I have a Kraken X63 and a smart device V2. Neither are being fond by cam. Hooked the x63 to outside USB port and still nothing. Believe CAM is updated but cannot find where I would check to see. Also have Cam beta as thought it might be more up to donate. Board is a Z490-A Pro. First build...
I need a new PSU for my system and I don't really know much about them.
Intel Core i5-3330
AMD MSI RX 570 4GB
2x4GB RAM Kingston
Asus P8H61 Motherboard
240GB Kingston SSD
I have a good cooling system and my computer is mostly at low temperatures.
I don't really know my current PSU's brand, but...
Ok, this is a confusing one, I previously owned 1060 and my frames on rust medium settings were around 60-70. About 3 months ago I bought a 3080, I cranked my settings and was seeing about 80-100. Unfortunately, after playing for a while I saw some major fps drops which were confusing, so I...
I recently bought the NZXT H510 Elite case and the NZXT Kraken M22 Liquid cooler. I am really new to this stuff and didn’t do my research. Basically I bought the m22 which is one single fan because I thought it wouldn’t fit two fans with the radiator in the case thinking it would be attached to...
Hi All,
I recently got the NZXT Kraken X63 and installed it. Swapped it out from the Noctua NH-U12.
Once installed, I ran some tests under load and realized core 1 has higher temps than core 0,2,3.
I cant remember the temps before the swap but I'm hoping you guys might help me out?
I even...
Hello,
I'm planning on getting an RX6800 XT by the end of this millennium when the stock hopefully evens out, and was wondering if a H510 or a H510 Elite would be enough for the temps? I know they're not known for the best airflow but my current setup is doing fine so I'm hoping I can stick...
Hey guys.
Please elaborate on me because the more research I'm making the more confused I'm. My current build is overheating (OC'ed RX570) and I want to upgrade the case and fans... I love the look of nzxt but they are pricey (h710i, h510 elite) and they have weak airflow. I would like to buy...
In NZXT cam my Kraken x63 will not show up in the lighting nor cooling tab, so I went to the internet to find out why. The common solution I found was to uninstall the USB from the "control panel" or "device manager". The issue lies in the fact that this USB will not show up in either (please...
I recently build a PC and for cable management, the best I could do for the 24 PIN cable was to push it behind the cable bar of NZXT case.
However, that is introducing quite a stretch and bend in the cable and I am not sure if this would affect it's life. Should I change it?
Here is how it looks...
I have just built a PC with the following configuration :
ryzen 7 5800x - CPU
rtx 3070 - GPU
asus ROG B550-f (Wifi6) - Mobo
corsair h115i pro rgb - AIO ,
Nzxt h510 elite - case.
I wanted to keep the front panel nzxt fans, so I mounted the corsair radiator with the nzxt fans.
Connections Made ...
i have another problem. i dont have any usb 2.0 intenal connector in mobo my only internal usb is busy with the case. what i should do? i dont use my 2.0 in my case. theres any spliter for this ? i have a Gigabyte h310m ds2 2.0
I know the RTX 3060 isn't out yet so this is hard to say but I'm either planning on buying this second hand
Intel Core i7 8700K,
Gigabyte Z390 Aorus Master Motherboard,
Corsair H60 V2 AIO,
16GB G.Skill Trident Z RGB 3200Mhz DDR4 RAM,
MSI RTX 2080 Super Ventus XS,
1TB Samsung 970 EVO Plus NVMe...
Hi,
I recently watched this Gamers nexus video where he said an incorrect placement of the radiator could kill the cooler over time. The way I had mounted my radiator was in the front of the case with the tubes at the top, so this morning I opened up my case and reinstalled the radiator spun 180...
Hi there, everyone! I just installed a Kraken M22 water cooler on my OMEN 30L (the PC is about 1.5 months old) in place of the stock heat sink fan over my cpu (AMD Ryzen 9) in attempt to cool it down a bit when gaming; it was running on 80c and a friend of mine said that was a bit hot. I did not...
Just wondering if anyone can suggest any simple micro atx formfactor cases, that have a large side panel, and also a front panel, as i already have 2 blue thermal take Riing lights for front cooling?
I know of the Xigmatek Scorpio (see image below), but my gf has this case and I kinda want...
You know what's fun? Waking up to a house full of smoke, fire alarms going off and finding your desktop engulfed in flames..
That was a reality I never even though about until last Friday...
Que 5:45AM in the morning. We live on a busy alley way where there are always garbage trucks...
HEllo everyone , being my first build and being very careful. From the control hub of the case power/USB have connected to mother board , the led1 is connected and the led2 are connected to the sata cable and to the PSU. But there are two cables as shown in the first pic coming out and not sure...
I am having issues with connecting a HDD up.
To get some background stuff out of the way:
1.) The disk has already been initialised previously on the same system and is functioning properly, at least currently and previously
I have a 4tb WD Black HDD that I am trying to connect to my computer...
Hello everyone,
Recently I decided to upgrade my Thermaltake Water 3.0 240 CL-W233-PL12SW-B Water Cooler to a NZXT Kraken Z73 series Water Cooler. I should also add that I purchased Thermaltake Riing Quad 12 RGB radiator fans to replace the NZXT OEM fans. After installation, when I booted my...
