[SOLVED] Ram running slow?

[bobjackieson]

Cpu-Z frequency: 798.4 Mhz (DDR4-1596)

Its ddr4 3200mhz ram and only running at idk... I enable XMP profile 1 like a guy told me on a forum and still running slow?

 

[bobjackieson]

https://www.userbenchmark.com/UserRun/31057005

I enabled xmp profile one for ram my pc seems to be running slow? new build and cant make it work right!

 

[Roland Of Gilead]

Hey there,

Maybe you're reading things wrong. Download/install CPUZ. Then open the memory tab, and post a picture of it here using imgur.com or something. He're an example:

https://imgur.com/cUw4AN9

View: https://imgur.com/cUw4AN9

List your full PC specs, so we can gauge better what's going on.

 

[bobjackieson]

Hey there,

Maybe you're reading things wrong. Download/install CPUZ. Then open the memory tab, and post a picture of it here using imgur.com or something. He're an example:

https://imgur.com/cUw4AN9

View: https://imgur.com/cUw4AN9

List your full PC specs, so we can gauge better what's going on.

https://www.userbenchmark.com/UserRun/31057005

https://imgur.com/a/Ekt5GCw

View: http://imgur.com/gallery/Ekt5GCw

https://imgur.com/a/az6vRjM

View: http://imgur.com/gallery/az6vRjM

 

[bobjackieson]

https://imgur.com/a/YKEawqO

View: http://imgur.com/gallery/YKEawqO

 

[bobjackieson]

My new pc seems a little slow. My ram is working but my cpu and gpu seem to be slow. Got a 3000 on time spy bench mark and getting average of 27.8fps on radeon setting menu when I alt in ets2! On cpuz my cores were around 800mhz each and I installed the cpu and gpus latest drivers... The build is 16 hours old...

Specs
R3 3100
Rx 580 8gb sapphire pulse
Corsair vengeance 2x8gb ddr4 3200mhz ram
Antec neoeco zen gold
WD blue nvme 500gb
Wd blue 5400rpm 1tb 2.5inch hdd
Gigabyte b450m ds3h

 

[rgd1101]

latest bios?
check cpu temp?

 

[bobjackieson]

latest bios?
check cpu temp?

I fixed it BTW... Sorry forgot to say! Ryzen master messed with my frequency and caused it to go from auto to 8.0 which means 800mhz.... Lesson of the day? Don't used software overclocks!

 

[Roland Of Gilead]

I fixed it BTW... Sorry forgot to say! Ryzen master messed with my frequency and caused it to go from auto to 8.0 which means 800mhz.... Lesson of the day? Don't used software overclocks!

Good stuff! Ryzen Master is okay for a software OC, but doing everything through the bios will yield the best results.