voltage

Page 4 - Forum discussion tagged with voltage.
  1. Erikando

    [SOLVED] Overclocking AMD fx8370 on a gigabyte 970A-DS3P

    Hello guys, I don't have any experience with overclocking. I would like to overclock my fx8370, and I don't know what voltage is safe and I don't want to destroy my computer, could you help me ? I have AMD overdrive, Core Temp, CPU-Z and Prime 95 installed. CPU : AMD FX 8370 8-core 4GHz GPU ...
  2. kjrr.2136

    [SOLVED] DIY sound bar from old laptop speakers !help!

    Hello i am thinking of making a Bluetooth sound bar out of my old laptop lenovo laptop ( ideapad 510) internal speakers, from the internet i learnt that you need to change the digital signal to analog and then amplify the signal before connecting it to the speaker. I am a little worried about...
  3. K

    [SOLVED] Is 125w combined +3.3 and +5v enough? 5HDD and 2 D5 pumps

    Hello So, i dont understand power supply rails. Im looking to buy a 1000w psu (overkill but i want it), it can deliver almost 1000w on the +12v rails, but only 125w on the +3.3 and +5v rails combined. Are those 125Watts enough for 5 HDD and 2 D5 pumps? Along with keyboards and other usb...
  4. willyburns

    [SOLVED] Memory overclock not working? Problem with XMP.

    Yo, I'm having a problem getting the rated 3200MHz out of my 'Corsair Vengeance RGB (4x32GB)' on a new BIOS revision where previously everything was fine. I have an ASUS ROG Rampage VI Extreme and XMP was working fine with BIOS 2002; however, after updating to 3006, I cannot get my RAM to boot...
  5. goldenratio

    [SOLVED] P-state voltage not lining up with GPU clock speed

    I have a RX570 and in MSI after burner and Adreneline 2020 i have a custom undervolt set up to compensate for my cards poor thermals However when my PC is idle i have just noticed that in the idle P-state at 300MHz my voltage is showing as .900V whenit should be set to .750 as outlined in my...
  6. I

    [SOLVED] Question regarding 6700K Voltage and temp

    Hi everybody. Question about voltage and tempratures on my i7 6700K. Help would be very appreciated. Here is the TL;DR for people who don't want to read the entire post: Question 1) Why does every program in Windows show a different temprature, and why does it fluctuate like this? Question 2)...
  7. willcaddy

    [SOLVED] Could my Power Supply voltage being out of spec cause USBs to drop out and kernel power BSOD?

    Hello everyone :) I have been having some weird issues for a good few months now. Randomly without warning, the USBs will drop out (such as audio interface and USB HDDs) and then come back again almost instantly. I also have random blue screens when I start the computer up and when I check it...
  8. [SOLVED] RAM - half speed, half size, half mental issues.

    Hello, I have had recently many tough times with RAM, now I have bought a new HX432C16PB3K2/32 - the specs of this baby are such: 3200MHz, 32 GB, CL-16. Once I first plugged them in (right after clearing CMOS because I was testing the other RAM before which did not work and took a lot out of my...
  9. [SOLVED] Are this Ryzen 5 3600 temps right?

    Hi, I bought a Ryzen 5 3600 and i'm not sure if the temperatures are ok, I'm testing temps with Core Temp and while i'm playing it reaches 90ºc(what i don't know if it's normal), I am not planning on overclocking it and it has the stock cooler. I tried changing the voltage with the AMD Ryzen...
  10. [SOLVED] What do these numbers mean?

    :unsure: They are on my motherboard, a Gigabyte X570 Auros Master. Do they have something to do with the power supply? I've also seen it display two 'A' letters sometimes. Link: https://www.aorus.com/X570-AORUS-MASTER-rev-10
  11. michael112602

    [SOLVED] PC blue screening after changing core voltage

    I didn't really know what I was doing a few months ago and I changed the core voltage in msi afterburner a bit (I was looking at some mac bootcamp overclocking tutorial and it told me to change it but I don't know) but yeah shortly after it bluescreened and I got spooked and uninstalled...
  12. MadHacker24

    [SOLVED] Voltage

    Hey guys, first overclock here! I'm quite noob so I might have done something wrong. I have an i5 4690k with 3.50 Ghz stock. I saw that OC genie set the default cpu ratio to 40, so i started from there ... I managed to get to 44 with stable results. I turned up a notch to 45 and 1.25 V. In the...
  13. giann

    Question Does increasing RAM voltage help reducing the cas latency?

    I wanted to reduce my ram cas latency, i tried to decrease the cas by 1 more and it wasn't successful so, i am thinking of overvoltage my ram in order to do that so, what do you say? Is increasing the voltage helping decreasing the cas latency or for cas the voltage doesn't matter at all? Thanks!
  14. DanzZki

    [SOLVED] rx5700xt low voltage

    Hey so i built my pc recently with 5700xt evoke OC GPU and realized that its voltage is 725mV, from what i read people use like 1000mV which makes the card run at higher clocks, so my qustion is how would i overvolt it, what software should i use? Also if anyone uses same card, what approximate...
  15. kaapo55

    Question Is my ram voltage too high??

