signal

Forum discussion tagged with signal.
  1. S

    Question Motherboard stopped reading GPU (white light)

    My PC was working without issue last night and for months before that, but when I turned it on today my monitors had no signal and my mb was displaying a white light. The GPU fans are still spinning and I’ve reseated the GPU and motherboard connections as well as swapped PCIe slots to no avail...
  2. T

    Question No signal on second monitor, but it's still detected in Windows ?

    I'm currently having an issue with my second display having a blank screen. It is set at 60hz because of the HDMI cable limit, my primary display is set at 120hz. Before reinstalling Windows last week, this was my setup and it worked without flaw. If I extend the display, I have picture, if I...
  3. ApocryphalAnon

    Question HDMI signal not outputting from PC

    Hi, this is my first post so tell me if I'm doing this incorrectly. My PC has been out of commission for roughly a week, it has not been sending a signal through the HDMI cable. I know that the HDMI cable works not to mention I know the monitor works. The HDMI port does not look damaged and I...
  4. S

    Question GPU fans do not spin, when turning the PC on, also no display, how to fix?

    Hello! I built this PC a few years ago and just today, when I was cleaning the PC from dust and trying to boot it up again, everything except the GPU turned on (fans didn't spin) and did not get a display signal. My specs: CPU: Ryzen 3 3100 GPU: Gigabyte RX 570 8gb RAM: Patriot Viper 8x2 16gb...
  5. D

    Question Constant white CPU debug light, no signal to monitors

    Specs: Intel Core I7 Processor 8700K Liquid Cooling GeForce 1080 8GB Graphics 32GB 2133mhz DDR4 Memory EVGA 500W PS 480GB SSD 2TB Hard Drive I was using my computer one night and my PC shut off (monitors stayed on but disconnected, so it wasn’t the whole power strip) then a few seconds later...
  6. PongLong

    Question No monitor signal

    Hey I have a question, my PC boots normally but I get no display signal. And it happened by itself after Windows reset. I had also tried other cables, monitor, and PC myself and I'm sure it's because of the PC. Also I tried to reset the cmos but nothing worked. Hope someone can help with this.
  7. TheFlash1300

    [SOLVED] How do i make my laptop emit signal while in sleep mode?

    Hello. I'm using my laptop as a router to emit signal, so i can connect 8 more devices. The built-in router my laptop has is 802.11ac. My question is, is there a way to make my laptop still emit signal even when the laptop is in sleep mode? Currently, the devices receive internet connection...
  8. WolfHeathen

    Question No VGA signal

    Hello! I've been using and building computers for almost 20 years as a hobby and this is the first time I've run into a problem that I don't know how to fix. Here's my issue: First off, my computer worked fine for about to months without any issues. Then, after a reboot, it stopped feeding a...
  9. mmzf

    Question Could this help me to get a better stable internet?

    Explained:
  10. L

    [SOLVED] RP-SMA to wifi amplifier or range extender

    Hello. I have a Night Owl WNIP2 wifi dvr and 4 wifi cameras around my property with a couple just almost out of range. In my head I imagine hooking cables up to the 2 rp-sma connectors on the drv then into some kind of amplifier and suddenly I get super-great connections to the cameras. I've...
  11. Superfly935

    Question Help: GTX 470 Fans spinning but saying "there is no signal coming from your computer. press any key or move your mouse to wake it up."

    I was recently trying to put a gtx 470 into a 2012 computer I found at a thrift store. When I use integrated graphics, it works fine with 3 different monitors but when using the 470 I get the error message show in the title. I've tried using a dvi to vga and dvi to dvi cable, along with making...
  12. muchdsign

    [SOLVED] 3 monitors randomly losing signal simultaneously

    SOLUTION : The GPU seemed firmly seated, but apparently it wasn't. Simply had to reseat it and it fixed it, for now :) Hey ! I've been using my new RTX3080 (This one) since november 2020 and it worked perfectly until very recently. I've got 3 monitors plugged into this gpu : 1920x1080 60hz...
  13. Jawd000

    Question No display on monitor

    Weirdest thing happened to me. My pc was in sleep mode when I woke It up, the display came in for 10-15 seconds and then went black, now everytime I turn on my pc it says no signal. (The pc does boot into windows) Things I've tried: Different PC Different monitor Different HDMI/DP cable in...
  14. T

    [SOLVED] No signal all of a sudden.

