no signal

Got a new AMW2720HF monitor, tried to set it up via HDMI but no signal. Neither HDMI 1 nor HDMI 2 work. My machine doesn't have a port for DP, so that's out. With my old monitor, I used DVI, which worked fine and testing the new screen with another computer, it worked fine as well, so the...

I recently built my computer with brand new parts. I first wanted to see if the computer would turn on and work so the only thing I expected to turn on was the monitor. I connected the monitor to the integrated graphics on my motherboard. The computer itself would boot up properly but not the...

Hello this is a post for my friend: Recently, I went to sleep and woke up the next morning with my computer not working. Lights and fans turn on but my mouse, keyboard, and monitors do not work. First, I tried to reset the BIOS by taking out the CMOS battery, and it did not work. After that, I...

I recently purchased a new CPU, Ryzen 7 5800x so I updated by MSI B450M Mortar's bios to the latest 7B89v1H3(Beta version). I flashed the BIOS using the flash button and after everything is done I noticed I can't access BIOS. Every time I press DELETE to access it before windows, it goes NO...

I just bought myself a Zotac RTX 3070 (Was lucky enough to manage to get one). Upgraded from an old MSI GTX 970. For some reason, after installing the graphics card I get absolutely no signal. I'm using an HDMI 2.0 cable (a really good high-speed one), but nothing. FYI, my PSU has one 6 pin...

Hello. This morning I tried to turn on my pc, but the screen was fully black. Noticed that all the fans were working (including gpu and cpu fans), but my monitor would show ''no signal'' and my keyboard/mouse would'nt work either. No weird noises or anything different. What could be the...

Hello, I am a rookie builder so I know I made a lot of mistakes but I request your help nonetheless. My specs are as follows. Prebuilt PC: Asus GL10DH (I’ve changed multiple parts, mostly just the fans.) GPU: Zotac 2060 CPU: Ryzen 7 3700x Motherboard: ASUS GL10DH (variant of ASUS PRIME...

When i play rdr 2 my pc turns to black screen and the no singal message appears to the monitor.The only solution afterwards is to reboot my pc again.This can happen after i have been playing for a while or even in the game menu when i first launch the game.My temps are fine and the voltage are...

I recently built my first pc, and I've run into my first big problem. It has been running with no issues for about 3 months. I just got an ultrawide 144hz monitor. While testing out settings on a game, it crashed occasionally, but it was never overclocking the cpu or gpu - I kept the specs up on...

Hi everybody, I just finished building my lower end budget PC. After building and throwing everything together, I go to plug my HDMI cable into my graphics card and into my Monitor. I connect everything else and I get no signal on my monitor. The monitor does work since I’ve had it on another...

So I am new here and I just need help with the PC. So I am fixing my friends PC and I get "no signal" on my monitor and black screen every time I start a game or just randomly. The PC still works but I can't do anything. I thought that the GPU was the problem or something so I pulled it out and...

When booting up my pc, my monitor has no signal until i get in to windows, the same happens when i try to get in to bios from inside windows or from the boot up. This only happens with my main monitor : https://eu.aoc.com/en/gaming-monitors/q27g2u-bk, which is connected through DP. My 2nd...

Hey guys! Today I finally got my RTX3080 TUF OC after 8 months of waiting. BUT when I tried installing it into place and starting my pc up, It only booted into bios. After that I restarted it, but now it keeps saying NO SIGNAL. Then I got worried that my GPU is broken, I changed it to my old...

Hi Guys, My friends PC is giving no signal to the monitor, the keyboard and mouse are not turning on What can I do? RAM has been checked and is not the issue I'm pretty sure Specs- Ryzen 3600 MSI B450 Mortar Max RTX 2060 16gb Corsair Vengeance RAM WD Blue SN550 500GB m.2 Nvme

Hey all Need some help. Bought a Gigabyte 3080 TI GPU. Installed it but it's not being recognised by the computer and has "no signal" when booting the computer. Now I was using two Dual PCIe 2x8 Pin (6+2) cables (something like this) and connecting both to the PSU to the GPU. So I was using two...

Hello! I recently bought a Gigabyte G27F Monitor to upgrade my build, but when i connected it to my PC it seems to not be receiving the DisplayPort signal properly. Furthermore, when i search for it in Windows 10 Display Settings / Device Manager it doesn't seem to be detected.However, it does...

Hello, Recently I have built my first gaming PC, and I have an ASUS TUF Gaming B550-Plus (WIFI) motherboard and an EVGA RTX 3060 XC GPU. I have an issue that whenever I shut down my PC and don’t use it for a few minutes, when I’m powering it on, the motherboard does not send any image to the...

Hello, please I need help about my monitor won't display anything after bios screen and just showing no signal (when about to enter into windows 10). Recently I bought pre-owned monitor Samsung SyncMaster B1930 to replace my very old CTR monitor Samsung Magic SyncMaster CD173A which had 4:3...

Specs: MB: MSI B150M PRO-VDH (MS-7982) CPU: Intel Core i7 6700 GP: AMD Radeon R9 380 Series 2GB RAM: 2 BALLISTIX SPORT, DDR4 , 8GB, 2400MHz, 1.2V Hello everyone! So I turned on my pc and the screen said "no signal" and the EZ Debug Led was switching between DRAM and CPU. My rams were placed...

I have the MSI 100ME GTX960 2gb card but it's not working for a while. It just gives black screen with no signal error. It can't boot to windows. The fans and leds are working, but the GPU isn't heating up at all. I tested it with a secondary card (a GT1030) and the bios says there's no card in...