    View: https://imgur.com/PX80xq7 I just installed my new RAMS (Kingston HyperX Predator 16 Gt (2 x 8 Gt) 3200 MHz DDR4 CL16) two packs of those=4 pieces. I enabled XMP profile in bios. Is that dram voltage too high?? on the left is current middle minium on the right highest. Is this ok? check...
  16. [SOLVED] ryzen 3600 volatge and speed

    Hello. Is this normal. I mean the voltage and speed. Should be lower voltage and speed close to 3.6 and not 4? i didn't Overclocked anything or messed with ryzen master. The only thing is did was enable D.O.C.P profile on RAM so they run on their true speed. Motherboard: TUF GAMING X570-PLUS...
  17. yupu

    Question is ram voltage important?

    hello, i have a dell optiplex 990dt, recently one of the ram modules i have died i guess, the pc basically dose not turn on when that ram module is on it, so i assumed its dead, so im looking for a ram module of 8gb ddr3 and ive just noticed ram sticks have different voltages but i just cant...
  18. Question +12v got only 10.2v max Seasonic Platinum 750w

    I have issue with +12v reading in Mobo is just 10.2 at max and it suddenly off and on again and again. My PSU Seasonic Platinum 750w only 6 month y.o What should I do?
  19. J

    Question What voltage should I use to overclock my ryzen 7 2700 with stock cooler?

    Ok so I just got my ryzen 7 2700 with the Gigabyte B450m S2H motherboard. I stress tested the cpu and for some reason the voltage which is on auto goes around 1.0 to 1.09 volt which seems pretty low. I try to overclock the cpu to 3.6 ghz and after I booted on windows 10 and opened chrome my...
  20. zantaff

    Question Z170-A giving high Vcore values on a 6700K

    I'm overclocking my i7 6700k on a Z170-A mobo. I was using the mobo's "EZ Tuning" feature to get a benchmark for how much I can overclock my CPU on this board before manually setting it. It has essentially 3 different tuning settings and each seemed to give me higher than normal Vcore values...
  21. B

    [SOLVED] Will this regulator work?

    I want to buy two automatic voltage regulator (AVR) 2.4KVA - 2.4 Kw to protect the following UPS No-Breaks: One that has the following input specs in it's label: 220V/18A=3960W Another one that has this input specs in it's label: 120V/24A=2880W The question is: If I buy an automatic voltage...
  22. B

    [SOLVED] Regulators for No Break UPS.

    Hello... plz help. First of all, sorry for the broken english, I haven't written much in english recently and I don't know most of the tech terms but I'll make a great effort to make it readable. I have a very specific issue. At the place i work with, one of those thingies called Uninterruptible...
  23. [SOLVED] GPU Core/Memory/Voltage Issues.

    Hello, I've had this Gigabyte 980 ti for a while and i gave it to a friend. It was damaged somehow and would't output anything to monitors (pretty sure it didn't really do anything. I baked the card at 385 F for 8-10 minutes, following the advice of ifixit. I've done this 5 or 6 times before...
  24. B

    Question I4790k Thermal Throttling overheats. Help ?

    As soon as I turn on my computer the cpu heat constantly rises until about 100 C. I just noticed do the cpu only using about 30 %. I changed to the cooler recently to the H100i Platinum. I've run the intel extreme turning and it says thermal throttling . From my research I believe the solution...
  25. G

    Question Pc electrical problem wont let me turn on the pc sometimes

    People, I need to ask you, what do you think it can be? This is my problem. For some reason my source of power when under load makes a sound that is little heard but heard also it wont boot sometimes not even reaching BIOS, but all the fans and lights will turn on I changed the PSU and...
  26. barnus877

    Question XMP not stable

    Hi all, I have a problem with my Corsair RAMs. I enabled the XMP and it caused instability and blue screens. Then I tried to use the Ryzen DRAM calaculator. But it didn't help and my computer remained instabil. Then I tried to increase the DRAM Voltage and it helped i've put it on 1.45V but it...
  27. T

    Question 7700k, tweaking voltage and LLC

    Specs: https://pcpartpicker.com/user/theinfamoustoast/saved/#view=TCWWbv CPU settings: https://drive.google.com/open?id=11zqoHR3Tl_qHClAs20qsmN9WNXNoQ6QS right now I'm tweaking my overclock for the 7700k and seeing how far it can go. i did it in the past but I'm only really doing this now since...
  28. B

    Question PC Freeze and Power LED blinking after restarting

    Hello there, I have been having some problems with my PC recently. While playing games, PC keep getting freezed without any notice. When I say freeze, it means complete freeze along with screen, keyboard led, mouse led etc. After this freeze, I removed PC power cable and waited for couple of...
  29. Edge0410