    So, the system was previously working fine up until a few weeks ago. My little brother was playing siege one night when all of a sudden the pc just dropped signal but he could still hear audio and provide inputs such as siege and discord etc. So far Ive tried; Reseating all Ram slots, Trying...
  15. SubZeroFlsh

    Question Monitor ramdomly briefly losing signal

    My monitor only has displayport out in and I have a GTX 970 with displayport output. The monitor randomly loses signal between less than a second to a few seconds. The monitor is still powered on. What I've tried: Connected my laptop to my monitor and didn't experince any cut outs in the...
  16. xbluethistlex

    [SOLVED] Terrible signal

    We've been using sky for a while now and always thought it was their fault the signal sucked, however once we bought powerline adaptors we realised we should be getting 50mbps and thought that thanks to the powerline adaptors we would have better signal. However this wasnt true in fact it was...
  17. user1029384756

    Question GTX 1070 not sending signal to monitor

    I have an MSI GTX 1070 8gb in my PC. I suspect it has overheated because I was playing COD yesterday and everything froze. It stayed frozen for a while until I got impatient and turned everything off. Now when I turn my machine on everything works, but I get no signal to my monitor. I've tried...
  18. M

    Question Newly Built System doesnt give HDMI signal

    I recently built a new PC for a friend and it was working fine. The next day it is no longer displaying a HDMI signal. Troubleshooting i have done: tried different RAM switched the dimm slot tried a different monitor different cord changed GPU CMOS COMPUTER PARTS Case: Phanteks P300 eclipse...
  19. Jim-Luc Tiberius Kirkard

    Question Computer suddenly stopped sending video to monitor? (Yes, I checked the sticky)

    All the lights still come on except for the blinky one by the power button. Monitor and cable have been tested with another comp and both work. Fans all come on too. Nvidia 1080 Intel i7-6700k 32gb ram 4.5tb sshd 500gb ssd
  20. S

    Question monitor suddenly stopped connecting to pc

    I woke up today, and my monitor just refused to connect to my pc. Initially, everything else was working (other than the monitor), then after I switched the power supply off and on my keyboard and mouse lights stopped glowing as well. At first, I thought it was my GPU, so I took out the GPU...
  21. Arymist

    Question Monitor Displays "No Signal" After Few Moments Of Playing A SELECT FEW Games.

    CPU: Intel I3 - 4130 @3.40 GHz GPU: GTX 750 TI MOTHERBOARD: Gigabyte H81M-S RAM: 8 GB ------------------------------------------------------------------------------- For the past ONE YEAR, I have been having problems with my display saying "No HDMI signal detected" after a few moments of...
  22. C

    Question Signal input out of range when Rust game is launched

    Hey all. Just found the site. Hope someone can help. When I try to run the game Rust off of my steam app, the game launches as normal but a few seconds after entering the loading screen the screen cuts black and says. "SignaI input out if range". It says the signal I’m supposedly using and...
  23. L

    Question Need nerd help with monitor issues

    I have a Toshiba 55SK8000PUA as my main monitor and a Samsung S32D850 as my secondary. The Toshiba is HDR and the Samsung is not. I have HDR enabled on the Toshiba (also enabled via windows) and it works fine. However, there are occasional problems. For example, when I have HDR enable on my...
  24. Ari_

    [SOLVED] How Can I Boost Signal A Very Long Range?

    My family lives at a very rural farm and have almost zero internet and no service at all. We are looking into boosting service but there are a lot of questions about it I need to ask. We have zero service in our house (we live in a hollow). But if we walk up onto our hill we can get about 3...
  25. Q

    [SOLVED] Ethernet Help

    The Ethernet cable that runs to my room through the wall does not work, I do not possess the skill set or really have the option to cut holes in the wall to try and fix the cable. The internet plan we have is 200 mbps and over a wireless receiver i average from 60-85 mbps. Are there any...
  26. Halo Bump

    Question No signal while gaming!

    Hi guys, I was using Pentium's G5500 integraded gpu UHD630 without problem untill I got an ASUS STRIX R7 370 DirectCU II OC 4 GB. After I launch a game in 2-3 mins the screen loses signal and I have to restart the PC. I was using a Deer 450Watt PSU and I thought was not enough so I purchased a...
  27. K

    Question gpu wont see both displays at once

    I have two monitors both connected to my 2080 ti by display port cables. I have a Benq Zowie XL2720 and a asus VG278Q. When I turned off my pc with the shutdown button on windows last time I realized that the motherboard lights stayed on for some reason, so I decided to turn my pc back on, when...
  28. Z

    [SOLVED] HDMI GPU to DVI-D Monitor. Is it possible ?

