When i go to:
Windows settings > update and security > recovery > advanced startup > restart pc into advanced startup > go to UEFI firmware settings > restart to open UEFI firmware settings,
the PC just restarts normally into windows 10, and trying to enter BIOS by using the keyboard keys while...
So I took a look at my bios settings, because why not, and I couldn't find CnQ.
I'm currently on the latest (2.80) version, and the latest chipset drivers are also downloaded.
Was it removed?
I need an NVidia chipset graphics card that can boot with a Legacy BIOS (CSM mode on a motherboard connected to an SSD that is formatted NTFS - MBR), AND ALSO UEFI bios.
I found this old thread...
https://forums.tomshardware.com/threads/will-a-gt-1030-work-with-legacy-bios.3309781/
and in one...
The following error has been preventing me from updating Windows 10 through Windows Update for quite some time (maybe a year or so): "Unsupported Disk Layout for UEFI Firmware".
I finally decided to give it a go and try solving it, and to do so, I used the MBR2GPT tool in order to turn my MBR...
I have an MSI B450 gaming plus max for my motherboard. I have windows on a Samsung 990 500gb. Whenever I go into bios to switch legacy+ uefi to uefi, the Samsung 990 doesn’t show up anymore. I am doing this to get windows 11
Hello. I just bought a used HP Z640, and was in the initial stages of setting the device up at my home. I started by clearing the CMOS, and reverting any changes by the previous owner of the device in the firmware so I could set things up how I wanted them. I noticed that legacy support was...
Hello there.
Recently I've moved house, the first time I turned my PC on it booted to UEFI. So I setup some of my custom settings as they had been lost and continued. After shut down I switch the power off from the outlet (this is every day). The next day I turn the PC back on it boots back to...
So, first things first, I HOPE this section is where this goes. If not, I apologize. I wasn't sure where to put it.
As the title states I accidentally updated my BIOS. How does one manage to do this accidentally? By downloading all optional drivers that Windows Update suggests while half-asleep...
Hey guys!
I am using an Intel 6600k together with the MSI Z170A Gaming Pro Carbon motherboard.
For one reason or another I want to modify the boot loader / sector to change how the operating system loads.
( https://rclaussen.de/veracrypt-boot-problems-after-windows-10-update-solved/ )...
Hey All!
I just installed a new Samsung 980 PRO M.2 SSD (2TB) to replace my old Western Digital SATA III SSD (250 GB). I installed the Samsung Drive, cloned the old drive onto the new drive using Samsung Data Migration and then went into the bios and set the Samsung Drive as the first priority...
Built a computer last year for the first time, and thought I'd try this Re-Sizable Bar feature for the RTX 3080. However I ran into a problem, Resizable Bar requires CSM to be disabled, and when I disable CSM my Samsung 970 Evo Plus 2tb M.2 Drive cannot be found in the BIOS at all, with nothing...
Hi everyone, hope u have a great day.
Here is the thing...
Right now I have Windows 10 PRO 21H1 (b1903) with MBR+Legacy boot.
System specs:
Asus Rog Strix B350-F
R5 1600X
XFX RX 570 4GB
16GB Corsair RAM on 2666MHz
Corsair Bronze 650W PSU
Since Windows 11 is coming I wanted to reinstall...
Hi there,
I have a UEFI win 10 on my GPT SSD and a non UEFI win 10 and a linux (kubuntu) on my MBR HDD.
I want to be able to boot them all. If I don't change HDD's partition table to GPT, Is there any way to move boot files of my non UEFI win 10 and kubuntu to the EFI partition?
View...
Suppose you have 2x 3200 & 2x 2400 Sticks.
This is running quadchannel and in general @ 2400mhz since the 2 Sticks are the lowest freq. correct?
If you want to run at 3200mhz you'd need to disable/remove the lower frequency sticks correct?
If that is the case, is it possible to utilize all...
Hello, I just fresh installed windows onto a new m.2 ssd. I did so with all other drives detached. Upon reconnecting the other drives, I can access them without a problem. They appear in my bios, but when i try to change the boot priority they do not appear. I think they may be on a different...
Hi,
The problem arised when I wanted to copy some files from my HDD onto a USB-stick. When I selected the USB-drive on my PC, I saw there were some files on there I did not recognize and figured I didn't need them, so I promptly deleted them. However, on second glance, I saw I did not select...
Hi there, I want to clean install windows 10 in UEFI mode on my brand new SSD (250GB Sata).
I know that I need to set boot mode to UEFI and disable secure boot.
I have an Asus P8Z77-V mobo, and here is how my boot menu looks like:
View: https://imgur.com/19ncBQC
CSM:
View...
Hello!
I'm out of my depth in this area, I'm in the process of installing Windows 10 on a newely built computer with completely new parts:
Motherboard: Asus ROG Maximus XIII Hero
CPU: Intel Core i9-11900k
SSD: Samsung 980 Pro 2TB (Inserted into the M.2_1 slot)
I'm trying to install through...
I was considering getting windows 11, so I looked at the Windows 11 system requirements and I saw that my nvme drive had to boot on UEFI to be able to get windows 11. To be able to boot on UEFI, my drive (Samsung 970 Evo Plus 1TB) had to be on GBT and not on MBR which it is currently on. I also...
Swapped over to a UEFI build of win10 with a fresh install (In case I ever use resizable bar). My Ram (4000mhz 16-19-19-39 G.SKILL TridentZ RGB Series 32GB) is no longer running at the 4000mhz profile I had it at prior to the UEFI install (on legacy bios) and it worked like that for almost the...