Computer worked fine until yesterday, I removed and cleaned the RAM, removed the CMOS battery, checked that the monitor still works, and checked the cable but I still get no signal. I was able to get into the BIOS yesterday so I know that the graphics card still works, now I am unable to do...

Hello, I have a PC running on Gigabyte motherboard with 4GB DDR2 RAM with 1TB Seagate HDD, intel Pentium Not long time ago, the PC runs smoothly but now it won't display screen. Below are the condition The DVD tray can get out after I pressed the button The fan runs smoothly, not too fast...

Yesterday it worked perfectly fine, but after booting pc today, it showed no signal. I tried switching cables on monitors and also on gpu, same result, and I also tried pluging in DVI Dual link instead of display port, still no result (tried switching input on monitor). I also tried fresh...

I've recently built a new PC with a fresh install of Windows 10 (Ver. 20H2). Twice this has happened where I'll be 2-3 hours of continual use (Gaming, watching videos etc) and it'll act as if someone has pressed the Reset button. It'll immediately turn off and attempt to reboot. I don't get any...

So since the beginning of the pandemic last year I've been using an old monitor as a second monitor. After six months, the monitor wouldn't just turn on with the computer, but it would turn on eventually, like when I start to play a game or something like that. But since last Saturday (March...

123

Since few weeks ago, my custom desktop started showing a "No Signal" on the monitor when booting, but I usually remove the HDMI cable on both sides and put it back after some forced shutdowns by holding the power button. This morning, the same thing happened again, but after quite a while, the...

I have an MSI H270 M3 Gaming motherboard with a celeron g3930 CPU. I have attached, 4 3070's to the motherboard and a PCIE wifi card. When I install 3 x GPUs (1 in the pcie 16, 2 in the PCIE 1 and the wifi card in the 2nd PCIE16 slot) everything runs fine. When I try to connect the 4th 3070, my...

I upgraded my system to the specs below a little less than a month ago. Til last night, I was able to use dual monitors(DVI -> E2350 LG Monitor, HDMI -> Sony Bravia TV) perfectly fine. Today, TV shows "No Signal" not even at pre-boot. Tried: replacing HDMI cables (tested 3 of them) hooked...

Hi there, I’m install new memory into: Gigabyte GA-H110M-S2H I’m replacing Patriot PSD48G240081 DDR4 8 GB 2400 with: INTEGRAL IN4T16GNDLRI DDR4 16 GB 2400 My issue is that when replaced, I know have no signal on monitor. The computer boots as expected (1 beep, correct lights) but no...

My PC Specs: CPU : Ryzen 5 3600 (new) Motherboard : MSI B450 Tomahawk Max (new) RAM : Kingston HyperX Fury 2x8GB 3200 (new) GPU : Colorful GTX 1660 Super Battle Axe (new) PSU : Seasonic S12G 550w +80 Gold (almost 2 years) SSD : Adata 240 GB (new) HDD : WD Blue 1TB (almost 1,5 years)...

So I just build my pc for the 1st time I’m pretty sure I have everything connected at the right spot so when I start up my pc it says no signal I connected my hdmi in the gpu and nothings boots you only no signal could anyone please help me ASAP I’ve been having this problem since Sunday ...

Hi, I purchased an EVO 970 Plus 1TB to replace an EVO 970 Plus 500GB. As system drive, to make a fresh Windows install. My computer has been working fine for 1 year, no issues. Today I open my case, make the switch (unplugged power, removed and put cmos battery again). I have 4 other hard...

So this is a problem that I woke up to today (a single on Valentines day) where my new build that’s been working pretty great since November suddenly won’t output any signal to my two monitors. After looking around I’ve already tried a bunch of different things. New DisplayPort cables, tried...

Hello Tom's HARDWARE community, I'm a new user and would like to get some much needed help here. Suddenly my pc give no signal to the monitor, both the external gpu and the integrated gpu I have tried stripping it all, removing almost all components to the bare minimum and it still not work...

Hi all, I just got a new monitor because of my GPU Upgrade (1060 > 2070), the new monitor is Asus VG249Q. The 2070 has 1 HDMI and 3 DP ports so i needed a new monitor as i could not use DVI / HDMI anymore for both of my screens. Now I've tried to connect it through DP but it doesnt seem to...

I originally wanted to make a post starting with. “I have irrational fears about handling computer hardware and now this situation has happened where I’m going to walk away with real irrational fears please help me understand what happened.” I just built my first pc ever. And my prior pc was...

So, I got that common problem where monitor says "No Signal" after boot. Thing is, if I boot in safe mode (from system recovery) monitor works perfectly. If I restart from safe mode , monitor works perfectly as well. But when I shut down and turn on Computer that's when the problem occurs. Any...

Hello, today I was adding some parts to my pc and ended up with an unexpected error. My build is: mother board: Asus prime pro x470 GPU: Gigabyte 1080 CPU: AMD ryzen 7 RAM: Corsair DDR4 16 GB (but I was increasing it to 48 GB via two 16 GB sticks; again Corsair DDR4 ) Psu: EVGA super nova...

Hi Everyone. I have a very wierd problem. Yesterday I have changed my PC's GPU from Sapphire Pule RX 580 GB to a Gainward GTX 285. The reason of the change, I just borrowed the AMD one. So before the AMD I had the GTX 285 in it, and it was working plug and play. I inserted the AMD GPU booted...