    I am looking to buy a RTX 2060 which has only Display Ports and HDMI. My old second monitor has DVI-D and VGA. Before i used to try and do VGA to DVI with a simple "non active pin adapter" but that didnt work since VGA is analog im guessing. So. Would making my HDMI signal from my GPU to DVI-D...
  29. E

    [SOLVED] Extend the wifi range of spycam? Is it possible using this method?

    Hi everyone, Its my first post so please bare with me... I'm working on a pet project that involves connecting to a wireless camera (spycam) from a few hundred meters away. The spycam uses the 2.4 GHz with antenna that allows the signal to reach about 75 feet away. However, my project requires...
  30. J

    Question Can't connect to a wifi even if my password is right.

    The building beside us has strong wifi and it is free until they decided to protect it with a password. And then, since our neighbor knew the password, they gave it to us. For the first few weeks, we were connected on the building's wifi. Until one day, the wifi's strength has weaken. I can...
  31. P

    Question Cable Modem Signals too high

    I work from home, and tomorrow I start a new job as an IT Help Desk Analyst. So, in true form I have been trying to fix my own problem, but I don't think there is a solution I can do from my end. Though, I wanted to see if someone else might have a recommendation. Even a temporary one. I live...
  32. Userpclol

    Question GTX 960 wont give signal/Wont show up in device manager

    I've been searching all day, the gpu can work on another computer , but not mine,i removed the cmos batter for 30 secs,still nothing,i tried an other hdmi monitor , still nothing,i disabled intel hd graphics, i tried updating the bios of my gateway dt71, it says :ROM file ROMID is not...
  33. T

    Question Why am I not getting a signal to my monitor when powering my pc

    I bought some new parts (CPU, MOBO, RAM and a SSD), and after I assembled them and tried to power the pc I get no signal to my monitor. I wasn't getting a POST beep, but fixed it after I realized the 24-pin connector wasn't all the way in. That didn't fix it either though. I'm out of ideas.
  34. Nokkie

    Question Big problem, little China

    Hello people of the internet! I have a major problem. Like most. I had purchased and installed a new processor and cooler combo. Installed them. Powered the system on. Everything but my two monitors (DVI and HDMI) and keyboard power on. After trying everything every forum said to do .. including...
  35. M

    Question Monitor loses signal, no other option but to reset (gpu dies?)

    Hi. Registered, because this problem has just recurred after a month. This first started happening on 2nd January. View: https://imgur.com/nMZxCGG It was then happening for days, as I was trying to find a solution. As this was happening my old GPU died, burnt? I have no idea, but it couldn't...
  36. A

    Question CPU PINS CAUSE NO VIDEO SIGNAL?!

    Yikes! I bent some pins in the CPU socket, and I put a used core (i7-3770) in the LGA 1155 Socket, Dell Optiplex 790. There was no video output, but the signal was fine. I put in the old core, and there was still no video. I will supply some pictures below. Image 1 Image 2 Could it really be...
  37. J

    Question My GPU won't work when driver is installed

    I bought an NVIDIA GeForce GTX 1060 - 6GB and installed it. I was using it for 2 days without any problems (even had a shot of Goat Simulator). However, on day 2 I decided to render a video in Vegas. An hour into the render, I heard the "USB unplug" sound and the PC monitor just shut off. The...
  38. 0

    New RX 580 Signal Issues

    So, I got a new rx 580 from powercolor. I removed my old 380 and installed the 580, plugging in the 6+2 pin and the 6 pin power connectors. I boot up the system and start to have issues with the monitor losing signal to the graphics card, as my display shows for 1-2 seconds and then goes...
  39. B

    Question MSI Z370 TOMAHAWK - Corsair Fan Hub

    Hi, I have this motherboard: MSI Z370 TOMAHAWK, and I want to get this Corsair Fan HUB: Corsair RGB Lighting Fan LED Hub. I've seen a video from MSI, but the Fan Hub was connected to a connector called "JCORSAIR1" or something like that, and I don't think I have that. Can I connect it to a...
  40. K

    [SOLVED] BIOS won't open

    Hi, I bought a new motherboard that is a ga-ax370m-ds3h an a new CPU Ryzen 5 2400G and 2 hyperx 4 GB 2400 MHz when I put it together my computer post I downloaded the Windows and when my screen went to the home screen it stopped and now it can't even open to the BIOS what can I do