My laptop fans are often turned off, as I only ever use the laptop for light loads. However, sometimes on startup, and sometimes randomly, my fans will come on very powerfully (too much for the temperature my laptop is at). When they are on very loudly, there is a chance my laptop fans will...
Got a week old Asus Zehpyrus g15 (2021)
AMD Ryzen 9 5900HS
GTX 3080
32gig ram
SSD 1 tb
I wanted to add an additional SSD to the new slot - Samsung 970 Evoplus 2 tb (yes I need a lot for work and personal use)
After installing the new SSD the temps went nuts in CPU and the new SSD. Although it...
Hello! I have an NZXT Kraken z63 cooling an i9-12900k on an MSI Z690 Edge motherboard. Only anomaly is that the micro USB that powers the cooler's LCD isn't plugged in, but I don't think that has any impact otherwise. My problem is that when I turn on my computer, the pump and fans kick on, but...
Is there anyway to easily improve the cooling in this? Could I just drill holes in it or point a small fan at it? I've seen elsewhere that I would eventually have to upgrade something inside, but would like to know if there is something quick and temporary.
I had two casing fans, One at front as intake and the other at back as exhaust. But recently I removed the front intake fan and moved it to the top but kept it as intake as before. The change is made because I was bothered with the led light of the fan as I couldn't focus on my work at night.
I...
Hello, I bought a new CPU, put enough thermal paste on it and made the fan faster, but I still have high temperatures. When I'm not doing anything my CPU goes to 60 degrees celsius and when I play a heavy game it goes to 90-100 degrees I don't know what to do.
My CPU: Ryzen 7 5700X
Cooler...
Hello,
I have the following problem with my current setup:
Mobo: MSI X570 Tomahawk Wifi (latest BIOS)
CPU: Ryzen 5900X
Cooler: Corsair H115i RGB Platinum
Case: Corsair 500D RGB
Fans: 4 case fans : Corsair LL 120
2 fans on AIO cooler: Corsair LL 120
When I'm trying to setup a...
My computer has a Ryzen 9 7950x CPU and I'm using the Noctua NH-D15S air cooler to cool it. When I browse the internet, the fan speed is usually at 100% and when this happens, the average temp is around 75 degrees. With how fast the fan is spinning, I'm wondering if there's anything I can do...
i have an old H60 2013 model from a 4690k build but just upgraded to a amd 5800x, was wondering if i can fit it on with one of the AMD mounting brackets ?
I just built a new pc, and there is really loud and annoying noise coming from the radiator/fans, is this normal or do I have faulty item or something ?
I'm doing top mount, so I guess there shouldn't be any bubbles.
and I'm talking while pc in idle and all temps around 30C.
here is what it...
Will the corsair ICUE h60i pro xt 120mm be good enough to cool i5 12600k?
Cant fit a 240mm radiator in case and big aircoolers wont fit to.
I am not planning to overclock.
Was playing a game and left my PC on while I napped for an hour. Woke up to my fans spinning really loudly. Restarting PC didnt do anything. MSI Center's fan control didn't do anything. Changing POWER Options to Power Saver etc. didnt do anything, neither did changing the fans speed through BIOS...
Hello,
So my laptop is a Dell XPS 17 9700 and recently I've had this issue where the laptop's fans would keep running even when the laptop is in sleep mode, and since I put my laptop in my bag, it heats up like crazy.
Today was my worst experience yet, the laptop became so hot that I could not...
Can someone tel me if i have to return the cooler or is there an adapter to connect my motherboard and cpu pump
Pcpart picker said everything was fine but the pump power cord is 3 pin hole side and the mother board had 4 pins but it also has a little blockage, am i supposed to remove that.
How...
What in the past and the present has this been ( windows pc , vs Mac ) .. I would imagine Mac being hotter in temps.. since windows pc has water cooling / big heatsinks , bigger Cases and fans , and Mac is Usally Smaller ( im not Talking about laptops, but if you want to below, you can :-D...
In my understanding there is 1 cpu fan connector, 1 case fan connector and 1 water pump fan connector.
So i can only put 1 or maybe 2 case fans on the motherboard?
I am building a mITX gaming pc. I have a z690m with a i5 12600k in the nr200.
What cooling should I use? Water or aircooling? Budget is around 100 euros.
Thank you in advance
Hi guys, just building my first PC. And I am stuck with the case fans. I have Arctic p14 3 pin fans and I am wondering do I need a fan controller for them?
I bought my pc like a year ago. Overheating started couple days ago. i noticed it while playing pubg and i had low fps in game all the time. Since then it overheates while playing basically any game. cpu temp raises up to 100c when playing for example pubg. Im not very good with pcs, i hope...
Hey guys I’m slowly building a using old and new parts this Friday I will have my new ram, cpu, mobo, and boot drive. I will be using my gpu, and psu off my old build.
Which leaves a cooler and a case. Just so I can use the the system for a few weeks until I can get a proper cooler and case...
