Netgear

I recently purchased a Netgear Cm1000 and a R7000p. I had spectrum come out to test the connection and they couldn't get it to work. The modem was working, because the spectrum tech connected a spectrum router to and and the wifi worked just fine. It was just my own router that had issues. I...

Hello, So I need some help here to open some network ports. I have a Netgear Router connected to my ISP's Modem, and I am trying to open the port 32400 so my Plex Server will work properly. I have some problems with that. I have opened the port on my Netgear Router (so I know that it is open...

I'm looking at choosing between the Docsis 3.1 cable modem, Arris SB8200 and the Netgear CM1200. Both are very similar, though on Amazon the Netgear CM1200 is $50 more, but also has 3x the amount of customers rating it. Even though the overall rating between the two is nearly identical. I just...

I'm not sure how unique this specific issue is, or whether there is a possible solution at all, but I have personally exhausted any possible solution to my problem that I could think of, and have come up completely empty thus far. To give background to my situation, I just moved into a new...

Recently encountered an issue with my router (I assume) whereas my ping starts to fluctuate after 2 days of fixing. I reset my router & extender, release & renew, flush, even reset my computer, and still receive this problem. The interesting thing is, my wifi and the speeds are fine on my...

So I am trying to streamline my internet and media server network in my RV living situation. I have 2 mobile hotspot devices I use for internet and streaming. My phone and a Verizon mifi device. I want my Netgear R6220 router to either serve as a repeater, or to connect my PC to my hotspot...

About a week ago I had my ISP come out to install fiber lines for gigabit internet. They ran the lines fine no problem (however they are still above ground in my backyard and have yet to be buried, said someone should be out in around 14 days to bury). It has been below freezing point past few...

So I bought a new router because I thought my old nighthawk was at it's end because while playing games out of nowhere my ping would shoot up over 700ms. I unplugged the router and went from my cable modem straight to my pc and the ping was back to it's normal latency. So i bought the RAX 200...

Hi guys, so I am having a bit of an interesting problem. First and foremost I want to make it clear that I followed the guide found here to get my router to even establish an internet connection (https://kb.netgear.com/1086/No-Internet-with-new-router-MAC-spoofing). Model: CM1150V|DOCSIS 3.1...

Hi there, Im hoping you guys can help me as literally nobody else can, Not my fibre installer, not my ISP and not even Netgear community... So I purchased a second hand R7000 Router and I got home and literally plugged it in and all was sweet! One day the internet was going slow, so I hit the...

My router is a netgear N600 wireless dual band gigabit router. (model wndr3700v4) I pay for download speeds of 100 Mbps. I connect my router to my modem via an Ethernet cable. I then plugged my desktop computer into the router with an Ethernet cable. Nothing is on wireless. When I plug...

I recently moved into an apartment and set up my desktop only to realize my adapter is having trouble connecting to the wifi. The apartment provides free wifi to tenants; it's wireless mode is N and it uses WPA2-PSK encryption. The USB adapter I'm using is the Netgear WNA3100 N300 model. It is...

Hey yall! I've recently bought myself a new router, the Netgear R6220, but i cant seem to get OpenWRT working with my DOCSIS Modem. It's an old Thomson THG571, the Router shows that there are packets received/sent between the modem and itself but it just will not connect to the internet, no...

i don't like a bunch of wires everywhere when im doing printing jobs, any way i can connect my netgear router to muitlple printers using a usb 4 port hub i found on amazon?

Hi everyone. I've been having this problem for two months now and I'm at my wit's end. Approximately every 24 hours, my internet suddenly becomes incredibly unstable. I'm still connected to my wifi, but loading webpages becomes much slower, youtube stutters, and I face almost constant DCs while...

Hey everyone, So I’m wondering if Ax Wifi is worth it for me. There’s about 30 devices connected to my network due to living with 4 other room mates. A 4K OLED tv, my Sony 4K 900F, phones, google homes, tablets, etc, etc. But everything is obviously made for AC. Will I still see the benefits of...

Hi all, I noticed on the router ranker on smallnetbuilder.com that the Netgear R7800 beats a lot of other routers. But this router was released in 2016. Why is it better than most of routers if its 3 years old? Is that good or are the new routers these days not built as well?

New Netgear Nighthawk R6700v3 . Multiple cables - all good but Pioneer VSX-70 audio system won't connect. Worked fine with old router. Loopback shows all ok, but still nothing. Multiple unplugging power cables from modem, router and audio system, starts and restarts, etc. but still no sign that...

Hello, As the title describes I am having an issue where I cannot connect to my router's IP nor my printer's IP with my windows 10 desktop however I can connect with my laptop. The desktop can connect to the internet, only the IPs are blocked from accessing the. I was using BitDefender and...

Can anyone suggest me the best router under INR.1500 Please. I found 3 but not sure if they are the best under INR.1500 1. Netgear r6120-100ins Router (Black) (https://www.flipkart.com/netgear-r6120-100ins-router/p/itmfyfdhzzyt3sqx) 2. TP-Link Archer C20 AC Wireless Dual Band Router (Blue)...

I have a netgear smart wizard router. I created a custom service on the port 25565, added it to the firewall rules on inboud services, and checked on the website: canYouSeeMe.org. Error: I could not see your service on x.xxx.xxx.xxx on port (25565) Reason: Connection timed out Anyone has an...

