocard: MSI NVIDIA GeForce RTX 2060 GAMING Z 6GB...

My Bios is telling me one thing and CpuZ is telling me another. x370-f 1700x Corsair Vengeance pro 2x8 3200mhz

If anyone is running into trouble with a new Ryzen build that won't post and gives a DRAM error (yellow led on mobo) on the first startup with no post/black screen. Might have a solution for you. I got my Strix B450F mobo yesterday with 2x8gb Corsair Vengeance Pro 3200 ram and Ryzen 5 3600. All...

So I am attempting to assemble my first gaming rig. At the moment I am trying to test the CPU, RAM, SSD and GPU before I fit the components into the case. My plan was to install fresh copy of Windows to see whether there are any issues or not. I am facing the following problems: Upon switching...

Hi i've been researching NB frequency and I cannot quite figure out the math for what my NB frequency should be. From all the screenshots i've seen the NB frequency has always been a multiple of the DRAM but mine is equal to it. View: https://imgur.com/a/OO82c3j CPU: AMD Ryzen 7-1800x...

Hey all, I'm building my girl a gaming PC, I was looking over EVGA's suggested memory recommendations for their B360 mATX board, all of the recommendations were sets of 4GB. Would I be fine using Corsair Vengeance 2666 (CMK16GX4M2A2666C16) , OLOy (MD4U082616BGDA) or any other 2x8GB DDR4 sticks...

about once every minute my DRAM on my motherboard will flash red and stay like that for a solid 5 seconds, my motherboard is...

Hello all, I just finished my new Ryzen 5 2400g build and everything was going fine until I started trying to dedicate some extra DRAM into VRAM (I already had 1GB and the game was running fine but I thought adding some wouldn't do any harm). To do this I added a few things into the registry...

What is XMP, and how do I use it to get my high-speed memory to its full rated performance on Intel and AMD motherboards? Simple RAM Overclocking With a Few Clicks: How to Enable XMP : Read more

Whenever I try to turn on my pc, nothing but my motherboard LEDs turn on. No display or fans. I have an MSI X470 Gaming Plus motherboard and it has this EZ Debug LED feature that may help on figuring out the problem. When I turn it on, the CPU LED turns on for a moment then turns off. The DRAM...

So I've just recently bought a new motherboard to replace my old Gigabyte Z270X. I got the ASUS STRIX Z270H. After taking it all out and putting in the motherboard, starting it up I got no beep, no lights and no video output. Noticing I left some things unplugged I plugged everything back in...

I have 6 GB RAM (2x4) connected but only 1.95 GB RAM is read, I watched tutorials on Youtube but none of them worked. I run a Windows 10 64bit.

I'm having my first build with below components: Gigabyte - Z390 AORUS MASTER ATX LGA1151 Motherboard Intel Core i9-9900K 3.6 GHz 8-Core Processor Corsair Vengeance LPX 64 GB (4x16GB) DDR4-3200 Memory EVGA GeForce RTX 2060 XC ULTRA NZXT Kraken X72 Liquid CPU Cooler Corsair RMx 1000 W 80+ ATX...