I was trying to get the insider build for Windows 11, when PC Health Check told me my PC (Gigabyte b365m ds3, 16gb RAM, external nVidia graphics) is not qualified for an upgrade. Found my PC/BIOS is confirming to all requirements including TPM except Secure Boot.
When I tried to change BIOS...
Hi, I did something stupid. i was trying to recover a reset computer.
I have a dell Inspirion desktop gaming pc -ryzenfx 1800
1 nvme ssd
32 gb ram
fx580.
I was using the windows recovery options and on boot, stupidly selected "boot into legacy mode"
Upon restart, the computer went dead. the...
Intel Core i7-3770 3.4GHz Quad-Core Processor
Gigabyte GA-Z77-D3H ATX LGA1155 Motherboard
samsung ssd 840 pro 128gb
Windows 7
Hi,
I am in the process of upgrading my 8 year old PC from windows 7 to windows 10. I built the PC, but my knowledge of BIOS and partitions is pretty lacking, so bear...
Both my disks are GPT.
PNY XLR8 CS3030 256GB Nvme M.2 SSD (OS)
TeamGroup GX2 1TB SATA SSD (Games and stuff)
When i disable the CSM and switch to UEFI, only the boot drive (M.2) is showing up and the SATA SSD is not showing up.
According to this post, MBR will not be shown from the BIOS when...
So I bought an M.2 SSD which I did install fresh windows 10 and everything, downloaded everything I needed, etc.
I'm booting correctly to the M.2 SSD only because everytime I turn on the pc I get asked which volume of OS to choose and I pick the one of the M.2, but I got 2 other storage...
Hi,
I recently upgraded mother board and processor, everything went fine but I hadn't done a fresh install which was obviously causing issue with internet stability. I did a fresh install today and decided I should go the UEFI route rather than sticking with legacy mode. Reformatted all my...
OS: Windows 10
Motherboard: Gigabyte A320M-S2H
CPU: AMD A-9600
I was looking in my BIOS/UEFI (unsure of which but I think it was a UEFI) and found an option called fast boot which apparently removed the ability to enter the BIOS from bootup. I thought it sounded useful as I could just shift...
Please am having a serious problem to install windows 10 on my hp elitebook 840 G2 (4Gb RAM, 500Gb HDD). I try to boot in UEFI native with my USB CD ROM it will ask me to boot from CD ROM, but if I press any key it will restart and stuck on hp logo. I try using UEFI hybrid it repeat the same...
Hello, I'm planning to build a new pc on B550 or B450 AM4 motherboard which obviously has UEFI support. (no internal videocore in AMD CPU)
Since videocard market is weird atm, I'm planning to use my 10-years old videocard with no UEFI support on it.
So If I install it in my new PC, will it load...
I am using an ASUS H310M-CS R2.0 mobo, Whenever I enter bios its looks like the plain legacy one which is white and blue. When I checked my system info it says BIOS mode is UEFI, then why doesn't it show the graphical UEFI bios that ASUS has instead of the plain white and blue one.
Is there any...
I purchased a 5600X to replace my current CPU, a 2600X. My motherboard is a B450 Gaming ITX/ac, and on the support page I saw I needed to upgrade to BIOS version 4.20 for 5000 series CPU support.
I followed the instructions for flashing new BIOS, installing them from a USB within the UEFI, and...
So I have ASUS FX503VD, and I bought Samsung 970 Evo Plus 500GB. Next to ssd, there is 1TB HDD. Of course I want to do a clean install to SSD, but I have some problem.
When I install Windows 10 to SSD, it goes properly in the beginning, and the system reboot the laptop. After this, it doesn't...
asus
asus fx503vd
bios
Boot
Boot priority
Boot problem
boot problems
Clean Install
Install
New SSD
samsung 970 evo plus
samsung 970 evo plus 500gb m.2 nvme
Samsung SSD
ssd
uefiUEFI BIOS
windows 10
Windows 10 installation
windows 10 installation error
Wont boot
Hi everyone.
Refer to this thread for context.
In 2020's Black Friday I purchased an Intel NUC8i7HNK. In it, I installed 2 250 GB Samsung 860 EVO SATA M.2 V-NAND SSDs. In the first one, I installed Windows 10. In the second one, Xubuntu 20.04. All using UEFI and GPT.
All worked wonders for...
Hello,
Starting a few days ago, whenever my pc has been unplugged from power for a while and i start it, it then starts for a brief second, and then restarts and i get to the American Megatrends screen where it says:
Please enter setup to recover BIOS setting.
After setting up Intel(R) Optane...
Hey guys.
This isn't actually my own board, but someone asked me to help him. He has an ECS B250H4-M20 mobo. But, the mobo does not recognize M.2 at all. It does detect SATA SSDs and hard drives. So I tried updating the BIOS which didn't work, then I tried getting 2 different motherboards of the...
I am trying to enter the bios to change fan speeds, but although I am spamming the delete key at boot I can't enter the bios. When I checked the system information for the bios version, it showed legacy. I went to look for a new version of the bios which I downloaded, but I can't install it...
Hi all,
So, my current desktop setup is Win 10 Pro with 2 internal drives: a HDD, 2Tb C: drive;
a 1Tb SSD (Sabrent brand) G: drive.
I bought EaseUS Partition Manager Pro to migrate the OS, but I get the message: "Boot disk cannot be selected as target".
Is there a way to make the Sabrent...