    Question CPU does never reach base speed when on load

    Hello. I have quite an old rig based on an AMD X4 870K (Base speed 3.9 - TURBO 4.1) I managed to get an rx 570 strix gaming oc at around 90 bucks and,being quite an overkill for this cpu, i tried to overclock it a bit since i was experimenting bad times with this cpu along the time. The thing is...
  30. H

    Question Ryzen 2600x 4.1 Ghz 1.4v Overclocking question

    Hello, Specs: Nvidia 1070 ti overclocked Ram: 2 x 8gb 3200 mhz, overclocked to 3266 mhz, 18-18-18-38 timings Motherboard: B350 Tomahawk I own a 2600x stock cooler, with a decent airflow case(5 vents),decent ambient temperature and i was messing around with OC At the moment i have overclocked...
  31. K

    Question 2.04v recorded on vcore in BIOS Msi z170-a SLI Plus

    CPU: i7 6700k Motherboard: Msi z170s SLi plus Ram: 16gb g-skill aegis 3000mhz SSD/HDD: 128gb adata ssd, 1.5tb toshiba HDD GPU: Gtx 1070 PSU: Corsair cx 500 Chassis: Bitfenix Comrade OS: Windows 10 pro I had this issue with my 6600k as well. Cpu-z is recording the correct voltage but the board...
  32. AleksiDj52

    Question Unable to use CPU Multiplier x24

    Hello everyone first of all my English is not that good so i hope you understand what i say. If you want to check my specs it will be listed below. So CPU-Z says "Multiplier x 21.0 (9 - 24)" my CPU can go max x21 and CPU-Z says that it can go up to x24. Do i need to bump up the Voltage in BIOS...
  33. E

    [SOLVED] Are these HP chargers interchangeable?

    Hi everyone! I have a HP Chromebook X2 and a HP Spectre x360 laptop and I would like to know if can use any of the chargers on each device independently of the charging speed. I just don't want to damage them. These are the specifications for both chargers: --- means a solid line above a...
  34. andrewcaldwell9

    [SOLVED] Voltage question for 9900k @5.0 Ghz.

    Hey all, I have done my first overclock ever of any CPU. I am able to get my 9900k to 5 ghz on all cores. (sometimes it hovers between 4998 and 5004 mhz) I have also set the ring frequency to 47, . Is this ok? I wasn't sure how to do the voltage so I left it on auto to try to test the...
  35. R

    Question Ryzen 3600 idle temperature fluctuation?

    GPU: 5700 XT Gigabyte Gaming OC CPU: Ryzen 3600 CPU cooler: Scythe Mugen 5 rev.b Motherboard: MSI B450M Mortar Max RAM: Patriot Viper Steel 3600mhz CL17 PSU: Corsair RMx 850 Operating System & Version: Windows 10 64 bit GPU Drivers: Newest drivers as of date. Chipset Drivers: Newest as of date...
  36. Vana Ivan Pandovski

    [SOLVED] Can someone help me with Memory / Voltages UCLK-FCLK

    Hi, so I cannot be too much explanatory in the title of course but I want some of you guys that have knowledge on stuff as memory infinity fabric and memory and some voltages why are displaying on this way on this picture https://puu.sh/Ev87n/a5642517d0.png So first when I open HWiNFO64 there...
  37. N

    [SOLVED] Is HWiNFO64 correct on these voltage readings or no?

    View: https://imgur.com/a/ufdcz70 I have the cpu core voltage set to 1.300 and the VCCSA & VCCIO set to 1.220 with the LLC at High. CPU-Z reads the core voltage at 1.320. My question is, why are the voltages so high at the VID readout? I think I have an understanding of what the VID is but...
  38. Heskeli

    Question MSI X58 CPU Voltages

    Hello! I just recently put together a rather old but still functioning desktop for 1366 Socket with motherboard of MSI X58 Pro-E and Intel Xeon E5620 2,40Ghz. From the Google and Youtube I found a lot of info that this CPU is capable to "good" overclocking and I really would like to do that...
  39. A

    [SOLVED] I dont want voltage to go past 1.25 V. Which option do I select? | R5 3600

    Hi, my Ryzen 5 stock cooler is really bad and it can not handle ryzen's auto overclocking as the max temp reaches upto 93 degrees. I went to MSI BIOS setttings and changed the CPU RATIO to 3.6 which is the base clock of this new ryzen CPU. Now as I stumbled upon the CPU Core Voltage settings, I...
  40. A

    [SOLVED] Can't find The CPU Core Voltage setting in MSI B450 Motherboard!

    Hi all! I recenlty built a PC with Ryzen 5 3600 CPU, ADATA XPG 3200 RAM, RTX 2060 and MSI B450M-Pro VDH Plus Motherboard. I want to lock the Voltage of the CPU to 1.25 V and Frequency to 3.6 GHz as it is overheating a lot with it's auto boost settings (93 Degrees when it's on 100% load)...