I've just upgraded to an MSI 3070 ti Gaming X Trio from an MSI GTX 1070 Gaming X and I'm noticing that my custom fan curve in MSI Afterburner doesn't let it stay at 0 RPM even though it's temps are below the point where the fans should start kicking in.
I've also noticed that there's a yellow...
Hi all,
I recently moved my AiO from the top of my case to the front as this provides much better airflow for my case.
Before this I was idling around 50c and so also redid the thermal paste just to be sure and really tightened fully the connector so it had good contact.
After this I managed...
Hey guys!
So I just bought a 3080ti GIGABYTE and it is... pretty hot) Well actually it is not. But in order for to be at 71-75 the fans have to be spinning 100 percent. Which sounds like a jet taking off. So um... I'm trying to balance noise and temp. I'm using it in a Fractal Design R5 Window...
Hello all,
I upgraded my Lenovo ThinkPad E520 from an i3-2330M to an i7-2860QM. The laptop runs fine with no issues but it does run very hot.
Recently one of the USB ports stopped working and its located right next to the CPU. I think this happened because of too much heat.
I don't want to...
Hey!
I just ordered my 13900KF and I'm planning to use my Noctua NH-D15 to cool it but the reviews have me worried a bit as the CPU seems to get hot. Gaming is the heaviest workload I use my PC for.
Thanks!
Hey all, thanks for reading. Long time lurker first time poster. I've been using my 11th gen MSI Aegis RS 11TG-222US for about a year now. Basic specs:
CPU Intel® Core™ i7-11700K Processor 8C/16T 3.6-4.9 GHz 16MB Cache
Chipset Z490
Motherboard MSI ATX Motherboard
CPU Cooler 240mm Liquid Cooler...
I am planning on purchasing the corsair icue comander core xt and 6 cooler master sickleflow 120 V2 RGBs . I know the rgb fan headers are only for corsair fans. however, can i use the commaner core xt for the fan headers and daisy chain the rgb headers together and put then on a rgb slot on the...
I changed a new case, a CPU cooler and a new nvme memory.The pc restarted by itself after 30 minutes, it happened again after another 30 minutes, I opened a game and it happened immediately. Now it happens immediately as soon as I log in to windows, I don't have time to do anything. It also...
First off the specs.
Mobo-MSI Z490 gaming edge wifi
CPU-I7 10700k
Cooler-Noctua NH d15 chromax 3000rpm NEW
PSU-apex gaming 750w gold
Ram 16gb ballistic ddr4
GPU-MSI 3070 ti gaming trio NEW
2 3000rpm noctual fans NEW
Other fans etc....
Issue-bios/afterburner not saving/abiding by curves...
Running an r5 3600 with an rx 5700. They both go extremely hot. The CPU goes to about 60-65C idle w/o undervolt and 50C idle after a 0.0835 V undervolt, under load CPU still stays at 95C constant under load. GPU stays at about 55C and goes to 85C under load. What is wrong? I'm running on a...
This case is really weird. You can only install a 155mm cpu cooler which is very low.
According to some folks and statistics, the mugen 5 is the best low price/low height cooler. <-- Noctua might be better but is taller and more expensive.
The issue is that it's 155mm tall, so now I have to...
Recently upgraded my pc. New case and upgraded to a 750w Seasonic Focus gx gold rated , Zotac 3070Ti OC Trinity edition and a Ryzen 5 5600x paired with my old motherboard a B450 Aorus M with 2 ssd's 1 is m.2 ,Problem i have right now is when I try to play anything I start smelling burnt plastic...
Building a pc case to suit tough environments means looking at case building from a whole new perspective.
One of the best concepts I've seen yet is a rather large case tested by Linus Tech Tips.
It used a very conventional flow through system with some very unconventional extras.
Basically it...
I just built my pc about a week ago and when I look in the case all the fans witch is the 3 case fans on the front the CPU fan and the one fan in the back they are all spinning But when i look in my bios I only see CPU fan detected and CHA1 CHA2 and CPU OPT FAN is says n/a on the bios screen I...
Iam going to buy Deepcool GAMMAX 400 xt for my Gigabyte b660m motherboard, will the cooler cause any ram attachment issues?
Ram: XPG Gammix D10 DDR4 (2x8)
I've found a setting that can enable the control of a 3-pin AIO pump speed by using the DC mode in the BIOS. So, it's controlling the speed by lowering the DC voltage going to the pump, right?
My question is, does lowering the voltage going to the pump going to break the pump? I've read quite a...
Hi All. It would be greatly appreciated to have your opinion.
I have Cougar Pouritas case with 3 x120 mm Cougar vortex intake fans On front panel and 1x 120 mm fan on bottom, 3x 120 mm Cougar vortex fans on top (exhaust fans) and 1x 120 mm Exhaust fan on the back. I also have NZXT X53 AIO...
As the title says, my PC has out of nowhere developed a cooling issue. My CPU will reach temps of 90-100 celsius while idle or in the BIOS. The PC is relatively new, bought the NZXT H1 Mini Pro back in January. I figured the pump might be dead but it still reads at around 4200RPMs and I can...