Case - NZXT H510
Motherboard - ROG Strix B450-F Gaming
GPU - MSI RX580
CPU - Ryzen 3 3200G
RAM - Corsair Vengeance RGB 2x8GB 3200Mhz
PSU - Aerocool Integrator 600W 80+ Bronze
I'm in bed after a day of fiddling with a new rig, so I'm not in a position to do any more tinkering until tomorrow. I...
Hey Guys,
I am building a new PC very soon (just waiting for Ampere to release) and am having trouble deciding on my CPU cooler, so I was hoping for a good recommendation.
I will be cooling a 10900K inside a Phanteks P500A. I would prefer to use an AIO as I like the look. It doesn't have to...
Hi guys, I'm a newb here and apologies if someone has already asked this before. I did a search but couldn't find a related post.
Basiclaly I don't like to take a risk with an AIO water cooler since there is a possibility of a leak and damaging PC components. I'm using a non-K Intel CPU so no...
Hey guys,
I am just about to build myself a brand new gaming pc and am having a bit of trouble coming to a final decision about my case.
As the title suggested I am tossing up between the Phanteks P400A D-RGB and the NZXT H510i.
I understand that cases and aesthetics are personal preference...
SPECS:
Ryzen 5 3600
2070 super
G Skill Trident Royal 3600
650 PSU
m22 Kraken cooling
Let me first say I know I can send it back but I am trying to avoid this since I live in Canada. I also do not want to be away from it for long.
I am having problems with what I think is my GPU. After...
Hi Guys,
I am about to build a brand new gaming pc, I am going pretty high-end and am currently just waiting for the arrival of the RTX 3000 series (or whatever it is going to be called).
The rest of my build consists of a 10900K, MSI Z490 Tomahawk and a NZXT X63 Kraken cooler.
Since I am...
Hello everyone,
Hope you're all well. So, I removed two top RGB 120mm case fans that had two cables coming out of them and replaced them with two 140 mm Silent Wings 3 fans which only has 1 x cable for each one. When I restarted my PC, CAM seems to be reading my Kraken CPU fan (silent profile)...
Hi all,
Building my first PC and have decided to use the NZXT H1 as the case.
I've got a list of potential products which all seem to be fine together but just wanted to double check here. Particularly in terms of physical restrictions of the case but also i.e. matching ram speed to processor...
Hi i just bought a ryzen 5 3600 and a NZXT X52 AIO however im unsure if these temps are actually that good because im getting around 40C at idle (my room temp is 24C) and at load it gets to 70. usually jumps to 60C when i open chrome> How can i solve this and should i be worried
Hello everyone,
I was playing PC Building Simulator today and I downloaded a DLC that had some custom made PCs from the artist Brock Hofer, made to resemble his original NZXT Hyper Beast case. Now, I really liked the one below, which is a screenshot from the game.
I have an NZXT H500 case...
So, I'm building a new PC
(Aorus b450 elite, 16Gb RAM, R5 3400G,NZXT H510)
Plugged everything, did my cable management and when I pressed the turn on button nothing happed, rechecked on/off switch on the PSU, replugged the power cord then I noticed that whenever I plug it the RGB aorus logo...
Hey I'm building a new pc, can any recommend a motherboard. I have three in mind. Which would be the best? I am open to recommendation for motherboards a little more expensive but these are what I'm currently looking at.
I want to know if they would fit inside the case (NZXT H510i ATX Mid Tower...
Hello everyone!
I've run into this issue with a new case I bought. Before I continue, this is what I'm working with. GA-AX370-Gaming K7 (rev. 1.0) (motherboard) and the NZXT H510i. The front audio port (just one that functions as both headset and mic 3.5 MM jack) is not working. Now, there...
I'm building a new setup and I have a question about fan speeds.
My case is NZXT H710 but I replaced the case fans with 3 140mm Be Quiet! SilentWings 3 1000 RPM fans, 2 for intake and 1 as rear exhaust.
My CPU liquid cooler is NZXT Kraken X73 with 3 120mm Be Quiet! SilentWings 3 2200 RPM...
Hi, Im thinking of buying the H510 Elite case, but there's still one thing that I dont know for sure.
Does the H100X cooler fit in the front? And If it will get enough air to efficiently cool my i5 7600k...
(if these are dumb questions it's because im pretty new to custom pc builds sorry!)
Thanks!!
I was cleaning the front filter of my H710i and when I finished there was now a rattling noise from the top fans that won’t stop unless I press down on the panel. I checked to see if any wires were hitting the fans but nothing. I can’t seem to find what the rattling noise is coming from. The...
hi i will be running a H510 elite + Z63 setup, on the website it states 313mm as the GPU allowance after installing the radiator.
planning to get a sapphire nitro+ 5700 xt card which is 309mm, is it normal to remove the radiator fans and if removed, with the additional GPU allowance would this...
Hello. As the title states, I am having trouble getting my new PC to boot. I built it in the case first time, and nothing happened. I then built it outside the case on a wooden table, and it worked and brought me to BIOS, and all parts worked. I then built it back into the case, and it once...
I have been searching for this answer and haven't been able to find anything. I plan to buy the NZXT H510 Elite case. It has a front USB 3.1 Gen 2 Type-C cable to be connected to the Motherboard.
I have found a few motherboards that have the USB 3.1 Gen 2 Type-C support, however, the...
Hi,
I've bought a NZXT kraken x63 and I have a Corsair Carbide Series 275Q chassis and Gigabyte Aorus Master X570 motherboard (links to specs are at the bottom).
But I have two questions regarding installation:
What is the correct (or best) physical placement of radiator and fans.?
How to...