My ISP recently upgraded their network and now offer gigabit speeds. I upgraded yesterday and went to BestBuy and purchased a DOCSIS 3.1 modem (Link below). I already had a decent router that claimed it supported gigabit over ethernet so I wasn't concerned with it. When plugging directly into...

Hi I have att&t network router/hot spot. It's a mofi4500-gxeltev2 that has 4 Ethernet ports. I also have 2 other netgear routers. N150 and ac750 r6050. I ordered 1,000ft cat 6 cca https://www.amazon.com/gp/product/B01ETLP4WO/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 ( can always return)...

I recently purchased a Netgear Nighthawk x4s mesh extender so I could extend my wifi upstairs to my desktop and stream my steam games downstairs (thanks to the extender's configuration setting for one wifi name). Initially it worked perfectly, and I was able to stream downstairs exactly as i...

Okay so ive been trying to figure this out all night. So for starters let me explain my current network set up. I have Verizon fios, from my verizon router i have a cable which goes to my basement and plugs into a Cisco router. This router is set up as a separate network from the verizon one...

Have been using net gear wireless adapter model a6100 for sometime never had any issues with it. i am on my on windows 10 pc, not a prebuilt or anything. this AM it randomly goes out, and when plugged in, it says the last usb device you plugged in malfunctioned and is not recognized. have been...

Hi my girlfriend recently purchased a used pc. The specs are Cpu: i5 4460 Gpu: gtx 780ti Mobo: asrock h81 pro btc r2.0 Ram: 8gb crucial ballistic sport ddr3-1200 Storage: Kingston hyperx 3k 120gb ssd Case: Corsair carbide spec-05 Psu: evga 600w 80 plus bronze She purchased the pc almost...

Modest laptop but used to work very well until a few weeks ago: Intel core i3-3217U 4 gb ram intel hd graphics 4000 My issue is that even 4 tabs on google chrome prompts a memory alert. I can't use an IDE while having browser tabs open anymore. At idle the computer is about 40% memory usage...

Still deciding on my CPU I'll be using the Corsair Vengeance Pro RGB (16GB, 3200MHZ), Asus Dual Series GTX 1070 with a 860 QVO SSD or Seagate Barracuda Compute SSD (Depending on which CPU I choose.) My needs will be doing video editing in 1080p 60fps and gaming (1080p 144fps+). Keep in mind...

I am planning to built a budget gaming pc. I have planned to buy following components- i5 8400 corsair vengeance ddr4 16gb(2x8gb) 2400mhz ASUS ROG Strix Gaming RX 570 OC Edition 4GB GDDR5 Graphics Card CORSAIR SMPS CX550 ASUS PRIME B360M-D(https://www.asus.com/Motherboards/PRIME-B360M-D/) I...

Space isn't an issue in my case, but my other monitor uses a DVI-D cable. The problem is, the single fan 1660 Ti has a DVI-D port, while the dual fan one doesn't. So should I get the single fan 1660 Ti? The one I'm talking about is an Asus GeForce GTX 1660 Ti Phoenix OC 6GB. Or would it be...

Was looking at getting a rtx 2070, but there is a lot of variations of the same card (ie price/distributers). Is there a lot of difference or should I just get what ever fits my price range?

title !

Pc specs Apu AMD Ryzen 5 2400G Box Ram Crucial Ballistix Sport LT 4GB DDR4-2400MHz (BLS4G4D240FSE) x2 Mobo ASRock AB350 Gaming K4(AM4) Gpu sapphire Radeon RX 580 8GB NITRO+ Special Edition (11265-21) Ssd Samsung 860 Evo 250GB HDD Western Digital Blue 3.5" 1TB (7200rpm) Psu Corsair...

I am currently putting together a new computer with an X470 Taichi with Patriot Viper RAM (PV416G340C6K) and upon booting the system I keep getting post codes 15, b7, and 36. The Dr. Debug guide says that these are memory related problems and moreover this memory (PV416G340C6K) is supported by...

I’ve searched and can’t find my exact issue. Freshly build pc build and was having issues booting. Got the white steady cpu debug led did some research and figured out it was my hdmi cable. Changed the cable and the pc booted. I installed windows and after it’s automatic reset I got the white...

turns out i need to find a gpu that is supported by the G5 build to connect to as monitor

i have a Samsung N150 plus yesterday while i was watching YouTube the laptop was not responding it stopped working so i turned off and then turned it back on but it didn't boot to windows it was stuck on the loading screen on boot i have tried using hiren bootcd and doing a low level format and...

Hey everyone! i've been thinking about upgrading my PC. i have around $200 - $300 at max What should i upgrade? My current PC are G4560 Team eliteplus 8x1 2400mHz 450w power supply and GTX 1050Ti AsRock H110M-HDV 1TB HDD from WD Blue what do you guys think? Thankyou

Hello , I got a GTX 1050Ti 4GB OC , it runs pretty well no problems at all . I got it for 2 years . A store close to my neighborhood just set a Sapphire VGA Radeon RX 570 Nitro+ 4GB for 169 Euros +Resident Evil 2 , +The Division 2 . I can sell my graphics card for about 125 euros and my PC Case...